Information for RPM sg3_utils-1.47-3.oc9.x86_64.rpm

ID106714
Namesg3_utils
Version1.47
Release3.oc9
Epoch
Archx86_64
SummaryUtilities for devices that use SCSI command sets
DescriptionCollection of Linux utilities for devices that use the SCSI command set. Includes utilities to copy data based on "dd" syntax and semantics (called sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check mode and log pages (sginfo, sg_modes and sg_logs); spin up and down disks (sg_start); do self tests (sg_senddiag); and various other functions. See the README, ChangeLog and COVERAGE files. Requires the linux kernel 2.4 series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0) must be used. In the 2.6 series and later other device names may be used as well (e.g. /dev/sda). Also some support for NVMe devices, especially with sg_ses on NVMe enclosures. Warning: Some of these tools access the internals of your system and the incorrect usage of them may render your system inoperable.
Build Time2023-09-18 13:49:13 GMT
Size1.01 MB
30a6180f975b07093d309f8b1386f510
LicenseGPL
Buildrootdist-oc9-build-45079-14591
Provides
sg3_utils = 1.47-3.oc9
sg3_utils(x86-64) = 1.47-3.oc9
Obsoletes No Obsoletes
Conflicts No Conflicts
Requires
/bin/bash
libc.so.6()(64bit)
libc.so.6(GLIBC_2.14)(64bit)
libc.so.6(GLIBC_2.17)(64bit)
libc.so.6(GLIBC_2.2.5)(64bit)
libc.so.6(GLIBC_2.25)(64bit)
libc.so.6(GLIBC_2.3)(64bit)
libc.so.6(GLIBC_2.3.2)(64bit)
libc.so.6(GLIBC_2.32)(64bit)
libc.so.6(GLIBC_2.33)(64bit)
libc.so.6(GLIBC_2.34)(64bit)
libc.so.6(GLIBC_2.7)(64bit)
libsgutils2-1.47.so.2()(64bit)
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rtld(GNU_HASH)
sg3_utils-libs = 1.47-3.oc9
Recommends No Recommends
Suggests No Suggests
Supplements No Supplements
Enhances No Enhances
Files
Page:
1 through 50 of 312 >>>
Name ascending sort Size
/usr/bin/rescan-scsi-bus.sh37.86 KB
/usr/bin/scsi-rescan18.00 B
/usr/bin/scsi_logging_level8.38 KB
/usr/bin/scsi_mandat3.52 KB
/usr/bin/scsi_readcap1.30 KB
/usr/bin/scsi_ready1.09 KB
/usr/bin/scsi_satl3.74 KB
/usr/bin/scsi_start1.25 KB
/usr/bin/scsi_stop1.44 KB
/usr/bin/scsi_temperature936.00 B
/usr/bin/sg_bg_ctl16.98 KB
/usr/bin/sg_compare_and_write22.09 KB
/usr/bin/sg_copy_results25.71 KB
/usr/bin/sg_dd56.45 KB
/usr/bin/sg_decode_sense17.60 KB
/usr/bin/sg_emc_trespass16.26 KB
/usr/bin/sg_format43.30 KB
/usr/bin/sg_get_config30.02 KB
/usr/bin/sg_get_elem_status21.97 KB
/usr/bin/sg_get_lba_status21.62 KB
/usr/bin/sg_ident17.06 KB
/usr/bin/sg_inq105.64 KB
/usr/bin/sg_logs138.32 KB
/usr/bin/sg_luns25.74 KB
/usr/bin/sg_map21.12 KB
/usr/bin/sg_map2626.16 KB
/usr/bin/sg_modes42.20 KB
/usr/bin/sg_opcodes34.87 KB
/usr/bin/sg_persist35.77 KB
/usr/bin/sg_prevent16.54 KB
/usr/bin/sg_raw31.05 KB
/usr/bin/sg_rbuf25.61 KB
/usr/bin/sg_rdac16.66 KB
/usr/bin/sg_read29.62 KB
/usr/bin/sg_read_attr32.18 KB
/usr/bin/sg_read_block_limits16.62 KB
/usr/bin/sg_read_buffer26.88 KB
/usr/bin/sg_read_long17.38 KB
/usr/bin/sg_readcap25.60 KB
/usr/bin/sg_reassign17.23 KB
/usr/bin/sg_referrals17.22 KB
/usr/bin/sg_rep_pip17.45 KB
/usr/bin/sg_rep_zones26.29 KB
/usr/bin/sg_requests21.97 KB
/usr/bin/sg_reset16.77 KB
/usr/bin/sg_reset_wp17.10 KB
/usr/bin/sg_rmsn16.87 KB
/usr/bin/sg_rtpg16.84 KB
/usr/bin/sg_safte25.25 KB
/usr/bin/sg_sanitize30.66 KB
Component of No Buildroots