| Changelog |
* Tue Oct 24 2023 Ze Zhang <bbrucezhang@tencent.com> - 39.32.4-2
- rebrand OpenCloudOS
* Mon Oct 09 2023 Packit <hello@packit.dev> - 39.32.4-1
- Simplify keyboard layout handling, rely on localed more (awilliam)
* Mon Sep 18 2023 Packit <hello@packit.dev> - 39.32.3-1
- Update translations from Weblate for fedora-39 (github-actions)
- liveinst: Don't exec pkexec (rstrode)
- cppcheck: Pretend we know more macros (vslavik)
- Add 'localhost-live' to ignored hostnames for device naming (vtrefny)
- Update translations from Weblate for fedora-39 (github-actions)
- webui: Fix checking for locked LUKS devices (vtrefny)
* Thu Sep 07 2023 Packit <hello@packit.dev> - 39.32.2-1
- Use Firefox environment variables for styling (mkolman)
- Copy /var/lib/gnome-initial-setup/state to installed system (rstrode)
- webui: add pixel test for modify storage test (rvykydal)
- webui: use Blivet-gui name instead of Blivet (rvykydal)
- Revert the ESP maximum size back to 600MiB (richard)
- webui: add tests for modify storage dialogs (rvykydal)
- webui: if blivet-gui exits earlier then the delay update the dialog
(rvykydal)
- webui: do not show rescan dialog in case of critical error (rvykydal)
- webui: make blivet-gui start failure a Critical Error (rvykydal)
- webui: catch errors when spawning blivet-gui (rvykydal)
- webui: add dialogs around launching blivet-gui (rvykydal)
- webui: show error name in Critical Error dialog only if it exists (rvykydal)
- core: Look up live user from PKEXEC_UID (rstrode)
- webui: Show warning when trying to use non-ASCII LUKS passphrase (vtrefny)
- webui: tests: move wait for re-scanning to finish before moving forward with
the tests (kkoukiou)
- webui: When re-scanning don't reset disk selection (kkoukiou)
- Update translations from Weblate for fedora-39 (github-actions)
- j2 render: Preserve hashbangs (vslavik)
- j2 render: Flip logic for empty result (vslavik)
- j2 render: Clean up details (vslavik)
- Update translations from Weblate
* Wed Aug 30 2023 Packit <hello@packit.dev> - 39.32.1-1
- tests: Add a webui test case with EFI system (vtrefny)
- webui: Show error when mounting /boot/efi to a non-EFI partition (vtrefny)
- webui: Add /boot/efi to required mount points when in EFI mode (vtrefny)
- tests: Add support for running webui tests in an EFI VM (vtrefny)
- webui: Do not show unusable devices in mount point assignment (vtrefny)
- Update translations from Weblate for fedora-39 (github-actions)
- webui: Enable mount point mapping based on filesystem not partition (vtrefny)
- webui: add offline version to BZ report dialog (rvykydal)
- webui: monitor network connection state from the Anaconda backend (rvykydal)
- webui: Let error reporting dialog test area auto resize (kkoukiou)
- webui: add basic test for sidebar navigation (#2233805) (rvykydal)
- webui: do not reset validity of step id moving to the same step (#2233805)
(rvykydal)
- webui: Update request IDs when removing mount point row (vtrefny)
- Fix spelling mistake / typo: "Criticall error" (awilliam)
- Disable geolocation on the Fedora Workstation live image (mkolman)
- Set up the fedora-39 branch (mkolman)
- Update translations from Weblate
* Tue Aug 22 2023 Packit <hello@packit.dev> - 39.32-1
- liveinst: Ensure DBUS_SESSION_BUS_ADDRESS is set in live install (rstrode)
- screensaver: Look at $PKEXEC_UID not $USERHELPER_UID (rstrode)
- webui: disable disk selection while disks are being rescanned (kkoukiou)
- webui: show spinner in the disk selection while the backend did not update
(kkoukiou)
- WebUI: update pixel tests for Fedora 40 (jvanderwaa)
- webui: show 25 rows in the bug report log review. (rvykydal)
- webui: add option to report an issue to global menu (rvykydal)
- webui: bump cockpit-* dependencies in updates.img (kkoukiou)
- Update translations from Weblate for master (github-actions)
- release-notes: Document support for compressed kernel modules in Driver Discs
(peter.georg)
- Add documentation about support for compressed kernel modules (peter.georg)
- dd_extract: Update test info to reflect added support for compressed kernel
modules (peter.georg)
- dd_extract: Add test for zstd compressed kernel module (peter.georg)
- dd_extract: Add test for xz compressed kernel module (peter.georg)
- dd_extract: Add support for compressed kernel modules (peter.georg)
- Update translations from Weblate
* Tue Aug 22 2023 Packit <hello@packit.dev> - 39.31-1
- po: Don't try to delete extra.pot (vslavik)
- tests: Rename test to match file with code (vslavik)
- tests: Split localed wrapper from module (vslavik)
- tests: Split live keyboard from module (vslavik)
- tets: Split localization module task tests (vslavik)
- Update translations from Weblate
* Mon Aug 21 2023 Packit <hello@packit.dev> - 39.30-1
- webui: update pixel tests (kkoukiou)
- webui: move groupedAdditional content to PageGroup as specified in the
documentation (kkoukiou)
- webui: port disk selector to the new Select implementation (kkoukiou)
- webui: tests: workaround non-unique selector for the modal (kkoukiou)
- webui: Upgrade to Patternfly 5 (kkoukiou)
- Improve image building docs (mkolman)
- Improve image building docs (mkolman)
- webui: Do not show unused devices on the review page (vtrefny)
- liveinst: Port to polkit (rstrode)
- webui: Fixed typo to launch Live OS ISO with test/webui_testvm.py script
(akankovs)
- webui: Automatically prefill mount point for swap devices (vtrefny)
- manual: Allow using swap without reformatting (vtrefny)
- Update translations from Weblate for master (github-actions)
- webui: Allow changing and removing duplicate required mount points (vtrefny)
- webui: test editing of the log in error reporting dialog (rvykydal)
- Correct spelling of "formatted" (awilliam)
- webui: Remove obsolete check for btrfs reformat support (vtrefny)
- Add realease notes for keyboard from live system (jkonecny)
- Add support for virtual console keymap from live (jkonecny)
- Add live environment keyboard settings support (jkonecny)
- Don't directly copy webui files in makeupdates script (mkolman)
- webui: increase default size of log review text area in critical error dialog
(rvykydal)
- test: allow booting a Live OS ISO with test/webui_testvm.py script (kkoukiou)
- webui: use monospace font in critical error dialog (rvykydal)
- webui: disable error reporting button when reading log for review (rvykydal)
- webui: in Critical Error test click to report to BZ only after the log is
read (rvykydal)
- Move get_missing_keyboard_configuration method (jkonecny)
- Fix typo in the LocalizationInterface docstring (jkonecny)
- Add execWithCaptureAsLiveUser to run as liveuser (jkonecny)
- Extract liveuser data from help to generic tooling (jkonecny)
- make: Document downloading .po from l10n repo (vslavik)
- make: Update POT from branch, not pinned commit (vslavik)
- webui: tests: cleanup webui.log in the end of the test (kkoukiou)
- webui: give better feedback to user after 'Report issue' was clicked
(kkoukiou)
- webui: add testing of log existence in critical error handling (rvykydal)
- webui: translate critical error context only in the dialog (rvykydal)
- webui: use Critical Error dialog for critical failures on Back button
(rvykydal)
- webui: use Critical Error dialog in installation progress (rvykydal)
- webui: use Critical Error dialog to handle erros in getting data about
storage (rvykydal)
- webui: display also the background wizard page with Critical Error dialog
(rvykydal)
- webui: use form layout and add log review of journal (rvykydal)
- webui: add button for reporting to Bugzilla to CriticalError dialog
(rvykydal)
- webui: tests: convert testErrorHandling to a non-destructive test (kkoukiou)
- webui: tests: remove unused variable (kkoukiou)
- webui: use storage exception for critical error dialog test (rvykydal)
- webui: move partition_disk to Storage helper class (rvykydal)
- webui: use Critical Error dialog to handle erros in getting data about
storage (rvykydal)
- webui: use Critical Error dialog for disks rescan (rvykydal)
- webui: use Critical Error dialog in installation progress (rvykydal)
- webui: add context to Critical Error dialog (rvykydal)
- webui: Prevent the Anaconda window from being closed by keyboard shortcuts
(akankovs)
- webui: fix make rsync not updating the test VM (kkoukiou)
- webui: Back/Next button are not localized (akankovs)
- webui: tests are expecting #mount-point-mapping-table-row-{rowId}-format
selector (kkoukiou)
- webui: fix TestStorageMountPoints.testBasic (rvykydal)
- webui: tests: use m.write for writing files (kkoukiou)
- webui: tests: extend the TestInstallationProgress test to include reboot
(jvanderwaa)
- webui: introduce a button to launch blivet GUI (kkoukiou)
- webui: when using the remote option just relax the address that cockpit-ws
binds to (kkoukiou)
- webui: After returning to InstallationLanguage, the next button does not work
(akankovs)
- Remove PatternFly workaround from build.js (mkolman)
- spec: Bump required blivet version to 3.8.1 (vtrefny)
- webui: Changing of checkbox for switch (akankovs)
- iscsi: Allow changing iSCSI initiator name once set (vtrefny)
- Update translations from Weblate for master (github-actions)
- webui: fix logic for when to re-create the partitioning (kkoukiou)
- webui: compress dist files also on development builds (kkoukiou)
- webui: webui-desktop: don't use tls when spawning cockpit-ws (kkoukiou)
- docs: Add translation bumper to CI status page (vslavik)
- webui: extend condition that blocks rendering of the installation scenario
step (kkoukiou)
- Update translations from Weblate for master (github-actions)
- webui: do not keep in the central state all possible created partitioning
objects (kkoukiou)
- Update translations from Weblate
* Thu Aug 03 2023 Packit <hello@packit.dev> - 39.29-1
- webui: spread the state update function into seperate hooks and useMemo
(kkoukiou)
- webui: Clear mount point and reformat flag for removed requests (vtrefny)
- manual: Return error when trying to use removed nested subvolumes (vtrefny)
- webui: show 'format as' only when reformatting partition (kkoukiou)
- webui: Empty value for input should not be null nor undefined (mmarusak)
- webui: Define unique key for list on review page (mmarusak)
- webui: Show partition size on review page (mmarusak)
- manual: Ignore no-op mount point requests (vtrefny)
- webui: when the disk is empty hide "Use free space" scenario (skobyda)
- webui: InstallationScenario: assume non-availability (kkoukiou)
- webui: update only the needed encryption state attributes (kkoukiou)
- webui: scenarios is a global variable, no need to pass it as propertry
(kkoukiou)
- webui: tests: use 'click' helper test method on radio buttons (kkoukiou)
- webui: tests: next button is enabled before the screenshot (kkoukiou)
- webui: update scenario availability state only after parsing all scenarios
(kkoukiou)
- Ignore btrfs snapshots in mountpoint assignment (vtrefny)
- webui: start using payload from the bots repository (kkoukiou)
- webui: make 'Next' by default 'disabled' and let each component update it
(kkoukiou)
- webui: Enable source maps and enable minification (mkolman)
- webui: Add mount point assignment test case with LVM (vtrefny)
- webui: Add mount point assignment test case with btrfs subvolumes (vtrefny)
- webui: remove limitation for formating btrfs subvolumes (kkoukiou)
- add another encrypted disk to test case (mahmoud-mahgoub1)
- l10n: Lock to current HEAD (vslavik)
- make: Add target to automatically bump l10n ref (vslavik)
- make: Move l10n constants from configure.ac to include file (vslavik)
- make: Add l10n config file with SHA variable, use (vslavik)
- Update translations from Weblate
* Tue Aug 01 2023 Packit <hello@packit.dev> - 39.28-1
- webui: update cockpit dependencies to the latest released in rawhide
(kkoukiou)
- webui: tests: add method to partition disk (tomatus777)
- webui: Quit button does not work on the Live image (akankovs)
- webui: Update and simplify review page (mmarusak)
- docs: use correct path for VM command (90795679+MahmoudHamdy02)
- webui: Translate strings used in cockpit.format (mmarusak)
- Allow reformatting of 'plain' btrfs volumes (vtrefny)
- webui: catch also exceptions from GetDevicesAction when rescanning disks
(rvykydal)
- webui: unpack GetDiskFreeSpace and GetDiskTotalSpace from array (skobyda)
- webui: tests: remove duplicate pixel tests for the first storage page
(kkoukiou)
- webui: tests: create a variable with the table row selector (kkoukiou)
- webui: tests: simplify the open test helper (kkoukiou)
- webui: tests: remove redundant check for disabled 'Next' button (kkoukiou)
- webui: tests: add helper method for setting a valid password (kkoukiou)
- webui: rename some components to more self explanatory names (kkoukiou)
- webui: fix prefix for identifiers of the installation scenarios (kkoukiou)
- webui: remove obsolete TODO (kkoukiou)
- webui: change Alert on review screen to HelperText (mmarusak)
- webui: Introduce cockpit-style debug() helper (martin)
- Revert "Add GUI option for installing 64k ARM kernel" (jkonecny)
- Revert "Add TUI for installing non-standard kernels" (jkonecny)
- webui: debounce changes on the password confirmation field (kkoukiou)
- webui: docs: fix documentation on how to re-create the updates.img (kkoukiou)
- Simplify submodule subscription to storage changes (vslavik)
- Enable iterating over managed modules (vslavik)
- Use the new class in relevant Storage submodules (vslavik)
- webui: Disable minification (mkolman)
- Add a class for modules that keep track of storage (vslavik)
- Use the submodule manager in Storage (vslavik)
- Use the submodule manager in Runtime (vslavik)
- Add a submodule manager class (vslavik)
- webui: redesign and refactor custom partition mapper (kkoukiou)
- webui: Add Firefox theme for use on Live media (mkolman)
- webui: tests: Fix end to end tests to work with new storage design (zveleba)
- webui: tests: Make reboot button selector more specific (zveleba)
- webui: use term 'devices' not 'partitions' in the custom mountpoint step
(kkoukiou)
- webui: debounce password quality checks to be done only once per 300ms
(kkoukiou)
- tests: Update reference images for mountpoint assignment (vtrefny)
- webui: Use device name instead of path as identifier (vtrefny)
- tests: Fix expected device specs in check-storage (vtrefny)
- webui: Use custom label when creating btrfs for tests (vtrefny)
- Use blivet mount options for new subvolumes in mountpoint assignment
(vtrefny)
- tui: Preserve blivet mount options in mountpoint assignment (vtrefny)
- tui: allow to 'format' btrfs subvolumes in mount point assignment (rvykydal)
- tui: Use name instead of path for devspec in mountpoint assignment (vtrefny)
- tui: Use all btrfs subvolumes in mountpoint assignment (vtrefny)
- webui: Update pixel tests broken from localization updates (kkoukiou)
- ruff: Silence new warnings with 0.0.280 (vslavik)
- webui: rename custom mountpoint assignment step to mountpoint mapper
(kkoukiou)
- Check for webui with property (vslavik)
- Update translations from Weblate
* Wed Jul 26 2023 Adam Williamson <awilliam@redhat.com> - 39.27-3
- Revert *both* commits from the broken PR, not just one
* Wed Jul 26 2023 Adam Williamson <awilliam@redhat.com> - 39.27-2
- Revert "Port GUI kernel switcher for ARM 64k", it's broken, causes crashes
* Tue Jul 25 2023 Packit <hello@packit.dev> - 39.27-1
- webui: if no scenario is available for selection show the options but
disabled (kkoukiou)
- webui: new design for welcome page in live image (kkoukiou)
- webui: rephrase text hints for disabled options (kkoukiou)
- webui: make all actions return anonymous functions (kkoukiou)
- webui: re-calculate the scenarios only if the selected devices or device data
changed (kkoukiou)
- webui: tests: use installer helper 'reach' method for moving ahead multiple
steps (kkoukiou)
- webui: fix typo 'screenWarning' for custom mountpoint selection (kkoukiou)
- webui: select 'vda' disk instead of the scsi ram disk in the test (kkoukiou)
- webui: safeguard access to deviceData properties to avoid crashes while state
is not fully loaded (kkoukiou)
- webui: return a Promise when fetching all device data (kkoukiou)
- webui: edit style files with errors (akankovs)
- webui: setup lint for style files (akankovs)
- tests: Fix expected value for "has_key" with latest blivet (vtrefny)
- webui: tests: make some more tests non-destructive (kkoukiou)
- webui: don't crash in case a AUTOMATIC partitioning object exists (kkoukiou)
- webui: the encryption password screen is not subpage anymore (kkoukiou)
- webui: Check for beta variable being undefined (mkolman)
- Use DBus API to check for final release (mkolman)
- webui: introduce an About screen (acruzgon)
- Move more product-related values to the module itself (vslavik)
- Simplify product-related constants (vslavik)
- Drop the isFinal UI constructor parameter from WebUI (vslavik)
- webui: do not silence exception when parsing languages from backend
(kkoukiou)
- webui: language information should be fetched also for live media (kkoukiou)
- Add minimal documentation to pyanaconda.product (vslavik)
- Add IsFinal property to the UI module (vslavik)
- webui: accept conf being undefined (yet) during a CriticalError (rvykydal)
- webui: design adjustment on the disk encryption screen (kkoukiou)
- spec: Honor 79 char limit for descriptions (vslavik)
- webui: allow critical errors also in the first load of the application
(kkoukiou)
- Add TUI for installing non-standard kernels (ozobal)
- Add GUI option for installing 64k ARM kernel (ozobal)
- Remove deprecated conf: kickstart_modules, addons_enabled (vslavik)
- Update translations from Weblate
* Wed Jul 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 39.26-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
* Tue Jul 18 2023 Packit <hello@packit.dev> - 39.26-1
- webui: introduce dialog to unlock existing locked LUKS partitions (kkoukiou)
- Introduce 'has_key' property in the attrs of DeviceFormatData object
(kkoukiou)
- makeupdates: Now targeting python 3.12 (vslavik)
- webui: tests: more anaconda state cleanup for test teardown (kkoukiou)
- webui: tests: wait for data initialization to finish before proceeding with
the tests (kkoukiou)
- Update License tag in the spec file template to use SPDX syntax (dcantrell)
- webui: Introduce new Critical error component (kkoukiou)
- webui: return a promise when fetching all device data (kkoukiou)
- webui: create new dbus client objects when address changes (kkoukiou)
- ruff: Enable flake8-simplify checks (vslavik)
- Fix ruff detections for RUF002 & RUF003 (vslavik)
- ruff: Enable ruff checks (vslavik)
- ruff: Enable flake8 logging format checks (vslavik)
- ruff: Enable flake8 import conventions checks (vslavik)
- Fix ruff detections after enabling pycodestyle warnings (vslavik)
- ruff: Enable pycodestyle warning checks (vslavik)
- Fix ruff detections after enabling pylint checks (vslavik)
- ruff: Enable most of the "pylint" checks (vslavik)
- webui: simplify webui-desktop script (kkoukiou)
- Add possibility to run pylint-only test (jkonecny)
- webui: tests: reset selected disks between test runs (kkoukiou)
- webui: tests: use busctl instead of dbus-send in the test helper (kkoukiou)
- webui: localization: fix react warning about missing key (kkoukiou)
- webui: wait for all languages to be loaded before rendering languages page
(kkoukiou)
- Update translations from Weblate
* Thu Jul 13 2023 Packit <hello@packit.dev> - 39.25-1
- webui: replace the Tooltip with HelperText in Storage devices step (acruzgon)
- webui: Hide the language selection screen on Live images (akankovs)
- webui: tests: switch some storage tests to nondestructive (kkoukiou)
- webui: fix disk selection not working when moving back to the disk selection
screen (kkoukiou)
- webui: tests: check status of the bulk select checkbox in the helper
functions (kkoukiou)
- Fix and add tests for the preexec changes (vslavik)
- webui: tests: wait for the checkboxes to get initialized before taking
screenshot (kkoukiou)
- Change startProgram preexec check to early exit style (vslavik)
- Add do_preexec propagation also to execWithCapture and shutdownServer
(vslavik)
- webui: add some helper debug logs in the storage page (kkoukiou)
- webui: fetch device data on the initial app load (kkoukiou)
- webui: correct the last partitioning getter (kkoukiou)
- webui: pin down cockpit-ws and cockpit-bridge versions before the python
bridge release (kkoukiou)
- webui: tests: implement a 'reach' helper method (kkoukiou)
- Squashed 'translation-canary/' changes from 3bc2ad68a8..5bb81253b4 (vslavik)
- webui: tests: restart cockpit-ws between tests (kkoukiou)
- Use correct call assert method in flapak test (vslavik)
- Handle subprocess disallowing preexec during shutdown (awilliam)
- Update translations from Weblate
* Tue Jul 11 2023 Packit <hello@packit.dev> - 39.24-1
- webui: extend the list of the data we need to wait for before showing the app
(kkoukiou)
- webui: tests: attempt to rebustify tests by more carefully implementing the
page enter (kkoukiou)
- webui: test: extend allowed journal messages for language tests (kkoukiou)
- webui: tests: adjust next and back helper methods (kkoukiou)
- webui: pin down cockpit-* packages versions for gating purposes (kkoukiou)
- webui: if device selection changed since last partitioning request redo the
partitioning (kkoukiou)
- webui: Disable strict host checking in SSH config snippet (mkolman)
- Update translations from Weblate
* Tue Jul 04 2023 Adam Williamson <awilliam@redhat.com> - 39.23-3
- Fix the patch to default to doing preexec_fn (duh)
* Tue Jul 04 2023 Adam Williamson <awilliam@redhat.com> - 39.23-2
- Backport PR #4879 to fix shutdown with Python 3.12
* Mon Jul 03 2023 Packit <hello@packit.dev> - 39.23-1
- webui: store system language information in the global store (kkoukiou)
- webui: Start Web UI when the anaconda-webui package is installed (mkolman)
- webui: remove redundant console.info (kkoukiou)
- webui: always disable next button if the form is invalid (kkoukiou)
- webui: when re-scanning disks or loading initial date disable the re-scan
button (kkoukiou)
- webui: mount point assignment support (jvanderwaa)
- webui: remove forgotten console.info object (kkoukiou)
- WebUI: Change help drawer width (ozobal)
- webui: show empty state while the selected scenario is not available
(kkoukiou)
- webui: the value we want to take effect should be last in destructured object
(kkoukiou)
- Fix cppcheck failure on gettext.h (jkonecny)
- Inline testlib.sh file (jkonecny)
- webui: Make RPM building DNF5 compatible (mkolman)
- Allow showing passphrase when unlocking LUKS device (jstodola)
- Update translations from Weblate
* Tue Jun 27 2023 Python Maint <python-maint@redhat.com> - 39.22-2
- Rebuilt for Python 3.12
* Tue Jun 27 2023 Packit <hello@packit.dev> - 39.22-1
- Update the bundled cockpit-desktop script (martin.kolman)
- Revert "Revert "webui: start using custom webui-desktop script instead of
cockpit-desktop"" (martin.kolman)
- docs: Document the distribution component (vponcova)
- Update translations from Weblate
* Tue Jun 27 2023 Packit <hello@packit.dev> - 39.21-1
- webui: Fix handling of END2END env variable in WebUI tests (zveleba)
- webui: tests: wait for the webui to update disk selection instead of
asserting the state (kkoukiou)
- webui: use the store as single source of truth for disk selection (kkoukiou)
- webui: split actions per data type (kkoukiou)
- webui: split reducers acording to the data type (kkoukiou)
- webui: use useReducer also for language state collection (kkoukiou)
- webui: start using useReducer for managing complicated state objects
centrally (kkoukiou)
- WebUI: Switch Quit/Reboot button in Progress spoke (ozobal)
- WebUI: update pixel tests for new tasks container (jvanderwaa)
- WebUI: Use Cockpit's os-release implementation (jvanderwaa)
- webui: test: ensure that disk selection is updated before taking screenshot
(kkoukiou)
- webui: tests: increase specificity for the disk toggle selector (kkoukiou)
- webui: tests: wait for drawer status instead of asserting it directly
(kkoukiou)
- webui: tests: don't create screenshots in step_logger decorator for non
end2end tests (kkoukiou)
- WebUI: Convert InstallationProgress to function (ozobal)
- webui: tests: rename IntegrationTest class and associated file to End2EndTest
(kkoukiou)
- webui: tests: rename 'integration' directory to 'end2end' (kkoukiou)
- webui: remove some trailing whitespace from test files (kkoukiou)
- Update translations from Weblate
* Mon Jun 26 2023 Python Maint <python-maint@redhat.com> - 39.20-2
- Rebuilt for Python 3.12
* Tue Jun 20 2023 Packit <hello@packit.dev> - 39.20-1
- webui: add PRETTY_NAME to use in title instead of anaconda generic title
(acruzgon)
- Revert "WebUI: explicitly specify GITHUB_BASE for pixel test commands"
(kkoukiou)
- webui: add expected journal messages coming from cockpit's new python bridge
(kkoukiou)
- WebUI: Remove centering from loading screen (ozobal)
- webui: show partitions of local standard disks (kkoukiou)
- webui: increase timeout when downloading anaconda-webui rpm dependencies
(acruzgon)
- webui: add PageSection variant 'wizard' to give Wizard in-page styling
(acruzgon)
- webui: use fmt_to_fragments so that the translation does not break (kkoukiou)
- Import BlockDev from blivet instead of gi (vtrefny)
- Stop infinite wait for CDROM when KS is processed (#2209599) (jkonecny)
- Update translations from Weblate
* Thu Jun 15 2023 Python Maint <python-maint@redhat.com> - 39.19-2
- Rebuilt for Python 3.12
* Tue Jun 13 2023 Packit <hello@packit.dev> - 39.19-1
- webui: remove redundant dashes from README (kkoukiou)
- docs: remove confusion for which toolbox to use for webui development
(kkoukiou)
- webui: enable linter for webui CI runs (kkoukiou)
- Check minimal LUKS passphrase length in FIPS mode for Kickstart (vslavik)
- GUI: Require 8 chars of LUKS passwords in FIPS mode (vslavik)
- Use Firefox in kiosk mode for running the Web UI locally (mkolman)
- Do not print error on inst.ks=cdrom|hd (#2077045) (jkonecny)
- storage: fix resolving btrfs subvolumes from fstab (#2186158) (rvykydal)
- storage: improve btrfs devices removing in custom partitioning (#2186158)
(rvykydal)
- Don't override blivet's preferred disk label type by default (awilliam)
- Update translations from Weblate
* Tue Jun 06 2023 Packit <hello@packit.dev> - 39.18-1
- webui: change the language direction when language changes (kkoukiou)
- Fix webui-tests workflow waiving (zveleba)
- Add github-pr and xunit reporting to webui-tests workflow (zveleba)
- Simplify user and group name test (vslavik)
- Clean up imports (vslavik)
- Block more usernames as reserved (vslavik)
- Remove unused/duplicate WebUI e2e testplan (zveleba)
- If nano is the default editor, use it for bug reports (vslavik)
- webui: Fix malformed XML (vslavik)
- WebUI: re-design the review screen for custom mount point (jvanderwaa)
- WebUI: explicitly specify GITHUB_BASE for pixel test commands (jvanderwaa)
- Reload translations dynamically without a browser reload (jvanderwaa)
- Re-render app when language changes (jvanderwaa)
- Update translations from Weblate
* Tue May 30 2023 Packit <hello@packit.dev> - 39.17-1
- Remove unused parameter anaconda (vslavik)
- Remove unused parameter opts (vslavik)
- Remove unused parameter pass_to_boss (vslavik)
- Rename parameters ks->ks_path (vslavik)
- WebUI: move alert under header for review screen (jvanderwaa)
- Reindent test file list (vslavik)
- Fix ruff detections (vslavik)
- Add ruff, a very fast linter (vslavik)
- Move the User Interface module under Runtime (vslavik)
- Increase the minimum EFI System Partition (ESP) size to 500MiB (richard)
- Update translations from Weblate
* Wed May 24 2023 Petr Pisar <ppisar@redhat.com> - 39.16-2
- Rebuild against rpm-4.19 (https://fedoraproject.org/wiki/Changes/RPM-4.19)
* Tue May 23 2023 Packit <hello@packit.dev> - 39.16-1
- Change driver_updates exit info messages to debug (#2154904) (jkonecny)
- Add readme for the conf.d drop dir (vslavik)
- webui: use the reason in title of disabled partitioing warning (rvykydal)
- WebUI: improve handling of removal of testvm's (jvanderwaa)
- webui: [pixel-tests] update microcopy of "erase-all" storage scenario
(rvykydal)
- webui: update microcopy of "erase-all" storage scenario (rvykydal)
- Add a draft release note for the Runtime module (vslavik)
- Add tests for the Runtime and Dracut modules (vslavik)
- Add the dracut command module (vslavik)
- Add the Runtime module (vslavik)
- Add release notes packaging Web UI (jkonecny)
- Fix release notes link consistency (jkonecny)
- docs: Add other f38 release notes (vslavik)
- docs: Add vponcova f38 release notes (vslavik)
- docs: Add F38 release notes for vslavik PRs (vslavik)
- Create Fedora 38 release notes (jkonecny)
- Remove link to the release notes template.rst (jkonecny)
- WebUI: close embedded panel when clicking prev/next (jvanderwaa)
- WebUI: update ESLINT to LINT (jvanderwaa)
- WebUI: use StorageScenarioId in all components (jvanderwaa)
- WebUI: set default storage scenario based on scenarios constant (jvanderwaa)
- webui: use the same naming for disk images created in machine_install
(rvykydal)
- webui: consolidate creating images in machine_install (rvykydal)
- Update translations from Weblate
* Fri May 19 2023 Petr Pisar <ppisar@redhat.com> - 39.15-2
- Rebuild against rpm-4.19 (https://fedoraproject.org/wiki/Changes/RPM-4.19)
* Tue May 16 2023 Packit <hello@packit.dev> - 39.15-1
- tests: Remove eslint unit test (vslavik)
- docs: Add WebUI integration tests badge to CI status (vslavik)
- Add new integration test cases: Storage encryption and Wizard navigation
(zveleba)
- webui: commonLanguages can contains codes that are not in the locales the API
returns (kkoukiou)
- webui: migrate to async syntax for promises in review screen (rvykydal)
- localization: add Localization section and use_geolocation to configuration
(rvykydal)
- WebUI: fix spelling of encrypted (jvanderwaa)
- webui: create disk images for VirtInstallMachine in advance (rvykydal)
- Add new post_install_step function to IntegrationTest class (zveleba)
- Add missing log_step decorators to storage helper functions (zveleba)
- Update translations from Weblate
* Tue May 09 2023 Packit <hello@packit.dev> - 39.14-1
- webui: better source maps (kkoukiou)
- conf: Missing geolocation provider URL disables it (vslavik)
- webui: [pixel tests] update review screen for v1 of autopartiotioning
(rvykydal)
- webui: update review screen for v1 of autopartiotioning (rvykydal)
- webui: reset partitioning on going Back from review screen (rvykydal)
- webui: don't use global scope for translated strings (kkoukiou)
- Move from webpack to esbuild bundler (kkoukiou)
- webui: some invalid code fixes (kkoukiou)
- Update translations from Weblate
* Thu May 04 2023 Packit <hello@packit.dev> - 39.13-1
- WebUI: fix eslint error (jvanderwaa)
- WebUI: run eslint in CI (jvanderwaa)
- Update translations from Weblate
* Tue Apr 25 2023 Packit <hello@packit.dev> - 39.12-1
- WebUI: [pixel tests] Hide progress stepper after finishing (rvykydal)
- WebUI: allow webui_testvm to pick up development files (jvanderwaa)
- pyanaconda: start cockpit-ws from a systemd unit (jvanderwaa)
- webui: reset storage backend before autopart test (rvykydal)
- WebUI: Update test for Hide progress stepper after finishing (rvykydal)
- WebUI: Hide progress stepper after finishing (ozobal)
- webui: [pixel tests] fix spacing of Storage Congfiguration options (rvykydal)
- webui: fix spacing of Storage Congfiguration options (rvykydal)
- Fix indefinite articles before "NFS" (jstodola)
- Remove redundant return (vslavik)
- Fix virt-install cockpit run on fedora-X images (jkonecny)
- WebUI: Dynamically choose Quit/Reboot button label (ozobal)
- WebUI: use Cockpit's run-tests (jvanderwaa)
- WebUI: introduce a new MachineCase subclass for VirtInstallMachine
(jvanderwaa)
- WebUI: touch dist/manifest.json explicitly (jvanderwaa)
- Run webui-tests workflow on a testing runner for some time (rvykydal)
- Add GH workflow to run webui integration tests in Permian on PR (rvykydal)
- Update translations from Weblate
* Tue Apr 18 2023 Packit <hello@packit.dev> - 39.11-1
- Add missing documentation about OEMDRV (#2171811) (jkonecny)
- gui: Simplify invalid timezone handling. (vslavik)
- Try to set timezone from language on welcome spoke (vslavik)
- Revert "Remove the function get_locale_timezones" (vslavik)
- Always set timezone with priority (vslavik)
- Add timezone priority to module backend and interface (vslavik)
- Fix logging to packaging.log (vponcova)
- exception: only attach existent and non-empty files (#2185827) (awilliam)
- WebUI: force symlink re-creation (jvanderwaa)
- Don't set the __doc__ attribute (vponcova)
- Remove the DeviceSetupError exception (vponcova)
- Remove SetupDevice and TeardownDevice from DeviceTreeHandlerInterface
(vponcova)
- Remove unused constants (vponcova)
- Remove the DNFManager.remove_repository method (vponcova)
- Remove the DNFManager.reset_substitution method (vponcova)
- Remove the DNFManager.is_environment_valid method (vponcova)
- Remove resolve_device from pyanaconda.payload.utils (vponcova)
- Remove the TreeInfoMetadata._root_url attribute (vponcova)
- po: fix (jvanderwaa)
- WebUI: don't set step in React state (jvanderwaa)
- WebUI: avoid relying on automated semicolon insertion (jvanderwaa)
- .github: add codeql workflow for JavaScript (jvanderwaa)
- WebUI: correct setState calls for SearchInput (jvanderwaa)
- Update translations from Weblate
* Tue Apr 11 2023 Packit <hello@packit.dev> - 39.10-1
- webui: update reference images (kkoukiou)
- webui: update CockpitPoWebpackPlugin and adjust configuration options
(kkoukiou)
- webui: update run-tests script (kkoukiou)
- webui: build: Move to a webpack module (kkoukiou)
- webui: modernize the makefile (kkoukiou)
- webui: update integration tests for v1 of autopartitioning (rvykydal)
- Fix wrong dracut timeout message (jkonecny)
- Run webui-periodic workflow on a testing runner for some time (rvykydal)
- Add GH workflow for periodic webui integration tests in Permian (rvykydal)
- webui: update pixeltest reference (rvykydal)
- webui: update microcopy plurals to remove "(s)" suffixes (rvykydal)
- webui: add pixel tests for the new storage config screens (rvykydal)
- webui: add test for autopartitioning (rvykydal)
- webui: test that disk selection persists Next and Back (INSTALLER-3029)
(rvykydal)
- webui: make not enough space warning in detail a phrase (rvykydal)
- webui: add content for autopartitioning options details (rvykydal)
- webui: allow weak passwords for disk encryption (rvykydal)
- webui: fix tests for split Installation Destination step (rvykydal)
- webui: add TODO for applyPartitioning (rvykydal)
- webui: move some subcomponents out of components (rvykydal)
- webui: implement Disk Encryption subscreens in scope of the single substep
(rvykydal)
- webui: log exception in case of partitioning application error (rvykydal)
- webui: keep disk selection in the UI when going back (rvykydal)
- webui: add a tooltip hint to disabled autopartitioning scenarios (rvykydal)
- webui: connect Storage Configuration to backend initalization mode (rvykydal)
- webui: implement Storage Configuration (guided partitioning) (rvykydal)
- webui: move storage validation to the last storage substep (rvykydal)
- webui: add Disk Encryption subscreen skeleton (rvykydal)
- webui: add Storage Configuration subscreen skeleton (rvykydal)
- webui: move disk selection into a wizard substep (rvykydal)
- Move the validation report to the payload manager (vponcova)
- Use the DNF module in TUI and GUI (vponcova)
- Extend the DNF module (vponcova)
- Handle an undefined release version (vponcova)
- Move the generate_treeinfo_repository function (vponcova)
- Create the check_instances function for unit tests (vponcova)
- oemdrv: wait up to 5 seconds for disks to be handled (rmetrich)
- Update translations from Weblate
* Tue Apr 04 2023 Packit <hello@packit.dev> - 39.9-1
- fsset: Catch SwapSpaceError when trying to activate swaps (vtrefny)
- Add tests for threads (vslavik)
- Add and use thread_manager.add_thread() (vslavik)
- Use the simplified HDD source in the UI (vponcova)
- Simplify the HDD source (vponcova)
- Add the create_hdd_url function (vponcova)
- Move thread tests according to renaming (vslavik)
- Compatibility layer for threading->core.threads (vslavik)
- Rename core module threading to threads (vslavik)
- Move threading from pyanaconda to pyanaconda.core (vslavik)
- Rename threadMgr to thread_manager (vslavik)
- Allow showing proxy passwords on the installation source spoke (jstodola)
- Allow showing passwords on the subscription spoke (jstodola)
- Always hide the user password by default (jstodola)
- Always hide the root password by default (jstodola)
- Update translations from Weblate
* Tue Mar 28 2023 Packit <hello@packit.dev> - 39.8-1
- Move ostreecontainer deps to install-img-deps (jkonecny)
- Add 'vga' to the list of preserved kernel arguments (#2176782) (awilliam)
- Improve documentation of our Cockpit CI tests (jkonecny)
- Download cockpit rpms during build (jkonecny)
- Add --strict mode to makeupdates script (jkonecny)
- docs: Document the `autopart --nohome` issue (vponcova)
- Remove a react-core tarball (mkolman)
- WebUI tweak local test execution (jkonecny)
- Add missing deps to install_dependencies.sh (jkonecny)
- WebUI: do not force to manually remove updates.img (jkonecny)
- Update translations from Weblate
* Tue Mar 28 2023 Packit <hello@packit.dev> - 39.7-1
- Remove the SourceFactory class from the pyanaconda.payload module (vponcova)
- Simplify creation of a source based on its URL (vponcova)
- Protect the specified devices with all their ancestors (vponcova)
- Protect HDD sources from the Payloads module (vponcova)
- Use the simplified NFS source in the UI (vponcova)
- Simplify the NFS source (vponcova)
- Improve access to the repository configuration of a source (vponcova)
- Protect the stage2 device from the Storage module (vponcova)
- Don't protect unavailable devices (vponcova)
- Update pixel tests for a new cockpit-ws (jkonecny)
- webui: update links for downloading cockpit-ws and cockpit-bridge RPMs
(kkoukiou)
- Don't parse additional repositories during start-up (vponcova)
- Implement needs_network for rpm_ostree_container (#2125655) (jkonecny)
- Move rpm-ostree deps from Lorax to Anaconda (#2125655) (jkonecny)
- Deduplicate test data creation func in rpm ostree (jkonecny)
- Add release note for ostreecontainer (#2125655) (jkonecny)
- Add new OSTree container source test (#2125655) (jkonecny)
- Enable RPM OSTree from container source in payload (#2125655) (jkonecny)
- Add RPM OSTree source from container (#2125655) (jkonecny)
- WebUI: Fix keyboard navigation on welcome screen (ozobal)
- Add test step logging and screenshots to WebUI tests (zveleba)
- Ignore newly found pylint detections (vslavik)
- Fix network configuration from kickstart in intramfs (rvykydal)
- Update translations from Weblate
* Tue Mar 21 2023 Packit <hello@packit.dev> - 39.6-1
- Adjust to pykickstart moving new network commands to F39 (awilliam)
- Generate the ostreesetup kickstart command (vponcova)
- Simplify the URL source (vponcova)
- Add support for sources that provide access to a repository (vponcova)
- Protect the RPM source provided by Dracut (vponcova)
- Show the RPM source provided by Dracut in GUI (jkonecny)
- Rename widgets for auto-detected installation media (vponcova)
- Drop the stage2 support from the CDROM source (vponcova)
- Simplify the default source selection of the RPM sources (jkonecny)
- Add support for an RPM source defined by a local path to a repository
(jkonecny)
- webui: add hint for running tests locally with selinux failures (rvykydal)
- For user unit tests, provide valid login.defs (vslavik)
- Don't copy binaries in user unit tests (vslavik)
- Don't create empty login.defs (vslavik)
- Revert "infra: Disable failing tests that call useradd and groupadd"
(vslavik)
- Set correctly NM props for DNS kickstart options (vslavik)
- fedora-welcome: Default to light style (fmuellner)
- fedora-welcome: Swap buttons (fmuellner)
- fedora-welcome: Drop icons from buttons (fmuellner)
- fedora-welcome: Use libadwaita (fmuellner)
- fedora-welcome: Use actions instead of clicked callbacks (fmuellner)
- fedora-welcome: Port to GTK4 (fmuellner)
- fedora-welcome: Tweak button labels (fmuellner)
- fedora-welcome: Adjust wording of description (fmuellner)
- fedora-welcome: Rename .desktop file (fmuellner)
- fedora-welcome: Add back app icon (fmuellner)
- fedora-welcome: Replace grids with boxes (fmuellner)
- fedora-welcome: Remove secondary screen (fmuellner)
- fedora-welcome: Launch .desktop file instead of spawning command (fmuellner)
- fedora-welcome: Fix passing command line flags (fmuellner)
- fedora-welcome: Use standard Javascript modules (fmuellner)
- fedora-welcome: Split out application subclass (fmuellner)
- fedora-window: Use show_all() only internally (fmuellner)
- fedora-welcome: Stop using deprecated Lang module (fmuellner)
- fedora-welcome: Reindent WelcomeWindow class (fmuellner)
- fedora-welcome: Use consistent quotes (fmuellner)
- fedora-welcome: Use template strings (fmuellner)
- fedora-welcome: Use consistent braces (fmuellner)
- fedora-welcome: Remove unused imports (fmuellner)
- Fix saving DNS search domains to kickstart (vslavik)
- Update translations from Weblate
* Fri Mar 17 2023 Adam Williamson <awilliam@redhat.com> - 39.5-2
- Backport PR #4624 to fix anaconda with pykickstart 3.47
* Tue Mar 14 2023 Packit <hello@packit.dev> - 39.5-1
- Revert "Enable TFTP support (#2071350)" (vslavik)
- CONTRIBUTING: Add note about systemd-boot (jeremy.linton)
- release-notes: Document that its possible to install with systemd-boot
(jeremy.linton)
- Add kickstart/command line control to enable systemd-boot (jeremy.linton)
- add x86 systemd-boot option (jeremy.linton)
- Add the grub packages removed from comps to grub installs (jeremy.linton)
- Add EFISYSTEMD class and enable aarch64 (jeremy.linton)
- Hoist firmware bit size check (jeremy.linton)
- storage: Add a systemd class for systemd-boot (jeremy.linton)
- bootloader/base.py drop stage2 requirement (jeremy.linton)
- Retranslate welcome screen more simply (vslavik)
- Clean up ISO option in source selection spoke (ozobal)
- Clean up strings in payload tasks (vponcova)
- Clean up tasks for setting up and tearing down sources (vponcova)
- Enable TFTP support (#2071350) (Inperpetuammemoriam)
- Update translations from Weblate
* Tue Mar 07 2023 Packit <hello@packit.dev> - 39.4-1
- Verify repomd hashes with a task (vponcova)
- WebUI: Give "Quit" button correct margin (ozobal)
- Remove the tx_id functionality (vponcova)
- Don't generate a repository name of the URL source (vponcova)
- Fix translations of the pre-release warning dialog (#2165762) (vponcova)
- Validate the CDN source early (vponcova)
- Add the ValidatePackagesSelectionWithTask DBus method (vponcova)
- Remove the get_base_repo_url method of the TreeInfoMetadata class (vponcova)
- Load treeinfo metadata with the LoadTreeInfoMetadataTask task (vponcova)
- Allow to get the base and root treeinfo repositories (vponcova)
- Create the generate_treeinfo_repository function (vponcova)
- Create the update_treeinfo_repositories function (vponcova)
- password tooltip text adapt language (iasunsea)
- Update translations from Weblate
* Tue Feb 28 2023 Packit <hello@packit.dev> - 39.3-1
- Add config for Fedora Designsuite (luya)
- docs: Update contrib guide for current branching (vslavik)
- efi: deal with verbose by default output from efibootmgr (marmarek)
- Update translations from Weblate
* Tue Feb 21 2023 Packit <hello@packit.dev> - 39.2-1
- Add DNS search and ignore options from kickstart (vslavik)
- Adjust templates after F38 branching (mkolman)
- webui: Fix missing space (vslavik)
- Update translations from Weblate
* Thu Feb 16 2023 Packit <hello@packit.dev> - 39.1-1
- Fix new pylint detections (vslavik)
- Update translations from Weblate
* Wed Feb 15 2023 Packit <hello@packit.dev> - 38.23-1
- Templatize pykickstart version in dracut code (vslavik)
- Apply --noverifyssl option for liveimg kickstart command (jstodola)
- Update translations from Weblate
* Tue Feb 14 2023 Packit <hello@packit.dev> - 38.22-1
- Web UI: Make Pre-release label look clickable (ozobal)
- Web UI: Update help in Installation destination (ozobal)
- Be more indulgent when reclaiming disk space (jstodola)
- Update translations from Weblate
* Tue Feb 07 2023 Packit <hello@packit.dev> - 38.21-1
- Sort RPM versions via rpm.labelCompare() and not via
packaging.version.LegacyVersion() (miro)
- Update translations from Weblate
* Tue Feb 07 2023 Packit <hello@packit.dev> - 38.20-1
- Add Sericea - ostree based Sway variant (jkonecny)
- Fix the systemd generator for systemd 253 (#2165433) (awilliam)
- WebUI: Updated wizard footer buttons (ozobal)
- Remove the dmraid and nodmraid boot options (vtrefny)
- Update translations from Weblate
* Tue Jan 31 2023 Packit <hello@packit.dev> - 38.19-1
- Remove mocking of modules for sphinx docs builds (vslavik)
- docs: Update branching instructions (vslavik)
- docs: Fix release badge URL (vslavik)
- Remove leftovers after the isys module removal (vslavik)
- Templatize kickstart version (vslavik)
- Ignore jinja templates in RPM tests (vslavik)
- Show only usable devices in custom partitioning (jstodola)
- Add base for integration testing and default installation test (zveleba)
- Add storage helper function for listing disks (zveleba)
- Add helper for back button to WebUI tests (zveleba)
- Fix missing tests in release archive (marmarek)
- Update translations from Weblate
* Tue Jan 24 2023 Packit <hello@packit.dev> - 38.18-1
- Extend the DBus API of the DNF module (vponcova)
- webui: Disable check for unexpected SELinux denials (martin)
- Clean up the DNF module (vponcova)
- Update translations from Weblate
* Thu Jan 19 2023 Packit <hello@packit.dev> - 38.17-1
- Remove the is_complete method of the DNF payload class (vponcova)
- Use another type to make new GCC warnings go away (vslavik)
- Remove outdated GCC error suppression (vslavik)
- Ignore non-quoted array expansion in ShellCheck (vslavik)
- Handle the `repo` kickstart command in the DNF module (vponcova)
- Extend the is_network_required method of the DNF module (vponcova)
- Add the Repositories DBus property to the DNF module (vponcova)
- Fix the check_kickstart_interface testing function (vponcova)
- Always use blivet.arch.is_s390() to detect s390 (vslavik)
- Update translations from Weblate
* Wed Jan 18 2023 Fedora Release Engineering <releng@fedoraproject.org> - 38.15-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
* Tue Jan 10 2023 Packit <hello@packit.dev> - 38.15-1
- webui: update obsolete comment (rvykydal)
- webui: pin down tag for fetching cockpit's test library (kkoukiou)
- bootloader/zipl.py: update for zipl >= 2.25.0 (dan)
- docs: Track also automated releases (vslavik)
- shellcheck: Double quote to prevent globbing and word splitting (vponcova)
- Remove the StorageChecker.remove_check method (vponcova)
- Remove the CONNECTION_ACTIVATION_TIMEOUT constant (vponcova)
- Remove the DEFAULT_DBUS_TIMEOUT constant (vponcova)
- GUI: Update the glade file for the Installation Source screen (vponcova)
- Update translations from Weblate
* Thu Dec 22 2022 Packit <hello@packit.dev> - 38.14-1
- Fix typo in the docs (jkonecny)
- docs: corrections and additions to the history (msw)
- Ignore SIGINT in D-Bus launcher and x11 too (iasunsea)
- update translations
* Thu Dec 22 2022 Packit <hello@packit.dev> - 38.13-1
- infra: Don't run scheduled events on forks (vslavik)
- infra: Notify about tagged releases in gChat (vslavik)
- infra: bump pylint from 2.15.6 to 2.15.8 in /dockerfile (49699333+dependabot[bot])
- update translations
* Tue Dec 06 2022 Packit <hello@packit.dev> - 38.12-1
- Web UI: Tests should ignore the volatile space requirement message (skobyda)
- webui: Upgrade to react 18 and enable the new concurrent renderer (kkoukiou)
- Add a block of history about the name of the installer (dcantrell)
* Tue Dec 06 2022 Packit <hello@packit.dev> - 38.11-1
- Fix the installation message about the payload installation (vponcova)
* Mon Nov 28 2022 Packit <hello@packit.dev> - 38.10-1
- infra: Fix the condition for bumping a release version (vponcova)
- infra: Fetch all tags before tagging the release (vponcova)
- Web UI: Add a payload to ks.cfg (ozobal)
- infra: Set up the access token during the code checkout (vponcova)
- infra: Don't release periodically on forks (vponcova)
- Make text in custom_storage_helper more accurate (ozobal)
- test: Update pixel references to current Fedora (martin)
- Fix infobar colors in GTK GUI (ozobal)
* Wed Nov 16 2022 Packit <hello@packit.dev> - 38.9-1
- Progress step improvements (mkolman)
- makebumpver: Ignore all infra, not just bumps (vslavik)
* Tue Nov 08 2022 Packit <hello@packit.dev> - 38.8-1
- Web UI: Update language selection screen (ozobal)
- There are no installation targets if bootloader devices are not set (#2131183) (vponcova)
- makebumpver: import bugzilla only if used (vslavik)
- Remove the period at the end of the button caption (bramgn)
- sync_run_task: Poll proxy state faster (vslavik)
- Use more dasbus-ish interface (vslavik)
- Web UI: Redesign language selection screen (ozobal)
- Add GetCommonLocales to API (ozobal)
- network: fix add_connection_sync doc string (rvykydal)
- webui: update pixel tests for "Detect disks" updates (rvykydal)
- webui: Use 'Detect Disks' instead of 'Discover Disks' (rvykydal)
- webui: do not hide checkbox when showing skeleton while rescanning disks (rvykydal)
- Add release notes for Fedora 37 (vponcova)
- driver_updates: migrate driver_updates.py to pep8 format (jkonecny)
- driver_updates: adding tests for the new logging solution (jkonecny)
- driver_updates: add lot of debug logs for easier debugging (jkonecny)
- driver_updates: extend where we print log messages (jkonecny)
- Change screensaver handling to dasbus, drop safe_dbus (vslavik)
- webui: improve formatting of a promise (rvykydal)
- webui: show alert when there are no discovered disks (rvykydal)
- webui: disable bulk selection during disks discovery (rvykydal)
- webui: add tooltip to disks discovery button (rvykydal)
- webui: replace discovery button spinner with skeleton (rvykydal)
- rpm-ostree: set untrusted ostree pull flag (champetier.etienne)
* Mon Oct 17 2022 Packit <hello@packit.dev> - 38.7-1
- Call date by full path and list it as a dependency (vslavik)
- Remove the isys module and directory (vslavik)
- Move set_system_date_time to pyanaconda.timezone (vslavik)
- Call date instead of settimeofday (vslavik)
- Clean up time-setting (vslavik)
- network: document edge case of resolv.conf missing for %post scripts (#2101527) (rvykydal)
- Revert "webui: start using custom webui-desktop script instead of cockpit-desktop" (rvykydal)
- infra: bump pylint from 2.15.3 to 2.15.4 in /dockerfile (49699333+dependabot[bot])
- infra: bump astroid from 2.12.10 to 2.12.11 in /dockerfile (49699333+dependabot[bot])
- network: use separate main conext for NM client in threads (rvykydal)
- Clean up configure and #include (vslavik)
- Remove our custom mock auditd binary (vslavik)
- Turn off audit without our custom binary (vslavik)
* Mon Oct 10 2022 Packit <hello@packit.dev> - 38.6-1
- Remove bogus dependency on python3-dbus (vslavik)
- Fix a few typos in release document (rvykydal)
- Make driver disk code run only on boot.iso (vslavik)
- Call the Blivet.copy method (vponcova)
- Web UI: Make context help reusable (ozobal)
- Fix Web UI VM startup on F37 (mkolman)
- Don't duplicate dependency on hfsplus-tools (vslavik)
- Move createrepo_c to anaconda-img-deps (vslavik)
- Use faulthandler instead of isys signal handlers (vslavik)
- Fix duplicate alt-D accelerator on root account screen (jeremy.linton)
- Add minimal_memory_needed to hw module (vslavik)
- Use more specific imports in startup_utils (vslavik)
- Use total_memory() from blivet.util instead of ours (vslavik)
- Move storage constraints setting to a helper (vslavik)
- Add tests for is_smt_enabled (vslavik)
- Move some functions from util to hw (vslavik)
- Move memory-related things from isys to new module (vslavik)
- infra: bump pylint from 2.15.2 to 2.15.3 in /dockerfile (49699333+dependabot[bot])
- infra: bump @patternfly/patternfly from 4.210.2 to 4.215.1 in /ui/webui (49699333+dependabot[bot])
- Use existing locale in welcome spoke (vslavik)
- Apply geolocation in main process (vslavik)
- infra: bump astroid from 2.12.9 to 2.12.10 in /dockerfile (49699333+dependabot[bot])
- infra: bump @patternfly/react-core from 4.224.1 to 4.239.0 in /ui/webui (49699333+dependabot[bot])
- Add back waiting for geolocation (vslavik)
- Add wait_for_task() to wait for a Task with timeout (vslavik)
- dracut: handle compressed kernel modules (m.novosyolov)
* Mon Sep 19 2022 Packit <hello@packit.dev> - 38.5-1
- Do not require the anaconda-webui package (mkolman)
- Document how to fix NPM cache issues in Cockpit CI (mkolman)
- Use correct hint for VNC password boot option (jstodola)
- infra: Use the Bugzilla API key in the `makebumpver` script (vponcova)
- Drop the devel branch from the docs (mkolman)
- gui: fix summary hub layout for Japanese translations (rvykydal)
- Improve Register button click feedback (mkolman)
* Tue Sep 06 2022 Packit <hello@packit.dev> - 38.4-1
- Run yelp under liveuser if possible (vslavik)
- infra: bump astroid from 2.12.5 to 2.12.6 in /dockerfile (49699333+dependabot[bot])
- Disable the Unregister button during unregistration (mkolman)
- Update outdated system purpose related strings (mkolman)
- Always set system purpose from GUI (mkolman)
- Report registration errors from kickstart (mkolman)
- Do not pass rd.znet on to installed system unconditionally (jstodola)
- Ignore dependabot commits in changelog (vslavik)
- infra: bump @patternfly/patternfly from 4.206.3 to 4.210.2 in /ui/webui (49699333+dependabot[bot])
- Web UI: Increase visibility of warning messages (ozobal)
- Drop packit override for webui package build (mkolman)
- Create the LVM devices file, if supported (vslavik)
- Remove unused import that snuck in somehow (vslavik)
- Bump SshKeyData version (vslavik)
- Bump pykickstart version for F38_AutoPart (vslavik)
- Document the automated Anaconda package release process (mkolman)
- Web UI: for disks selection show empty label rather than '0 selected' (rvykydal)
- Web UI: use toolbox in disk selection (rvykydal)
- Web UI: Show the help drawer next to content (ozobal)
- Silence pylint warnings in webui code (vslavik)
- Remove execInSysroot (vslavik)
* Tue Aug 30 2022 Packit <hello@packit.dev> - 38.3-1
- Add --hibernation option for Kickstart autopart (ozobal)
- Docs: How to run non-unit tests in CI standalone (#docs) (vslavik)
- Define more macros for cppcheck (vslavik)
- Infra templating script improvements (vslavik)
- infra: bump @patternfly/patternfly from 4.202.1 to 4.206.3 in /ui/webui (49699333+dependabot[bot])
- webui: clean up prepare-updates-img (allison.karlitskaya)
- Adjust dependencies of the anaconda-webui package (mkolman)
- test: Update to cockpit 275 (allison.karlitskaya)
- Add test for dracut_eject (vslavik)
- Add test for ipmi_abort (vslavik)
- Add test for ipmi_report (vslavik)
- Simplify test_detect_virtualized_platform (vslavik)
- Rewrite test_vt_activate to use patch (vslavik)
- webui: build RPMs inside the fedora-37 image (allison.karlitskaya)
- Web UI: update target name in test documentation (rvykydal)
- Verify a biosboot partition on all installation targets (vponcova)
- Define the install_targets property for all bootloader classes (vponcova)
- Test the InstallerStorage.copy method (vponcova)
- Show multiple bootloader devices on the Manual Partitioning screen (vponcova)
- Implement the Root.copy method (vponcova)
- Redefine the Blivet.roots attribute (vponcova)
- Redefine the Blivet.copy method (vponcova)
- Add infrastructure templating tools (ozobal)
* Fri Aug 19 2022 Packit <hello@packit.dev> - 38.2-1
- Fix building for RHEL/ELN without live installer (sgallagh)
- Remove the SimpleConfigFile class (vponcova)
- Don't use the SimpleConfigFile class (vponcova)
- Add a function for splitting values into two strings (vponcova)
- Move DNF code from the payload manager to the DNF payload (vponcova)
- Remove the restart_thread method of the payload manager (vponcova)
- Simplify the implementation of the payload manager (vponcova)
- Remove error messages from the payload manager (vponcova)
- Keep the "Setting up installation source..." message in a new constant (vponcova)
- Remove the WAITING_NETWORK state of the payload manager (vponcova)
- Remove the VERIFYING_AVAILABILITY state of the payload manager (vponcova)
* Mon Aug 15 2022 Packit <hello@packit.dev> - 38.1-1
- Remove release builds from CI status page (#docs) (vslavik)
- Update the tests for the SELinux configuration (vponcova)
- Add release notes for RPMOSTree /sysroot mount as 'ro' (jkonecny)
- Documented required space always including swap (ozobal)
- Remove the DeprecatedSection class (vponcova)
- Remove the sensitive info logger (vponcova)
- Remove the _repos_lock property of the DNF payload class (vponcova)
- Remove the function get_locale_timezones (vponcova)
- Remove the THREAD_GEOLOCATION_REFRESH constant (vponcova)
- Add release notes for f37 vslavik PRs (#docs) (vslavik)
- Do not provide the anaconda-live subpackage on RHEL (vslavik)
- Add release note for no more copying /etc/resolv.conf (rvykydal)
- Add release note for rootpw --allow-ssh option (rvykydal)
- Fix growing installation size requirement (ozobal)
- Add a release note for the `inst.disklabel` boot option (vponcova)
- Add unit tests for the initialization of the default disk label type (vponcova)
- Prefer GPT instead of legacy MBR (vponcova)
- Support the `inst.disklabel` boot option (vponcova)
- Skip Kickstart version tests on RHEL (ozobal)
- Add unit tests for errors raised by the `ZFCPDiscoverTask` task (vponcova)
- rpm-ostree: Setup readonly sysroot for ostree & rw karg (#2086489) (tim)
- Document the Dependabot status (vponcova)
- Initialize empty disks on the Manual Partitioning screen (vponcova)
- Revert "Temporarily ignore the new version of the zfcp command" (jstodola)
- Revert "Ignore also ZFCPData temporarily" (jstodola)
- Allow to omit WWPN and LUN for NPIV-enabled zFCP devices (jstodola)
- Reduce the width of the zFCP dialog (jstodola)
* Tue Aug 02 2022 Packit <hello@packit.dev> - 37.12-1
- Web UI: Replace a newly translated string in tests (vponcova)
- Communicate media verification result clearly (vslavik)
- Fix: check that the password contains the username (songmingliang)
- Fixed required space check always including swap (ozobal)
- Hide the keyboard layout indicator in the passphrase dialog (#2070823) (vponcova)
- Call the check_duplicate_repo_names function (vponcova)
- Call the validate_repo_name function (vponcova)
- Call the get_unique_repo_name function (vponcova)
- Simplify the condition for the `disk_space` parameter in `suggest_swap_size` (vponcova)
- Remove the `quiet` parameter of the `suggest_swap_size` function (vponcova)
- Test the `suggest_swap_size` function (vponcova)
- Web UI: Don't wait for animations in the pixel tests (vponcova)
- Web UI: Show a context help about storage options (vponcova)
- Silence pylint warnings about crypt module (vslavik)
- Ignore no-member pylint detections on gi.repository (vslavik)
- Revert "Disable Pylint" (vslavik)
- bootloader/base.py: enable resume on arm64 (mihai.carabas)
- Disable kexec on RISC-V (imbearchild)
- simplify TestValues enum creation and usage (ethan)
- Disable Pylint (vslavik)
- Fix unit tests for python 3.11 (vslavik)
- Change the Python version to 3.11 in the makeupdates script (rvykydal)
- bootloader: do not consider non-ibft iscsi disk as usable for bootloader (rvykydal)
- Revert "Temporarily keep setter methods for Initial Setup" (vponcova)
- Revert "Temporarily keep setter methods for the Kdump add-on" (vponcova)
- Change default swap size for large-memory systems (pablomh)
* Wed Jul 20 2022 Fedora Release Engineering <releng@fedoraproject.org> - 37.11-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
* Mon Jun 27 2022 Packit <hello@packit.dev> - 37.11-1
- anaconda-modprobe: don't try and load cramfs (awilliam)
- module-setup.sh: Don't ignore errors, unbound variable and pipe fails (miro)
- Don't attempt to add frozen python modules to initramfs (miro)
- Fix kickstart command order in new version (vslavik)
- Ignore also ZFCPData temporarily (vslavik)
- Temporarily ignore the new version of the zfcp command (vponcova)
- Web UI: Fix betanag popover position (mkolman)
- Web UI: Make it possible to close the disks alert (mkolman)
- tests: update the order of commands (rootpw) in generated kickstart (rvykydal)
- webui: Disable "Next" button if no disks are selected (mkolman)
- dnf: apply the /etc/dnf/dnf.conf configuration file in the installer (rvykydal)
- kstests on pr: run in separate anaconda directory (rvykydal)
- Web UI: Show the "Checking disks" spinner for at least two seconds (vponcova)
- Web UI: Show the "Checking disks" spinner (vponcova)
- kstest on pr: use Permian GitHub ReportSender to show results (rvykydal)
- Web UI: Vertically grow the wizard page (vponcova)
- Web UI: Hide the footer if the wizard page is in progress (vponcova)
- Web UI: Add the sleep function (vponcova)
- Web UI: Remove the getSteps function (vponcova)
- Web UI: Remove the wrapWithContext function (vponcova)
- Add Circle Linux profile to Anaconda (bella)
- Web UI: Don't try to replicate installation flags (vponcova)
- Web UI: Remove an unused context from the wizard (vponcova)
- Update pixel test reference image. (mkolman)
- fix type (48353898+copperii)
- Display keyboard accelerator properly (jstodola)
- Revert "Temporarily keep setter methods for the OSCAP add-on" (vponcova)
- Remove missing kickstart command for root ssh password login from common issues (rvykydal)
- GUI: Show the dialog for a missing passphrase in an enlight box (vponcova)
- GUI: Ask for a missing passphrase during automated installations (vponcova)
- Create functions for a missing passphrase in pyanaconda.ui.lib (vponcova)
- Add support for rootpw --allow-ssh (rvykydal)
- Enable bootloader hiding on RHEL (rharwood)
* Tue Jun 21 2022 Adam Williamson <awilliam@redhat.com> - 37.10-3
- Backport PR #4207 to fix initramfs generation for Python 3.11
* Mon Jun 13 2022 Python Maint <python-maint@redhat.com> - 37.10-2
- Rebuilt for Python 3.11
* Mon Jun 06 2022 Packit <hello@packit.dev> - 37.10-1
- Web UI: Don't use a top-level text content (vponcova)
- Update common bugs for F35 resolv.conf issue (rvykydal)
- Check if run as root earlier (#1935470) (luke)
- kstests on PR: adapt to tclib renamig to tplib (rvykydal)
- Add 'eln-baseos' to the DEFAULT_REPOS (sgallagh)
- Web UI: Jump only to the previous wizard steps (vponcova)
- Always tear down devices after finding existing installations (vponcova)
- Update reference images (vslavik)
- Change kstest workflow badge and link for Permian (#docs) (vslavik)
- Fix tests README.rst how to run one unit test (jkonecny)
- kstests on PR: Use stable permian branch (rvykydal)
- Don't fall back to default timezone in welcome spoke (vslavik)
- Use directly URLs in conf geoloc provider field (vslavik)
- Remove unmodularized geolocation (vslavik)
- Use modularized geolocation instead of unmodularized (vslavik)
- Hide the geolocation task in Timezone's interface (vslavik)
- Add GeolocationTask to the Timezone module (vslavik)
- Add a D-Bus structure for geolocation data (vslavik)
- Add conf option for geolocation provider (vslavik)
- Run FixZIPLBootloader task after FIPS setup (rvykydal)
- webui: Make app/page span the whole viewport (vslavik)
- Web UI: Automatically change the popover position (vponcova)
- webui: Add inline alert to the Storage screen (mkolman)
- Web UI: Always allow to sort disks by their name (vponcova)
- Web UI: Improve the table for local standard disks (vponcova)
- Add missing period when concatenating password error strings (#2075419) (jkonecny)
- Prepare release notes for Fedora 36 (vponcova)
- Add tooltip to the Insights checkbox (#2069178) (jkonecny)
- Enable bootloader hiding on RHEL (rharwood)
* Tue May 24 2022 Packit <hello@packit.dev> - 37.9-1
- Use the IsRootAccountLocked property (vponcova)
- Web UI: Fix strings (vponcova)
* Mon May 23 2022 Packit <hello@packit.dev> - 37.8-1
- Web UI: Add the Language label on the Welcome page (vponcova)
- Specify that we want the Adwaita icon theme (awilliam)
- Web UI: Fix the style of paragraphs (vponcova)
- Web UI: Fix header styles in the Review screen (vponcova)
- Web UI: Inform users about the required space and the partitioning method (vponcova)
- Round the required device size up (vponcova)
- tests: Use MD instead of LVM to test available RAID levels (vtrefny)
- webui: Show installation status text on progress screen (mkolman)
- build(deps): bump @patternfly/patternfly in /ui/webui (49699333+dependabot[bot])
- webui: Wait longer for installation to fail (mkolman)
- webui: Add a Quit confirmation dialog (mkolman)
- build(deps): bump @patternfly/react-core in /ui/webui (49699333+dependabot[bot])
- Don't use Cockpit style overrides (vponcova)
- Web UI: Reset the bootloader drive before we schedule partitions (vponcova)
- webui: tests: Streamline working with dbus language setting (zveleba)
- Make check for geolocation start a standalone helper (vslavik)
- Split Timezone module tests for tasks to new file (vslavik)
- Move the default source type on DBus (vponcova)
- Temporarily keep setter methods for Initial Setup (vponcova)
- Temporarily keep setter methods for the OSCAP add-on (vponcova)
- Temporarily keep setter methods for the Kdump add-on (vponcova)
- Use DBus read-write properties (vponcova)
- Simplify the implementation for the DBus interface for Users module (vponcova)
- Install rdma-core if infiniband network device is found (rvykydal)
* Thu May 19 2022 Adam Williamson <awilliam@redhat.com> - 37.7-2
- Backport PR #4125 to fix icon theme problems on KDE
* Mon May 09 2022 Packit <hello@packit.dev> - 37.7-1
- Remove the is_repo_enabled method (vponcova)
- Fix too long lines in the Network spoke (vponcova)
- Rename the checkmount argument (vponcova)
- Rename the onlyOnChange argument (vponcova)
- Run an installation task to close the DNF base (vponcova)
- Close the DNF base during the reset (vponcova)
- Move isIsoImage to the Payloads module (vponcova)
- Move find_first_iso_image to the Payloads module (vponcova)
- Move helper functions for HDISO sources to pyanaconda.ui.lib (vponcova)
- Keep Timezone proxy in Welcome spoke (vslavik)
- Split starting locales in welcome spoke to a helper (vslavik)
- Rename constant to reflect its usage (vslavik)
- makeupdates: Don't be silent about copying anaconda.py (vslavik)
- Remove the get_mount_points function (vponcova)
- Remove PayloadError (vponcova)
- Remove PayloadInstallError (vponcova)
- Remove PayloadSetupError (vponcova)
- (build-deps): Update misc. npm packages (vslavik)
- (build-deps): Update chrome-remote-interface npm package (vslavik)
- (build-deps): Update sass npm packages (vslavik)
- (build-deps): Update patternfly npm packages (vslavik)
- (build-deps): Update eslint npm packages (vslavik)
- (build-deps): Update webpack and plugin npm packages (vslavik)
- (deps-dev): Update babel npm packages (vslavik)
- Add the UpdatesEnabled DBus property (vponcova)
- webui: tests: Add cleanup to TestLanguage to make it non-destructive (zveleba)
- webui: tests: Change handling of steps and hide selectors in methods (zveleba)
- Remove the _configure method (vponcova)
- webui: Document how to fix failing pixel tests (mkolman)
- build(deps): bump @patternfly/react-core in /ui/webui (49699333+dependabot[bot])
- Remove the unused _set_repo_enabled method (vponcova)
- build(deps): bump @patternfly/patternfly in /ui/webui (49699333+dependabot[bot])
- Don't continue if there is no valid base source to use (vponcova)
- Clean up the code that includes additional repositories (vponcova)
- Split the code for the installation source spoke (vponcova)
- Remove ancient file (vslavik)
- Convert additional space checkbox to use child label (vslavik)
- Indent everything on root spoke by 4px (vslavik)
- Set correct focused widget for root spoke (vslavik)
- Add eslint as an unit test for webui (vslavik)
- Run eslint only in dev builds or when requested (vslavik)
- Run restorecon in chroot when handling home dirs (vslavik)
- Move restorecon calls in Tasks to a helper function (vslavik)
- Add Virtuozzo Linux profile to Anaconda, Resolves: rhbz#2067195 (dsilakov)
- webui: Don't check SSH key in command from VM script (vslavik)
* Mon Apr 25 2022 Packit <hello@packit.dev> - 37.6-1
- Map Anaconda exceptions to org.fedoraproject.Anaconda.Error (vponcova)
- Use our error mapper only for the Anaconda message bus (vponcova)
- Clean up the code that adds a base repository (vponcova)
- Remove dependency on eslint-plugin-standard (vslavik)
- webui - Fix pixel test failure due to string being translated (mkolman)
- Call join_paths to create an absolute path (vponcova)
- Document why the DNF transaction runs in a sub-process (vponcova)
- Correct message when ignoring hibernation flag (jblz)
- Clean up the code that reloads the treeinfo metadata (vponcova)
- Don't add treeinfo repositories to DNF twice (vponcova)
- Clean up the code for removal of treeinfo repositories (vponcova)
- Clean up the code that generates treeinfo repositories (vponcova)
- Distinguish URLs from paths in the treeinfo support (vponcova)
- Improve logic of the keyboard spoke completed method (jkonecny)
- webui: tests: Add function for checking pre-release information (zveleba)
- build(deps): bump @patternfly/patternfly in /ui/webui (49699333+dependabot[bot])
- webui: tests: Make it easier to reset partitioning (zveleba)
- webui: tests: increase abstraction of changing pages in the wizard (zveleba)
- build(deps): bump @patternfly/react-core in /ui/webui (49699333+dependabot[bot])
- webui: Update READMEs (mmarusak)
- Don't unnecessarily use cat and use grep -E (oguz)
* Tue Apr 12 2022 Packit <hello@packit.dev> - 37.5-1
- Fix keyboard spoke issue if Live system changed keyboard layouts (#2072941) (jkonecny)
- webui: tests: update reference image for the languate test (kkoukiou)
- webui: fix typo in progress page (oguz)
- webui: Update pixel test reference (mkolman)
- webui: use className for customizing CSS not an ID (kkoukiou)
- webui: be more specific in the custom CSS selectors for the progress stepper (kkoukiou)
- webui: remove unused custom CSS for the progress bar component (kkoukiou)
- webui: show all installation logs in a LogViewer component (kkoukiou)
- webui: Use ProgressStepper on the installation progress screen (mkolman)
- webui: update welcome page title text (kkoukiou)
- webui: improve documentation and add makefile target for updating reference images (kkoukiou)
- webui: tests: make sure TestReview cleans up its changes (kkoukiou)
- webui: tests: extend storage test to validate the disk table rows content (kkoukiou)
- webui: tests: add a test for backend language being initially not english (kkoukiou)
- webui: add a basic check that the webui strings get translated (kkoukiou)
- webui: fix case where the default language is not english (kkoukiou)
- webui: set modules locale for translating messages from the backend (kkoukiou)
- webui: Also filter languages by English names (mmarusak)
- Don't set LC_ALL for live installations (vponcova)
- Don't set the global domain to `anaconda` (vponcova)
- webui: Support other rsync targets (martin)
- webui: tests: Wait for UI initialization in Installer.open() (martin)
- webui: tests: Simplify check-basic (martin)
- webui: fix typo in the review configuration disk table (kkoukiou)
- webui: tests: ignore the labels (PF4 Labels) when pixel testing (kkoukiou)
- webui: tests: introduce some pixel tests (kkoukiou)
- Don't log the output of journalctl -b (vponcova)
- webui: tests: add missing machine_class to the check-language (kkoukiou)
- webui: tests: use the prefixes of the ids from variables (kkoukiou)
- webui: tests: ignore test/images symlink needed for the tests (kkoukiou)
- webui: standardize the naming of the ids and classNames (kkoukiou)
- webui: bring some order to the react components folder (kkoukiou)
- Fix unit tests of the treeinfo support (vponcova)
- Rename the `path` property of the TreeInfoRepoMetadata class (vponcova)
- Log info about loaded .treeinfo files (vponcova)
- Use the origin to handle system repositories (vponcova)
- Add the `origin` attribute to the repo configuration data (vponcova)
- webui: setup pixel tests submodule (kkoukiou)
- webui: tests: add teardown cleanup resetting the language to english (kkoukiou)
- webui: tests: standardize test file names by removing -installation- substring (kkoukiou)
- webui: port review screen confirmation from checkbox to modal dialog (kkoukiou)
- Bump Cockpit version of testlib to 266 (vslavik)
- webui: default language should be fetched from anaconda backend (kkoukiou)
- webui: add support for disabling Next button if form is invalid (kkoukiou)
- webui: pass translated string for 'No results found' text (kkoukiou)
- webui: move language setting of cookies and backend (kkoukiou)
- webui: menuAppendTo can be a property of Select component from Patternfly (kkoukiou)
- webui: remove undefined property from InstallationLanguage component (kkoukiou)
- webui: create helpers for language conversion from and to cockpit lang cookie (kkoukiou)
- webui: set language also in backend when selecting a new language (kkoukiou)
- webui: tests: use id instead of contains: for the Quit button test selector (kkoukiou)
- webui: tests: add a test for the Quit button (kkoukiou)
- webui: if the file is empty don't try to parse it (kkoukiou)
- webui: adjust error message to make it unique and matching the actual problem (kkoukiou)
- webui: remove unused parameter from conf.js helper function (kkoukiou)
- webui: parsing the files for the initialization can be done in parallel (kkoukiou)
- webui: fix 'Reboot' and 'Quit' button callbacks (kkoukiou)
- webui: Make it possible to go back to language selection screen (mkolman)
- webui: Add Review screen implementation (mkolman)
- webui: add support for re-scanning disks (kkoukiou)
- webui: Add API for selected disks access (mkolman)
- webui: Add API for target system language access (mkolman)
- webui: add title and icon to the empty-state component in the installation progress (kkoukiou)
- webui: tests: create some helper test classes (kkoukiou)
- Mark error message for missing usable disks for partitioning as translatable (kkoukiou)
- Don't re-enable repositories (vponcova)
- Use the disabled_repositories configuration option (vponcova)
- Add the get_matching_repositories method (vponcova)
- Manage the system repositories with DNF manager (vponcova)
- Remove the _reset_configuration method of the DNF payload class (vponcova)
- webui: show empty state loading variant if the API is still fetching data (kkoukiou)
- webui: storage: if more than 10 disks are present change the table to compact (kkoukiou)
- webui: storage: only show sortable columns if more than one disks exist (kkoukiou)
- webui: allow passing different label for the wizard nav item and the step title (kkoukiou)
- webui: rephrase the welcome screen label for the language selector (kkoukiou)
- Add Release Notes for keyboard configuration split on Live (#2016613) (jkonecny)
- Enable fingerprint authentication using enable-feature (#2069899) (vponcova)
- webui: Close installer to quit/reboot/finish (vslavik)
- webui: Increase size of VM disk for interactive work (vslavik)
- webui: Don't use inst.nokill for testing VMs (vslavik)
- webui: Save webui wrapper script PID (vslavik)
- Fix the documentation of the languages attribute in packages configuration (vponcova)
- webui: expose webui.remote boot option (kkoukiou)
- Clean up pyanaconda.payload.utils (vponcova)
- Clean up the RepoData class (vponcova)
- Use a task to set up an additional HDD repository (vponcova)
- Add the parse_hdd_url function (vponcova)
- Improve the recommendation from the swap verification check (vponcova)
- Improve the error message from the OPAL compatibility check (vponcova)
- webui: Test both betanag states (vslavik)
* Mon Mar 28 2022 Packit Service <user-cont-team+packit-service@redhat.com> - 37.4-1
- Remove the unused _noop method (vponcova)
- Fix failing pylint check. (rvykydal)
- Use a task to set up an additional NFS repository (vponcova)
- Parse both formats of the NFS repositories (vponcova)
- webui: start using custom webui-desktop script instead of cockpit-desktop (kkoukiou)
- ShellCheck: Quote also variables inside ${...} (vslavik)
- Move the validation of system repositories (vponcova)
- Always load new enabled repositories to check their validity (vponcova)
- Don't allow to load metadata of a disabled repository (vponcova)
- Remove the _add_repo_to_dnf_and_ks method of the DNF payload class (vponcova)
- Use the DNF manager to load all enabled repositories (vponcova)
- Add the load_packages_metadata method to the DNF manager (vponcova)
- Extend the DBus documentation of the Storage module (vponcova)
- webui: add helper text in the installation destination step (kkoukiou)
- webui: adapt the wizard body headers and other captions to the design mockups (kkoukiou)
- webui: move installation destination step to ListingTable component (kkoukiou)
- Clarify which Anaconda profile is used by CentOS Stream (vponcova)
- webui: prefer constant variable when possible (kkoukiou)
- webui: bring some order to the imports (kkoukiou)
- webui: move wizard code out of app.jsx to a new file (kkoukiou)
- webui: stop using titleId without a title (kkoukiou)
- webui: keep a list of visited pages for deciding which nav items are enabled (kkoukiou)
- webui: stop passing 'address' variable to the Footer component (kkoukiou)
- webui: tests: do not start the installation in non-destructive tests (kkoukiou)
- webui: convert wizard to in-page and add a betanag label (kkoukiou)
- Add the generate_driver_disk_repositories function (vponcova)
- Split some code from the update_base_repo method (vponcova)
- Handle the inst.addrepo option in the DNF payload class (vponcova)
- Remove the additional_repos attribute of the Anaconda class (vponcova)
- Parse the inst.addrepo option using argparser (vponcova)
- gui: update network spoke for symbolic icons (#2055883) (rvykydal)
- gui: update beta-nag dialog for symbolic icons (#2055883) (rvykydal)
- gui: update Quit dialog for symbolic icons (#2055883) (rvykydal)
- Add the --ignore-broken test again (vponcova)
- Remove --ignore-broken test (#test) (jkonecny)
- webui: add support for in form error notifications per step (kkoukiou)
- webui: introduce a custom Footer component for the Wizard (kkoukiou)
- webui: introduce some logic for which steps the users can access (kkoukiou)
- webui: Get method call on the Properties interface always wraps results in arrays (kkoukiou)
- webui: move dbus client declarations to singleton classes (kkoukiou)
- webui: fix progress reporting in the InstallationProgress component (kkoukiou)
- build(deps): bump @patternfly/react-core in /ui/webui (49699333+dependabot[bot])
- Document inst.net.noautodefault option (rvykydal)
- build(deps): bump @patternfly/patternfly in /ui/webui (49699333+dependabot[bot])
- Add scripts for anaconda services to updates image (rvykydal)
- Add inst.net.noautodefault option do disable NM default autocons (#2033231) (rvykydal)
- Disable NM autoconnections in Anaconda (rvykydal)
* Tue Mar 15 2022 Packit Service <user-cont-team+packit-service@redhat.com> - 37.3-1
- Increase version of the anaconda-widgets (jkonecny)
- Disable layout_indicator in Anaconda (jkonecny)
- Don't configure the keyboard in Live environments with XWayland (jkonecny)
- webui: tests: check-installation-progress tests are not non-destructive (kkoukiou)
- tests: webui: ensure that installation reaches boot-loader step and fails (kkoukiou)
- webui: storage configuration: show only usable disks in the table (kkoukiou)
- webui: set default storage configuration in the JS code (kkoukiou)
- webui: move localization apis to 'apis' folder (kkoukiou)
- webui: move installation apis to 'apis' folder (kkoukiou)
- webui: pass up to the component tree a hander for showing errors in the UI (kkoukiou)
- webui: move react components to a new `components` folders (kkoukiou)
- webui: rewrite language selection component to a class component (kkoukiou)
- network: Handle network configuration paths not existing (awilliam)
- webui: webpack: process all assets when compressing (kkoukiou)
- Change pylint ignore from number to name (vslavik)
- Remove RpmDb-related setup in OSTree payloads (vslavik)
- pylint: Survive scanning broken symlinks (vslavik)
- pylint: Don't read whole files to check hashbangs (vslavik)
- pylint: Ignore checkouts of cockpit repos (vslavik)
- pylint: Simplify skipping already detected paths (vslavik)
- webui: move to a wizard based design implementation (mkolman)
- Do not crash on network --device link with wireless device (#2051235) (rvykydal)
- Remove the decorated_window conf option (vslavik)
- packit: build SRPM in Copr (ttomecek)
- Use the latest Read the Docs theme (vponcova)
- Change the example bug related to unlocked LUKS devices (vponcova)
- webui: read conf from installation environment (vslavik)
* Tue Mar 08 2022 Adam Williamson <awilliam@redhat.com> - 37.2-2
- Backport PR#3935 to fix live installs
* Tue Mar 08 2022 Packit Service <user-cont-team+packit-service@redhat.com> - 37.2-1
- Fix Makefile targets using L10N Makefile variables (jkonecny)
- Remove the blivet_gui_supported configuration option (vponcova)
- webui: tests: move journal parsing for waiting for webui initialization to the VM creation script (kkoukiou)
- webui: tests: move cockpit-ws spawning to the machine_install script instead of the ks file (kkoukiou)
- webui: tests: workaround cockpit's expectation for test/images directory (kkoukiou)
- webui: first pass on the installation progress component (kkoukiou)
- webui: tests: add payload workaround for the webui tests (kkoukiou)
- webui: add notification component at top level (kkoukiou)
- Set up basic error handling for the Web UI (vponcova)
- Provide defaults for the Web UI installation (vponcova)
- webui: tests: wait for the webui initialiation to have finishes before running the tests (kkoukiou)
- Always request localization files during build (jkonecny)
- Collect PO files names dynamically (jkonecny)
- Move the po files download to the `make` call (jkonecny)
- webui: tests: actually boot into the webui mode (kkoukiou)
- webui: tests: ignore output when running commands in the ks file (kkoukiou)
- Remove the enable_ignore_broken_packages configuration option (vponcova)
- build(deps): bump @patternfly/patternfly in /ui/webui (49699333+dependabot[bot])
- tests: webui: Increate timeout for accessible webui to 5 minutes (kkoukiou)
- Replace one more icon after removal from adwaita (#2055883) (jkonecny)
- Allow to run an incomplete installation via DBus (vponcova)
- Remove ksdata from migrated payload classes (vponcova)
- Remove progressQ (vponcova)
- Don't use progressQ in GUI (vponcova)
- Don't use progressQ in TUI (vponcova)
- Don't use progressQ in the installation queue (vponcova)
- Update accordion.py (76429226+layne-yang)
- Replace legacy adwaita icons removed in adwaita-icon-theme 42 (awilliam)
- Update the .coveragerc file (vponcova)
- webui: Pin eslint-plugin-react to the last non broken release (kkoukiou)
- build(deps): bump @patternfly/react-core in /ui/webui (49699333+dependabot[bot])
- ovirt: move /var/tmp to its own partition (sbonazzo)
- webui: Don't save SSH key in command from VM script (vslavik)
- docs: add intructions to the on-duty team member for handling failing image refreshes for webui tests (kkoukiou)
- Add a release note for removed undocumented and unused scripts (vponcova)
- Remove the /usr/bin/analog script (vponcova)
- Remove the /usr/bin/restart-anaconda script (vponcova)
- Improve the documentation of the run-anaconda script (vponcova)
- Don't report the name of the DBus task by default (vponcova)
- webui: Use grouped typeahead for the language selector (kkoukiou)
- webui: consume real data in the language selection dialog from the API (kkoukiou)
- Introduce GetLanguages, GetLanguageData, GetLocales, GetLocaleData methods on the Localization interface (kkoukiou)
- Add note to branching guide to look on pykickstart issues (#docs) (jkonecny)
- Fixed the translation not taking effect (yangxiaoxuan)
* Mon Feb 21 2022 Packit Service <user-cont-team+packit-service@redhat.com> - 37.1-1
- webui: checkout last release instead of main for cockpit's test library (kkoukiou)
- Do not modify boot order on UEFI if asked (vslavik)
- webui: use test images from the cockpit's image store (kkoukiou)
- webui: tests: use python3, python is not a thing in Cockpit's test container anymore (kkoukiou)
- Remove RPM database cleanup (vslavik)
- Add all fields to PartSpec's string representation (vslavik)
- Add __repr__ to PartSpec (vslavik)
- UX: clarify meaning of "additional space" checkbox (hexagon-recursion)
- Create /var subvolume on Fedora Kinoite and Silverblue (cmurf)
- Remove misleading warning about inst.ks.device replacing ksdevice (rvykydal)
- Remove the support for detection of unsupported hardware (vponcova)
- Revert "Ignore webui specific parts in the rpm-test" (kkoukiou)
- webui: Add mising MAINTAINERCLEANFILES in Makefile.am (kkoukiou)
- webui: install eslint-config-standard-jsx to align with what starter-kit [1] does (kkoukiou)
- build(deps): bump @patternfly/patternfly in /ui/webui (49699333+dependabot[bot])
- Remove webui kernel boot argument support (jkonecny)
- Ignore deps-dev commits by dependabot (vslavik)
- Remove web UI from spec file on Fedora 36 (jkonecny)
- Remove npm dependencies from the containers (jkonecny)
- Remove webui code from the Fedora 36 (jkonecny)
- build(deps): bump @patternfly/react-core in /ui/webui (49699333+dependabot[bot])
- Restore contexts also in /usr/lib (vslavik)
- ci: rpm: install older rpm version in the container (kkoukiou)
- po: limit threads used by libgomp when building the merged translation files (kkoukiou)
- Reset the password if the root account is disabled (vponcova)
- Fix the status of the root configuration screen (vponcova)
- Fix the condition for entering the root configuration (vponcova)
- Move tests for pyanaconda.ui.lib.users to a new file (vponcova)
- Revert "Show correctly that no admin user is set up" (vponcova)
- Remove the make-sphinx-docs script (vponcova)
- Remove the list-screens script (vponcova)
- Remove the anaconda-read-journal script (vponcova)
- Remove the run_boss_locally.py script (vponcova)
- Improve the indentation in pyanaconda.installation (vponcova)
- Translate strings when we create the installation queue (vponcova)
- Create a task for running the current installation queue (vponcova)
- webui: tests: update README file (kkoukiou)
- webui: tests: add support for destructive tests (kkoukiou)
- Don't use progressQ in tasks of the installation queue (vponcova)
- Do not fail on nonexistent fs nodes in pstore (vslavik)
- dockerfile: stop specifying nodejs stream explicitely (kkoukiou)
- Support Btrfs-only mount points in the default partitioning (vponcova)
- Use a task to write repositories on the target system (vponcova)
- Revert "Adjust configuration options for Fedora 36" (jkonecny)
- dockerfile: ci: rpm: install nodejs instead of NPM directly (kkoukiou)
- Do not copy resolv.conf to target system at the end of installation (rvykydal)
- Do not copy /etc/resolv.conf to chroot before installation (rvykydal)
- Clean up pyanaconda.installation_tasks (vponcova)
- Extend the unit tests for the Flatpak manager (vponcova)
- Don't use progressQ in the payload classes (vponcova)
- Don't use progressQ in the DNF payload class (vponcova)
- Simplify the error message about a failed Flatpak operation (vponcova)
- Don't use progressQ in the Flatpak manager (vponcova)
- spec: Add dependency on libblockdev-lvm-dbus to install-env-deps (vtrefny)
- webui: users: do not try to use the proxy before it's ready (kkoukiou)
- Add documentation of how to fix our CI (jkonecny)
- Move save_hw_clock method to a D-Bus configuration task (kkoukiou)
- Remove the InstallRepoEnabled DBus property (vponcova)
- Add the `installation_enabled` attribute to the repository configuration data (vponcova)
- Document how to enable Cockpit CI for Fedora branches (mkolman)
- Update branching docs (mkolman)
- Reset the password if the root account is disabled (vponcova)
- Fix the status of the root configuration screen (vponcova)
- Fix the condition for entering the root configuration (vponcova)
- Move tests for pyanaconda.ui.lib.users to a new file (vponcova)
- Revert "Show correctly that no admin user is set up" (vponcova)
- Remove the WriteResolvConfTask class (vponcova)
- Clean up the code for including Web UI in an updates image (vponcova)
- Adjust configuration options for Fedora 36 (mkolman)
- build: Remove make as part of run-build-and-arg script (kkoukiou)
- spec: list webui language translation files into the RPM (kkoukiou)
- po: don't translate the externally fetched pkg/lib content for now (kkoukiou)
- webui: po: cockpit-po-plugin expects that translations are from the current directory (kkoukiou)
- po: add hack to workaround semicolon bug (kkoukiou)
- po: stop using --use-fist when creating the anaconda.pot file (kkoukiou)
- po: start translating webui files (jsx) and add support for cockpit translation functions (kkoukiou)
- webui: eslint: let's always prefer double quotes since cockpit localization needs it (kkoukiou)
- webui: start translating some strings (kkoukiou)
- Test a recreation of the same thread (vponcova)
- Add the `enabled` attribute to the repository configuration data (vponcova)
* Wed Jan 26 2022 Packit Service <user-cont-team+packit-service@redhat.com> - 36.16-1
- packit: release: unset use_cockpit by sedding the specfile in packit script (kkoukiou)
- webui: parameterize ports for ssh, cockpit connection and http server (kkoukiou)
- Use systemd-resolved in installer environment. (rvykydal)
- webui: tests: add info on how to run these in a toolbox (#docs) (kkoukiou)
- npm: Lock mini-css-extract-plugin at version 2.4.5 (kkoukiou)
- pyanaconda: fix webui directory in Makefile (kkoukiou)
- webui: Fix test/README tip (kkoukiou)
- webui: makeupdates: file expected path (kkoukiou)
- webui: Fix some pylint errors in the tests code (kkoukiou)
- webui: Reorganize new webui code into different directories (kkoukiou)
- webui: add usage of the timedatectl ServerTime wrapper (kkoukiou)
- webui: introduce new watch and rsync makefile targets (kkoukiou)
- webui: setup subdirectories for the different components (kkoukiou)
- webui: show device selection list for partitioning (kkoukiou)
- webui: sync Makefile with starter kit makefile regarding updating package.json (kkoukiou)
- webui: Introduce template react components for all configuration subpages (kkoukiou)
- test: Bring new cockpit based WebUI tests to the CI (kkoukiou)
- webui: change format of the README files for consistency (kkoukiou)
- webui: Introduce base functionality for automated testing (kkoukiou)
- webui: Add target for fetching cockpit's testing library in anaconda-webui Makefile (kkoukiou)
- Ignore webui specific parts in the rpm-test (jkonecny)
- Ignore npm packages files for translation (jkonecny)
- Add npm and git dependencies to the ci and rpm containers (kkoukiou)
- Build and install webui also through autotools (kkoukiou)
- webui: strip down eslintrc ignore rules to only the rules that really don't make sense (kkoukiou)
- webui: enforce the consistent use of either double or single quotes (kkoukiou)
- webui: add simple example of using the dbus API for reading and writing properties (kkoukiou)
- Make the makeupdates script Web UI aware (kkoukiou)
- Build and include the cockpit tar into the anaconda spec file (kkoukiou)
- Introduce webui plugin base code (kkoukiou)
- Initial Web UI support (mkolman)
- Run chown instead of os.walk-ing to re-own home dir (vslavik)
- Add the set_repository_enabled function (vponcova)
* Wed Jan 19 2022 Fedora Release Engineering <releng@fedoraproject.org> - 36.15-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild
* Mon Jan 17 2022 Packit Service <user-cont-team+packit-service@redhat.com> - 36.15-1
- Correct liveinst SELinux status check (awilliam)
- The OPAL compatibility with XFS features is mandatory (vponcova)
- Improve wording on the admin checkbox (vslavik)
- User is admin by default (vslavik)
* Mon Jan 10 2022 Packit Service <user-cont-team+packit-service@redhat.com> - 36.14-1
- Move the code for adding repositories to the DNF base (vponcova)
- Allow to convert kickstart repositories into DBus data (vponcova)
- Skip /etc/machine-info during live installs (#2036199) (awilliam)
* Thu Jan 06 2022 Packit Service <user-cont-team+packit-service@redhat.com> - 36.13-1
- New version - 36.13 (Martin Kolman)
- Fix names of tests for the OPAL compatibility verification (Vendula Poncova)
- Always use LegacyVersion for parsing versions (Vendula Poncova)
- Remove the GenerateTemporaryKickstart DBus method (Vendula Poncova)
- Use the DBus API for the image and tar installation (Vendula Poncova)
- Run the installation tasks in the live image payload module (Vendula Poncova)
- Create complete installation tasks for live and tar installations (Vendula Poncova)
- Create the tarball source module (Vendula Poncova)
- Merge helper functions into users._reown_homedir() (Vladimir Slavik)
- Remove _get_parent_directory (Vladimir Slavik)
- Merge _dir_tree_map into _chown_dir_tree (Vladimir Slavik)
- Move touch from core.util to core.path (Vladimir Slavik)
- Move join_paths from core.util to core.path (Vladimir Slavik)
- Move open_with_perm from core.util to core.path (Vladimir Slavik)
- Move get_mount_paths from core.util to core.path (Vladimir Slavik)
- Move parent_dir to users._get_parent_directory (Vladimir Slavik)
- Move dir_tree_map and chown_dir_tree to users (Vladimir Slavik)
- Remove last use of dir_tree_map outside core.util (Vladimir Slavik)
- Move util.mkdirChain to path.make_directories (Vladimir Slavik)
- Add missing commas to the test_get_kernel_version_list test (Vendula Poncova)
- Fix syntax errors in a workflow (#infra) (Vendula Poncova)
- Show all logs of failed unit tests (Vendula Poncova)
- Move set_system_root from core.util to core.path (Vladimir Slavik)
- Add a new module for path-related helpers (Vladimir Slavik)
- Fix shellcheck warnings (Vladimir Slavik)
- Update ShellCheck config files (Vladimir Slavik)
- Add ShellCheck to unit tests (Vladimir Slavik)
- Improve headline comment of our containers (#infra) (Jiri Konecny)
- Use local anaconda.spec.in file during container build (#infra) (Jiri Konecny)
- Fix typo in debug print in network part (Jiri Konecny)
- Replace local function with service helper (Vladimir Slavik)
- Change service helper default root to "/" (Vladimir Slavik)
- Fix too shallow clone in release action (#infra) (Vladimír Slávik)
- Test the service helpers (Vladimir Slavik)
- Move service util functions to new module (Vladimir Slavik)
- Remove the base_repo property (Vendula Poncova)
- Remove the support for image installations from the liveinst script (Vendula Poncova)
- Close stale pull requests (#infra) (Vendula Poncova)
* Tue Dec 14 2021 Packit Service <user-cont-team+packit-service@redhat.com> - 36.12-1
- New version - 36.12 (Martin Kolman)
- Retire execInSysroot (Vladimir Slavik)
- Retire all uses of execInSysroot in bootloader (Vladimir Slavik)
- Stop using execInSysroot in FixZIPLBootloaderTask (Vladimir Slavik)
- Remove the root= kwarg of execInSysroot (Vladimir Slavik)
- Replace the only execInSysroot call using root= (Vladimir Slavik)
- Fix ShellCheck issues in translation_canary (Vladimir Slavik)
- network: always use rd.iscsi.ibft when the need to access an iBFT device (Lubomir Rintel)
- Remove the dracut_args attribute (Vendula Poncova)
- Remove upd-kernel (Vladimir Slavik)
- Quote things for ShellCheck (Vladimir Slavik)
- Eliminate boolean test operator (Vladimir Slavik)
- Remove LIVE_INSTALL (Vladimir Slavik)
- Improve grepping and testing results in liveinst (Vladimir Slavik)
- Fix quoting in liveinst scripts (Vladimir Slavik)
- Split variable declaration and assignment (Vladimir Slavik)
- Do not try to load the floppy kernel module (Jan Stodola)
- Fix reset of DBus containers in the unit tests (Vendula Poncova)
- Introduce a download path to simplify the image payload code (Vendula Poncova)
- Add a page with overview of CI actions (Vladimir Slavik)
- Fix generation of commit range for rel.notes (#infra) (Vladimir Slavik)
- Fix mailing list in our Dockerfiles (Jiri Konecny)
- Change mail from anaconda-devel-list@redhat.com to Fedora variant (Jiri Konecny)
- Remove the container build badge from README (Vladimir Slavik)
- Clean up the task for the checksum verification (Vendula Poncova)
- Remove the %anaconda section (Vendula Poncova)
- Deprecate the ANA_INSTALL_PATH environment variable (Vendula Poncova)
* Thu Dec 02 2021 Packit Service <user-cont-team+packit-service@redhat.com> - 36.11-1
- New version - 36.11 (Martin Kolman)
- Handle potential failure of `cd` (Vladimir Slavik)
- Printf variables correctly (Vladimir Slavik)
- Simplify debug printing (Vladimir Slavik)
- Ignore use of local variables (Vladimir Slavik)
- Fix wrong comparison operator (Vladimir Slavik)
- Remove unused variables (Vladimir Slavik)
- Ignore variables used across our dracut hooks (Vladimir Slavik)
- Fix arithmetic operation on a variable (Vladimir Slavik)
- Fix `read` calls in dracut code (Vladimir Slavik)
- Check correctly if glob finds anything (Vladimir Slavik)
- Check for substring in POSIX compatible way (Vladimir Slavik)
- Remove useless echo calls (Vladimir Slavik)
- Split combined local variable creation and assignment (Vladimir Slavik)
- Fix "empty" redirections in dracut scripts (Vladimir Slavik)
- Fix hashbangs in dracut scripts (Vladimir Slavik)
- Split binary logic in dracut shell files (Vladimir Slavik)
- Add a ShellCheck config for dracut scripts (Vladimir Slavik)
- Add changelog to GH releases (#infra) (Vladimir Slavik)
- Enable the pytest assert introspection in the helper functions (Vendula Poncova)
- Fix Source0 in spec to point to upstream source URL (Jiri Konecny)
* Mon Nov 29 2021 Martin Kolman <mkolman@redhat.com> - 36.10-1
- Add tasks for cleaning up after the live image installation (vponcova)
- Create a task for mounting a live image (vponcova)
- Remove unused code from the live image payload module (vponcova)
- Wait for all background threads to finish before filling installation task
queue (mkolman)
- Remove all git hooks (vponcova)
- Add a mnemonic (alt-s) to the LUKS version dropdown (vslavik)
- Use a task to download the image payload (vponcova)
- Clean up the download progress of the image payload (vponcova)
- Fix double quotes in dracut package module-setup (vslavik)
- Use the set up tasks in the image payload class (vponcova)
- Split system purpose tests to a separate file (mkolman)
- Create shared constants file for the subscription module (mkolman)
- Move USER_AGENT to core/constants.py (mkolman)
- Reset the goal during clearing the DNF cache (#2020754) (vponcova)
- Fix generating of the kernel boot argument rd.znet= on s390x (jstodola)
- Do not crash on dangling symlink /etc/resolv.conf (#2019579) (rvykydal)
- Prepare release notes for Fedora 35 (vponcova)
- Fix shell quotes in dracut (vslavik)
* Mon Nov 15 2021 Martin Kolman <mkolman@redhat.com> - 36.9-1
- Remove the BaseLivePayload class (vponcova)
- Cancel planned manual update of system time on turning ntp on (rvykydal)
- Always check the dot before a tar suffix (vponcova)
- Unify the detection of the tar image (vponcova)
- Remove Jenkins from makebumpver (vslavik)
- Add Rocky Linux profile to Anaconda (tucklesepk)
- Add a new separator after the default keyboard layout (vponcova)
- Replace the deprecated syspurpose CLI tool with SetSysrpose DBus call
(mkolman)
- bug fix: activate connection from callback _connection_updated_cb (qiy)
- Remove git hook scripts (vslavik)
- Run rsync with the correct source (vponcova)
- Fix application of network --mtu kickstart option in Anaconda (rvykydal)
- Add Rocky Linux profile to Anaconda (tucklesepk)
- Migrate the Live OS payload on DBus (vponcova)
- Don't require implementation of post_install_with_tasks (vponcova)
- Move test launcher scripts to subdirectories (vslavik)
- Fix all Shellcheck warnings in tests (vslavik)
- Add Shellcheck config for Anaconda (vslavik)
- Remove the provides_web_browser property (vponcova)
* Tue Nov 02 2021 Martin Kolman <mkolman@redhat.com> - 36.8-1
- Make network spoke GUI more robust in cases of missing NM Client. (rvykydal)
- Do not crash on missing NM Client on --vnc installations (#1998754)
(rvykydal)
- Add configuration files for Read the Docs (vponcova)
- Use the set-up and tear-down tasks of the Live OS image source (vponcova)
- make US keyboard layout easier to find in Anaconda (suanand)
- Show correctly that no admin user is set up (vslavik)
- Move the Live OS image detection into a task (vponcova)
- No wildcards in Automake (praiskup)
- Create a new base class for migrated payloads (vponcova)
- Disable the concurrency check in the error dialog in TUI (vponcova)
- Unify GUI & TUI root spoke completeness conditions (vslavik)
- Log statistics about the image installation (vponcova)
- Document the drop-in %post scripts (vslavik)
- Monitor the progress of the image installation in tasks (vponcova)
- Bump required rpm version (vslavik)
- CONTRIBUTING: Note to base changes on a clone of the target branch. (fgrose)
- anaconda-cleanup: Don't unmount '/run/rootfsbase'. (fgrose)
- Change creation of post-script directory (vslavik)
- Restore file contexts in task instead of %post script (vslavik)
- CopyLogsWithTask is now FinishInstallationWithTasks (vslavik)
- Use the recommended autoreconf command (praiskup)
* Tue Oct 12 2021 Martin Kolman <mkolman@redhat.com> - 36.7-1
- Cache the parsed content of the help mapping files (vponcova)
- Use specific help directories (vponcova)
- Remove the default_help_pages configuration option (vponcova)
- Remove the helpFile attribute (vponcova)
- Implement the unified help support (vponcova)
- Mention manual journal dumps for mising logs (vslavik)
- Revert "Install kbd-legacy if keyboard layout is "fi" (#1955793)" (vponcova)
* Mon Oct 11 2021 Martin Kolman <mkolman@redhat.com> - 36.6-1
- Don't assume Python modules are in sysconfig.get_path('purelib') (miro)
- Watch the org.freedesktop.hostname1 name (vponcova)
- Make log copying truly the very last thing done (vslavik)
- Rename string constant to make more sense (vslavik)
- Move screenshot copying into the Task to copy logs (vslavik)
- Add a quick howto for testing dracut changes (vslavik)
- Mark the nompath option as deprecated (vslavik)
- Don't consider the string module as deprecated (vslavik)
- Fix typo and style (vslavik)
- Remove ensure_str and decode_bytes (vslavik)
- Stop using ensure_str in SimpleConfigParser (vslavik)
- Stop using ensure_str in ProxyString (vslavik)
- Uncouple ensure_str from {upper,lower}_ascii (vslavik)
- Stop optionally decoding string data from RPM (vslavik)
- Remove usage of ensure_str from have_word_match (vslavik)
- Rename functions in string module to lower_case (vslavik)
- Improve tests and docs of the new string module (vslavik)
- Split string helpers from pyanaconda.core.util (vslavik)
- Replace dummy callbacks (vponcova)
- Remove the DBusMetaTask class (vponcova)
- Remove unused arguments of the AnacondaPreParser class (vponcova)
- Remove unused arguments of the AnacondaKSParser class (vponcova)
- Remove the successful_checks property (vponcova)
- Remove the sysroot_path function (vponcova)
- Mark an unused variable with an underscore (vponcova)
- Remove the SessionBus object (vponcova)
- Remove the ANACONDA_DATA_DIR constant (vponcova)
- Remove the minLevel argument (vponcova)
- Remove the logLevelMap variable (vponcova)
- Add systemd-machine-id-setup on Live to common bugs (vslavik)
- Remove the mpath flag (vslavik)
- Stop using the mpath flag (vslavik)
* Thu Sep 30 2021 Martin Kolman <mkolman@redhat.com> - 36.5-1
- In installer environment set static, not transient hostname (rvykydal)
- Payload should wait for all storage related threads to finish (mkolman)
- Update Rawhide release docs to state of the art as of Fedora 35 (mkolman)
- Fix deprecation warning about Gdk.Cursor.new (vslavik)
- Document workaround MGA G200e graphics card (mkolman)
- Verify the OPAL compatibility with XFS features (vponcova)
- Fix comments in the python-deps script (vslavik)
- Use sysconfig in dracut directly, not via distutils (vslavik)
* Thu Sep 23 2021 Martin Kolman <mkolman@redhat.com> - 36.4-1
- Do not crash if restorecon is missing on target system (vslavik)
- Move chmod into file copying function in CopyLogsTask (vslavik)
- Clarify that the software selection doesn't affect the Anaconda configuration
(vponcova)
- Set an upper bound to entered sizes (#1992585) (vponcova)
- Revert "Install kbd-legacy if keyboard layout is "fi" (#1955793)" (vponcova)
- Use octal permissions instead of hexadecimal (vslavik)
- Handle new time zones in GUI after earlier switch to zoneinfo (vslavik)
- Do not stretch NTP toggle in GUI (vslavik)
- Add AlmaLinux profile (andrew.lukoshko)
- The NTP server dialog without entries shouldn't crash (#2001591) (vponcova)
- Set hostname also from ip= static configuration without device (#1988521)
(rvykydal)
- Add Silverblue specific logos to profile. (jaberan)
- data/profile.d: Add profiles for KDE & Kinoite Spins (tim)
- Fix Removed options inst.[product|variant] were subsections (jkonecny)
* Thu Sep 16 2021 Martin Kolman <mkolman@redhat.com> - 36.3-1
- Fix boolean comparisons in asserts (vslavik)
- Stop using distutils to compare kernel versions (vslavik)
- Clarify scope of ignored locations (amahdal)
- Clarify reference to other *multiple* `inst.ks` arguments (amahdal)
- Clarify default behavior before `inst.ks.all` (amahdal)
- Clarify `inst.ks.all` description by using imperative mode (amahdal)
- Add missing markup for option names and "value types" (amahdal)
- Copy logs in a task instead of a %post script (vslavik)
* Thu Sep 09 2021 Martin Kolman <mkolman@redhat.com> - 36.2-1
- Add missing apostrophe to suggestion (rffontenelle)
- Add test for new "nosave" config members (vslavik)
- Remove nosave flags, use conf instead (vslavik)
- Add (no)save options to Anaconda section of config (vslavik)
- Define a unique id in the main spokes and hubs (vponcova)
- Add the Screen class (vponcova)
- Print progress dots on one line in TUI (honza.stodola)
- Cleanup unneeded NFS repo with rd.live.ram parameter (mmatsuya)
- Include the anaconda-generator script in the updates image (vponcova)
- Don't run shell on every found virtualization console (vponcova)
* Tue Aug 24 2021 Martin Kolman <mkolman@redhat.com> - 36.1-1
- fsset: Ignore all swap activation errors in turn_on_swap (vtrefny)
- Don't try to use line buffering in binary mode (vponcova)
- Add release notes for NTP dialog change (vslavik)
- Change the NTP server dialog design (vslavik)
- Rename spoke to Root Account (vslavik)
- Don't set default of gpt option at cmdline parsing (cheeselee)
- Change the root password spoke GUI design (vslavik)
- Add release notes for visible warnings from initrd (jkonecny)
- Split NTP dialog to its own glade file (vslavik)
* Tue Aug 10 2021 Martin Kolman <mkolman@redhat.com> - 35.22-1
- Fix dependency on zram-generator in RHEL (sgallagh)
- tests: Fix failing ClearPartTestCase with latest blivet (vtrefny)
- Add brltty to boot.iso with default configuration (vslavik)
- Fix admin user password condition handling in TUI (854182924)
- Fix typo in docstring (vslavik)
* Thu Jul 29 2021 Martin Kolman <mkolman@redhat.com> - 35.21-1
- Add release notes for packaging log in tmux (jkonecny)
- Small fixes in the subscription structures (vponcova)
- Make critical warnings from Dracut more visible (#1983098) (jkonecny)
- Print Dracut errors encountered during boot after Anaconda starts (#1983098)
(jkonecny)
- Add function to print critical warnings more visible during boot (#1983098)
(jkonecny)
- dracut: read filename dhcp option from dhcpopts file (rvykydal)
- Disable anaconda-core's requirement on subscription-manager on CentOS (carl)
- Add new error reporting hook when Dracut timeout (#1983098) (jkonecny)
- Update boot-options.rst (31507393+Ultimate-etamitlU)
- Handle handle get_layout() method returning None (#1976526) (mkolman)
- Enable the zram-generator service on RHEL (vponcova)
* Tue Jul 20 2021 Martin Kolman <mkolman@redhat.com> - 35.20-1
- Improve logging from the DownloadProgress class (vponcova)
- Monitor the image installation progress with a new class (vponcova)
- Clean up the InstallFromImageTask class (vponcova)
- Clean up the InstallFromTarTask class (vponcova)
- Move the InstallFromImageTask class (vponcova)
- Disable installation tasks of the Live OS payload module (vponcova)
- Improve installation logs in the Security module (vponcova)
- Raise kickstart errors only during kickstart parsing (vponcova)
- Reuse the apply_partitioning function (vponcova)
- Verify the image checksum in an installation task (vponcova)
- Move the progress callback to the base payload class (vponcova)
- Revert "Disable failing test" (jkonecny)
- Check the support for the Subscription module on startup (vponcova)
- Activate DBus modules based on the new configuration options (vponcova)
- Add new configuration options for the DBus module activation (vponcova)
- Fix typing errors in the Security module (vponcova)
- remove authconfig support (pbrezina)
- Use C.UTF-8 if the requested locale is unsupported (vponcova)
- Don't match a non-POSIX locale with a POSIX langcode (vponcova)
- Show suggestions for an error caused by inconsistent sector sizes (vponcova)
- new window in tmux to tail packaging.log (jarrod)
* Mon Jul 12 2021 Martin Kolman <mkolman@redhat.com> - 35.19-1
- Don't return None from is_supported_filesystem (#1979854) (vponcova)
- Configure the multilib policy of the target system (vponcova)
- Reorder imports to reduce linter warnings (vslavik)
- Ignore falsy pylint missing member warning in dnf code (vslavik)
- Silence false pylint warning (vslavik)
- Don't use deprecated imp module in dracut test (vslavik)
- Fix typo in docs (vslavik)
- Replace (vslavik)
- Ignore pylint mistakes about missing members in test (vslavik)
- Remove the productVariant variable (vponcova)
- Document the profile configuration files (vponcova)
- Add support for the profile configuration files (#1974819) (vponcova)
- Replace inst.product and inst.variant with inst.profile (vponcova)
- Replace product configuration files with profiles (vponcova)
- Appease pylint's belief that this is not a string (vslavik)
- Update pylint directive for new warning name (vslavik)
- Revert "Fix unit test for previous commit" (lveyde)
- Revert "ovirt / rhv: drop swap partition" (lveyde)
* Mon Jun 28 2021 Martin Kolman <mkolman@redhat.com> - 35.18-1
- Use yescrypt hashing method for shadow passwords (besser82)
- Intercept OSError thrown by crypt.crypt() on error. (besser82)
- Add tests for system time setting (awilliam)
- Fix time setting for daylight savings, let Python do the work (awilliam)
- Update the pixel depth of xvnc server from 16 to 24 (rvykydal)
- Change the Python version to 3.10 in the makeupdates script (vponcova)
- Enable running container tests in parallel (jkonecny)
- Fix broken hashbang (vslavik)
- Fix typo in release docs (vslavik)
- Clean up the initialization of PartTypeSpoke (vponcova)
- Run installation tasks from ConfigureBootloaderWithTasks (vponcova)
- Add the CollectConfigureBootloaderTasks method (vponcova)
- Add the ConfigureBootloaderWithTasks method (vponcova)
- Add suggestions to kickstart error message in liveinst (vslavik)
- Fix potential use of uninitialized variable (vslavik)
- Fix potential use of uninitialized variable (vslavik)
- Fix literal curly braces in dracut scripts (vslavik)
- Fix logging messages (vslavik)
- Remove RPM_TESTS_ARGS support (jkonecny)
- Disable failing test (jkonecny)
- Disable pylint error in tests (jkonecny)
- Disable glade tests (jkonecny)
- Migrate rpm_tests to python3 unittest framework (jkonecny)
- Rename rpm_tests to make them discoverable by unittest framework (jkonecny)
- Fix tests README file (jkonecny)
- Change NOSE_TESTS_ARGS to a similar logic for unittest framework (jkonecny)
- Fix services after nosetests renaming to unit_tests (jkonecny)
- Rename nosetests execution scripts and vars to unit_tests (jkonecny)
- Rename nosetests folder to unit-tests (jkonecny)
- Make it possible to skip install time Insights errors (#1931069) (mkolman)
- Run our unit tests with unittest python3 framework (jkonecny)
- Rename all unit tests methods to use test_* prefix (jkonecny)
- Rename all tests files to make them discoverable by unittest (jkonecny)
- Remove the upd-updates script (vslavik)
- Remove the merge-pr script (vslavik)
- Apply the bootloader options before the installation (vponcova)
* Tue Jun 15 2021 Martin Kolman <mkolman@redhat.com> - 35.17-1
- Fix import of Iterable from collections (rvykydal)
- Move the support for the treeinfo metadata into a DBus module (vponcova)
- Add support for configuration of the DNF substitution variables (vponcova)
- Remove the _install_tree_metadata attribute (vponcova)
- Add unit test for biosdevname package requirement (rvykydal)
- Require biosdevname package if biosdevname=1 boot option is set (rvykydal)
- Make clear that team and vlan from ks in initramfs is not supported
(rvykydal)
- Fixed some more PEP8 issues in installation.py (lveyde)
- Don't allow reformat if the requested file system is unsupported (vponcova)
- Always exclude unsupported file systems (vponcova)
- Remove btrfs from the list of unsupported file systems (vponcova)
- Clean up the get_supported_filesystems function (vponcova)
- Clarify the implementation of GetFormatTypeData (vponcova)
- Run tests on every push to a base branch (vponcova)
- Introduce the docs/release-notes directory (vponcova)
* Wed May 26 2021 Martin Kolman <mkolman@redhat.com> - 35.16-1
- Add kickstart tests support for RHEL-9 branch (#infra) (jkonecny)
- Add a log message for successful installation (vslavik)
- Remove base container from kickstart-test workflow (#infra) (jkonecny)
- Change the description of "Encrypt my data" in the custom partitioning spoke
(vponcova)
- Use anaconda-iso-creator container to build boot.iso (#infra) (jkonecny)
- Use consistent shell formatting in kickstart-tests workflow (#infra)
(jkonecny)
- Rename lorax_build_container in kickstart-tests workflow (#infra) (jkonecny)
- Add Dockerfile for lorax iso build with Anaconda (#infra) (jkonecny)
- Remove the configuration file for Fedora Workstation Live (vponcova)
- Rename the configuration file for CentOS Stream (vponcova)
- Remove the configuration file for CentOS Linux (vponcova)
- Don't set the home directory to None (#1960803) (vponcova)
- Enable back ELN Anaconda daily builds (jkonecny)
- Add nightly builds also for ELN containers (jkonecny)
- Enable debug output when building containers (#infra) (jkonecny)
- Show mount points for other types of actions (#1953134) (vponcova)
- Populate the missing keyboard values before the payload installation
(vponcova)
- Clarify how branches are merged back for contributors to pick a target
(javierm)
- Install kbd-legacy if keyboard layout is "fi" (#1955793) (awilliam)
* Mon May 17 2021 Martin Kolman <mkolman@redhat.com> - 35.15-1
- Make the coverage status about tests informational (vponcova)
- network: check NM availability before running some methods (#1937185)
(rvykydal)
- Migrate from pytz to zoneinfo, list (close to) all time zones (miro)
- Change logic in NFS validation (vslavik)
- Avoid a race condition during Connect to Red Hat spoke initialization
(mkolman)
- Tweak dependabot configuration (jkonecny)
- Use .codecov.yml from the main branch (vponcova)
- Fix boot options generated by the dracut module (vponcova)
- Simplify the code for working with kickstart repositories (vponcova)
- Remove the _enabled_repos property of the DNF payload (vponcova)
- Remove the addons property of the DNF payload (vponcova)
- Move post installation scripts to the end of queue (lveyde)
- Add support for repomd.xml hashes to the DNF manager (vponcova)
- Deduplicate dependency metapackages (vslavik)
- Do not use pip cache when building containers (#infra) (vslavik)
- Revert "Use GitHub environment gating for kstests workflow" (#infra)
(jkonecny)
- Move NTP server dialog to its own file (vslavik)
- Simplify the unit tests with DNF repositories (vponcova)
- Test GetFormatTypeData for all format types (vponcova)
- Add the repositories property to the DNF manager (vponcova)
- Remove comments about ConditionArchitecture (vslavik)
- Add common bug with incomplete VG because of ignoredisk (jkonecny)
- Fix AskVNCSpoke call (vslavik)
- Improve X startup error messages (vslavik)
- Terminate X server after timeout and restore crash test handler (vslavik)
- Reorganize control flow in startX (vslavik)
- Handle SIGUSR1 correctly after Xorg timeout (vslavik)
- Refactor minor details in startX (vslavik)
- Small fixups of metacity replacement. (rvykydal)
- Remove unnecessary workaround to always build ELN containers (#infra)
(jkonecny)
- Remove temp workaround to solve podman issue on GH runners (#infra)
(jkonecny)
- makebumpver: allow BZ to be also in POST (#infra) (rvykydal)
- scripts: do not require "Fixed in version" set for release (#infra)
(rvykydal)
- Remove github-action-run-once script from anaconda-ci (#infra) (jkonecny)
- Clean DNF to make the anaconda-rpm container smaller (#infra) (jkonecny)
- Add the load_repository method to the DNF manager (vponcova)
- Add a badge with the current coverage (vponcova)
- Configure codecov.io (vponcova)
- Upload coverage to codecov.io (vponcova)
- Add base repo name for CentOS Stream after repository renaming (jkonecny)
- Remove parse-kickstart tests which don't test anything useful (rvykydal)
- Fix basic dracut parse-kickstart tests for network configuration (rvykydal)
- Fix parse-kickstart bridge test (rvykydal)
* Wed May 05 2021 Martin Kolman <mkolman@redhat.com> - 35.14-1
- Document too little memory for LUKS setup (vslavik)
- Remove redundant logging messages from the DNF module (vponcova)
- Use the new support for checking the software selection in UI (vponcova)
- Add an installation task for resolving the packages selection (vponcova)
- Add a validation task for checking the packages selection (vponcova)
- Handle marking errors in the DNF manager (vponcova)
- Add the clear_selection method to the DNF manager (vponcova)
- Add the resolve_selection method to the DNF manager (vponcova)
- Remove the bugUrl variable (vponcova)
- Remove the productStamp variable (vponcova)
- Remove the productArch variable (vponcova)
- Improve debug message about configuration loading and writing (jkonecny)
- Enable closest mirror in CentOS Stream config (carl)
- The kernel boot argument sshd is removed and should warn user (jkonecny)
- Document the workaround for missing options of the repo command (vponcova)
- Replace metacity with gnome-kiosk (rvykydal)
- Drop deprecated support for comps from the DNF payload class (vponcova)
- Use the software selection cache in GUI (vponcova)
- Use new fedora-latest alias in COPR (jkonecny)
* Tue Apr 27 2021 Martin Kolman <mkolman@redhat.com> - 35.13-1
- Disable ELN for our unit and rpm tests (jkonecny)
- Disable ELN builds for Packit (jkonecny)
- Fix unit test for previous commit (sbonazzo)
- Add hotfix for Ubuntu hosts for container refresh (jkonecny)
- ovirt / rhv: drop swap partition (sbonazzo)
- Fix the broken rootless podman on Ubuntu 20.04 20210419.1 (vponcova)
- Increase the minimal suggested size for /boot (vslavik)
- Support bond device activated in initramfs from kickstart (rvykydal)
- fix tests for RHV (sbonazzo)
- rhvh: fix EULA path for RHV-H (sbonazzo)
- Adapt tests to the new ostree user defined mount points (#1906735) (jkonecny)
- Fix RPMOSTree mount to the non-existing directory (#1906735) (jkonecny)
- Use the software selection cache in TUI (vponcova)
- Add the SoftwareSelectionCache class (vponcova)
- Add the get_software_selection_status function (vponcova)
- Add the is_software_selection_complete function (vponcova)
- Clean up the collect_platform_requirements function (vponcova)
- Add the match_available_packages method to the DNF manager (vponcova)
- Add the is_package_available method to the DNF manager (vponcova)
- Remove product-specific data from the Anaconda stylesheet (vponcova)
- s: make it better (vslavik)
- Replace use of imp with importlib in collect() (vslavik)
- Document the issue about the ignoredisk command and installation sources
(vponcova)
- Describe the common bug in the Issue paragraph (vponcova)
- Run RHEL COPR builds on kstest (vslavik)
- Allow to use no default product configuration (#1947939) (vponcova)
- Make sure rhsm.service is running at Anaconda startup (mkolman)
- Add display-related dependencies (vslavik)
- Set up the Storage spoke in TUI on every entry (vponcova)
- subscription: allow dates in ISO 8601 format (ptoscano)
* Mon Apr 12 2021 Martin Kolman <mkolman@redhat.com> - 35.12-1
- Remove patches to avoid forcing inst. prefix on RHEL 9 (jkonecny)
- Allow to exclude the kernel-lpae package (vponcova)
- Remove the pwpolicy kickstart command (vponcova)
- Do not generate dracut arguments multiple times for some storage devices
(rvykydal)
- Run RHEL8 contributor tests on kstest runners (vslavik)
- Add support for comps to the DNF manager (vponcova)
- Add DBus structures for comps data (vponcova)
- Add the is_cdn_registration_required function (vponcova)
- Use the default_environment property in UI (vponcova)
- Add the default_environment property to the DNF manager (vponcova)
- Create the substitute method (vponcova)
- Rename tests-owners to just tests (jkonecny)
- Use GitHub environment gating for kstests workflow (jkonecny)
- Replace our Fedora owners check by GH environments for our workflows
(jkonecny)
- Fix a small typo in common bugs (jkonecny)
* Wed Mar 31 2021 Martin Kolman <mkolman@redhat.com> - 35.11-1
- Turn off wrapping of the scale values (vponcova)
- Make the scale visible by default (#1943370) (vponcova)
* Tue Mar 30 2021 Martin Kolman <mkolman@redhat.com> - 35.10-1
- Update unit test for GetDracutArguments for FCoE (rvykydal)
- Make failure in generating of dracut arguments for iSCSI device non-fatal.
(rvykydal)
- network: match also connections named by MAC created by NM in initramfs
(rvykydal)
- Create /tmp with the right permissions (#1937626) (vponcova)
- Don't recommend zram-generator-defaults (#1938132) (vponcova)
- Don't automatically execute the default partitioning (vponcova)
- Fix the warning about working NTP servers (#1889180) (vponcova)
- Remove implicit dependencies (vponcova)
- Don't install anaconda-install-env-deps by default (vponcova)
- Document SSH root password login issues & possible workaround (mkolman)
- Add groups to kickstart tests lorax output (vslavik)
* Mon Mar 22 2021 Martin Kolman <mkolman@redhat.com> - 35.9-1
- Improve logging of the download and install sizes (vponcova)
- Clean up the code for finding sufficient mount points (vponcova)
- Remove pyanaconda.payload.dnf.utils (vponcova)
- Move code for cleaning up the download location (vponcova)
- Add the get_free_space_map function (vponcova)
- Move code from the space_required property (vponcova)
- Check if the mount point exists before calling statvfs (#1824357) (vponcova)
- Move code from _pick_download_location (vponcova)
- Move the get_df_map and pick_mount_point functions (vponcova)
- Use a custom stylesheet to define Fedora-specific stylesheet data (vponcova)
- Replace download_location with a local variable (vponcova)
- Handle modules in the DNF manager (vponcova)
- Handle the module command in the Payloads module (vponcova)
- ostree: ignore exit code 65 for systemd-tmpfiles (vponcova)
- Mark usage of IOError for further investigation (vslavik)
- Replace IOError by OSError in scripts (vslavik)
- Replace IOError by OSError in dracut code (vslavik)
- Replace IOError by OSError for file operations (vslavik)
- Move the code for installing packages into a task (vponcova)
- Replace IOError when looking up glade files (vslavik)
- Replace IOError when starting DBus (vslavik)
- Improve messages for the Flatpak installation (vponcova)
- Clean up the arguments of the OSTree installation tasks (vponcova)
- Change the arguments of ChangeOSTreeRemoteTask (vponcova)
- Use the RPM OSTree module to install flatpacks (vponcova)
- Move the code for downloading packages into a task (vponcova)
- Use the RPM OSTree module to install the payload (vponcova)
- Add the _get_source method to the payload modules (vponcova)
- Fix unknown error when entering wrong NFS URL address (30516382+century6)
- Replace IOError when downloading .treeinfo (vslavik)
- consicous lang: fix a fallout of slave -> port patch (rvykydal)
- Add logging for iSCSI / FCoE dracut arguments (rvykydal)
* Wed Mar 10 2021 Martin Kolman <mkolman@redhat.com> - 35.8-1
- Make kickstart tests run on branched fedora branches (vslavik)
- Do not follow symlinks when copying /etc/resolv.conf (#1933454) (rvykydal)
- Make contributor tests work on braneched Fedora (vslavik)
- Remove container refresh workaround for ELN (jkonecny)
- Use the volume UUID to search for the GRUB config in btrfs partitions
(javierm)
- network: remove unneeded line wrap (rffontenelle)
- Drop python3-syspurpose dependency (mkolman)
- Remove crun build folder after crun build (jkonecny)
- Remove crun version abort for container refresh workflow (jkonecny)
- Split the packages configuration data (vponcova)
- Hide members of the DNF payload (vponcova)
- Replace the FlatpakInstallError exception (vponcova)
- Replace the PayloadInstallError exception in the Payloads module (vponcova)
- Replace the InstallError exception (vponcova)
- Build new crun version for ELN container refresh (jkonecny)
- Adjust github owner tests for this (master) branch (vslavik)
- Create a task for tearing down OSTree mount targets (vponcova)
- Include some of the payload installation tasks by default (vponcova)
- Extend the DBus API of the Payloads service (vponcova)
- Add the service_proxy property (vponcova)
- Fix copypaste typo in github owner tests (vslavik)
- conscious lang: rename /etc/modprobe.d/anaconda-blacklist.conf (rvykydal)
- Fix running tests for the f34-devel branch (vslavik)
- change the grub2 user.cfg permission from 0600 to 0700 (854182924)
- Add the installation source for flatpaks (vponcova)
- Handle exceptions inside the CopyBootloaderDataTask class (vponcova)
- conscious lang: replace 'master store' with 'primary store' in a doc text
(rvykydal)
- conscious lang: replace 'slave' in network related code (rvykydal)
- conscious lang: replace 'master' in network related code (rvykydal)
- conscious lang: replace slaves with ports in network GUI (rvykydal)
- conscious lang: remove blacklist from pylint configuration file (rvykydal)
- conscious lang: rename payload function for adding a module do a denylist
(rvykydal)
- conscious lang: remove warning for removed blacklist and nofirewire commands
(rvykydal)
- conscious lang: replace blacklisting in boot options documentation (rvykydal)
* Tue Mar 02 2021 Martin Kolman <mkolman@redhat.com> - 35.7-1
- Wrap text in spoke title labels, if needed (vslavik)
- Wrap welcome spoke title if needed (vslavik)
- Choose the best locale more carefully (#1933384) (vponcova)
- Make the user interface context safe for the initial setup (vponcova)
- Add support for tear-down of the payload modules (vponcova)
- Add the GetKernelVersionList method (vponcova)
* Thu Feb 25 2021 Martin Kolman <mkolman@redhat.com> - 35.6-1
- The network spoke should be visible in live spins (#1932961) (vponcova)
- Ignore Pylint errors on DNF API (vslavik)
- Ignore Pylint errors for PropertiesChanged.connect (vslavik)
- Silence false Pylint warning (vslavik)
- Ignore false Pylint errors for Enum subclasses (vslavik)
- Determine GRUB directory relative path to use in config file (javierm)
* Mon Feb 22 2021 Martin Kolman <mkolman@redhat.com> - 35.5-1
- Add the "Encrypt my data" checkbox to the custom partitioning spoke
(vponcova)
- Don't translate prompt keys (#1892830) (vponcova)
- Fix RHEL zram conditional in spec file (mkolman)
- Use older Ubuntu for container auto-update workflow (jkonecny)
- Remove interactive parameter from container-rpm-test (jkonecny)
- Use docker as container engine for time required (jkonecny)
- Add container push for rpm containers (jkonecny)
- Enable our and blivet COPR repositories for rpm tests (jkonecny)
- Add support for anaconda-rpm containers to refresh workflow (jkonecny)
- Fix base container specification in refresh workflow (jkonecny)
- Store logs from container refresh separately (jkonecny)
- vconsole font selection to cover more langs (suanand)
* Thu Feb 18 2021 Martin Kolman <mkolman@redhat.com> - 35.4-1
- Do not try to push latest from ELN tag (jkonecny)
- Adapt Packit configuration for master (jkonecny)
- Add support for f34 and eln branches to container refresh workflow (jkonecny)
- [Storage] add btrfs_compression option (#1928857) (michel)
- Adjust branch config ater merge (vslavik)
- Enable Makefiles and Dockerfiles for branched Fedora (vslavik)
- packit: make tests ⊂ builds for the chroot set (ttomecek)
- packit: run all actions in a single action (ttomecek)
- configure.ac: make the Copyright up to date (ttomecek)
- ovirt: rebase on CentOS Stream (sbonazzo)
- Use a custom stylesheet to define RHEL-specific stylesheet data (vponcova)
- Remove unused variables from Makefile (vslavik)
- Drop astroid hotfix patch (jkonecny)
- Add table of git branches (jkonecny)
- Drop astroid hotfix patch (jkonecny)
- Don't block the start of the Network module by the hostname service
(vponcova)
- Remove unused variables related to mock (vslavik)
- Save lorax-packages.log to installed system (rvykydal)
* Mon Feb 15 2021 Martin Kolman <mkolman@redhat.com> - 35.3-1
- Do not hard-require zram-generator-default on RHEL just yet (mkolman)
- Switch back Packit testing to rawhide after merge from f34-devel (jkonecny)
- Improve Packit configuration to use fedora-development (jkonecny)
- Add a kickstart specification for the main process (vponcova)
- Adapt Packit configuration to a newly branched Fedora (jkonecny)
- Create swap by default in RHEL-based installations (#1915297) (vponcova)
- Add missing space to a message (vslavik)
- Use Linux HOST_NAME_MAX hostname length limit (xiaqirong1)
* Fri Feb 12 2021 Martin Kolman <mkolman@redhat.com> - 35.2-1
- Rename pyanaconda.modules.common.typing (vponcova)
* Thu Feb 11 2021 Martin Kolman <mkolman@redhat.com> - 35.1-1
- Add dependabot support for GitHub actions (jkonecny)
- Set volume id for iso built for kickstart test (rvykydal)
- Guess the default product name from the os-release files (vponcova)
- Apply overrides for the anaconda widgets only in the test environment
(vponcova)
- Create real updates images (vponcova)
- Remove deprecated support for add-ons (vponcova)
- Don't run installation tasks of add-ons in a meta task (vponcova)
- network: wrap IP addresses showed in GUI for wireless devices (#1925781)
(rvykydal)
- Install support for non-ascii keyboard layouts (#1919483) (vponcova)
* Mon Feb 08 2021 Martin Kolman <mkolman@redhat.com> - 34.24-1
- Modify spec file to add patches required on rhel-9 rebuild (#1907566)
(jkonecny)
- Unify GRUB configuration file location across all platforms (javierm)
- Do not use redirector for rawhide repository for iso building on PR
(rvykydal)
- Move finding flatpak size to a task (vslavik)
- Move flatpak installation code to a task (vslavik)
- Move and rename FlatpakPayload (vslavik)
- Abort with a message on invalid host name in kickstart (vslavik)
- Use redirector for rawhide repository for iso building on PR (rvykydal)
- Add tests for the inst. prefix requirement (#1912502) (jkonecny)
- Do not support no inst. Anaconda boot args in systemd services (#1912502)
(jkonecny)
- Remove check to avoid process of help and version boot args (#1912502)
(jkonecny)
- Remove Anaconda boot arguments without inst. prefix from stage2 (#1912502)
(jkonecny)
- Add support for non-critical installation errors (vponcova)
- Don't run a canceled task (vponcova)
- Fix exclude arguments of tar payload extracting. (rvykydal)
- Remove support for boot arguments without 'inst.' prefix from Dracut
(#1912502) (jkonecny)
- Cache flatpak size instead of persistent instance (vslavik)
* Fri Feb 05 2021 Martin Kolman <mkolman@redhat.com> - 34.23-1
- Add a metapackage for image (boot.iso) dependencies (vslavik)
- Take dnf substitutions from installer environment configuration (rvykydal)
- Fix getting kernel version list for liveimg (rvykydal)
* Wed Feb 03 2021 Martin Kolman <mkolman@redhat.com> - 34.22-1
- Don't initialize the software selection if the payload is not set up
(#1916114) (vponcova)
- Unify the ready methods of the software selection spokes (vponcova)
- Deprecate the interactive-defaults.ks file (vponcova)
- Deprecate the %anaconda section and the pwpolicy command (vponcova)
- Apply the pwpolicy kickstart command (vponcova)
- Upate repo url for kickstart tests run on PR (rvykydal)
- Adjust RHV-H product config to match real implementation (sbonazzo)
- Add DBus support for the password policies (vponcova)
- Don't use the pwpolicy kickstart command (vponcova)
- Create a DBus structure for the password policy (vponcova)
- Add the password_policies configuration option (vponcova)
- Move Users module tests to a directory (vslavik)
- Move Security module tests to a directory (vslavik)
- Move partitioning specification test to directory (vslavik)
- Move Payloads module and source tests to a directory (vslavik)
- Move Network module tests to a directory (vslavik)
- Add the configuration options can_change_root and can_change_users (vponcova)
- Remove some unused methods from the FSSet class (vponcova)
- Mount the /tmp of the installed system as a tmpfs (#1306452) (vponcova)
- Create the get_system_filesystems function (vponcova)
- Create the collect_filesystems method (vponcova)
- Do not use cache for container build (jkonecny)
- Update list of projects to test after move from Zanata to Weblate (vtrefny)
- Ignore fallback ITS rule warning from gettext (vtrefny)
- Switch the license to LGPL (dshea)
* Thu Jan 28 2021 Martin Kolman <mkolman@redhat.com> - 34.21-1
- Allow to disable the Security module (vponcova)
- Add important files for container build to rebuild check (jkonecny)
- Avoid using DockerHub because of limits (jkonecny)
- anaconda should add only s390utils-core (dan)
- Fix root password and LUKS passphrase visibility toggle (#1911360) (mkolman)
- Fix the should_run methods of the network spoke (vponcova)
- Prevent shell injection from a /kickstart-test comment (jkonecny)
- network: validate bond options on our side after change in NM (#1918744)
(rvykydal)
- network: fix bond confiuration for empty bond options (#1918744) (rvykydal)
- Allow to disable the Services module (vponcova)
* Fri Jan 22 2021 Martin Kolman <mkolman@redhat.com> - 34.20-1
- Add master unit-tests to contributors (gated) workflow (jkonecny)
- Add master test execution for owners for this repository (jkonecny)
- Rename validate-rhel-8 workflow to tests-contributors (jkonecny)
- Specify version 3 of GTK+ and GDK for fedora-welcome (awilliam)
* Thu Jan 21 2021 Martin Kolman <mkolman@redhat.com> - 34.19-1
- Fix nose tests execution command when installed from pip (jkonecny)
- Add missing nose test dependency back from pip (jkonecny)
- Use RHEL help content for RHV/Ovirt (mkolman)
- Remove build-time dependencies for nose tests (vslavik)
- Allow to disable the Localization module (vponcova)
- Rename kickstart status reporting to kickstart-test (jkonecny)
- Skip storage-related spokes in the initial setup (#1918048) (vponcova)
- Support should_run for standalone GUI spokes (vponcova)
- GH workflow: do not fail all matrix jobs on failure of one (jkonecny)
- Update versions of the kickstart commands (vponcova)
- network: handle wireless configure button sensitiveness (rvykydal)
- Allow to disable the network installation (vponcova)
- Allow to disable the Users module (vponcova)
- Allow to disable the Timezone module (vponcova)
- Select disks for implicit partitions (vponcova)
- Extend the PartSpec class (vponcova)
- for non-ascii keyboard layouts, set 'native' to the virtual console
explicitly Resolves: rhbz#1912609 (suanand)
* Mon Jan 18 2021 Martin Kolman <mkolman@redhat.com> - 34.18-1
- Skip payload-related spokes in the initial setup (#1915541) (vponcova)
- Always show pykickstart parse warnings (vslavik)
- Grab GitHub notifications for periodic workflows (jkonecny)
- Split OSTree sysroot-setting to a task (vslavik)
- Split OSTree pull to a task (vslavik)
- Split OSTree deployment to a task (vslavik)
- Stop the timer that calls a callback for clicking on the continue button
(vponcova)
- Formatting fixes (vslavik)
- Split OSTree bootloader configuration to a task (vslavik)
- Split OSTree remote changes to a task (vslavik)
- Split OSTree fs and repo initialization to a task (vslavik)
- Split OSTree bootloader data copying to a task (vslavik)
- Split OStree mount target preparation to a task (vslavik)
- Move the RPM OSTree test to a directory (vslavik)
- Move the safe_exec_with_redirect function (vslavik)
- Save logs correctly after container update GH action run (jkonecny)
* Mon Jan 11 2021 Martin Kolman <mkolman@redhat.com> - 34.17-1
- Always report IPMI events from the exit dialog windows (vponcova)
- Always report IPMI events from the exception handler (vponcova)
- Always log IPMI events (vponcova)
- Add a new handler for PayloadSetupError and SourceSetupError (vponcova)
- Remove the error handlers for removed or unused DNF errors (vponcova)
- Refactorize the code for handling marking errors (vponcova)
- Don't run the error handler in the installation code (vponcova)
- Don't run the error handler if there is no callback (vponcova)
- Reorganize the mapping of error handlers (vponcova)
- Remove the error handler for no such group (vponcova)
- Remove the error handler for invalid image size (vponcova)
- Flush stdout during the TUI installation (vponcova)
- Set the PR status ASAP for kickstart tests (jkonecny)
- Always update container images before running workflow (jkonecny)
- Solve problem with missing loop device for kstest run (jkonecny)
- Remove the error handler for the missing image (vponcova)
- Remove the error handler for the unsupported algorithm (vponcova)
- Handle errors in the installation tasks (vponcova)
- Initialize librepo logger (#1908286) (pkratoch)
- Add rpm-tests support for external contributors (jkonecny)
- Don't run the execute method in the kickstart installation in TUI by default
(vponcova)
- Don't run spokes that don't support live payloads (vponcova)
- Don't run spokes that don't support dir installations (vponcova)
- Don't run spokes that don't support non-package payloads (vponcova)
- Create a user interface context (vponcova)
- Add how to run a subset of nosetests to tests README (jkonecny)
- Fix warning when running a subset of nosetests (jkonecny)
- network: fix double-free using libnm function filter_connections() (rvykydal)
- Provide a hint for the desired capacity (vponcova)
- Fix python3 rpm package name in spec file (jkonecny)
- Allow to interrupt media verification (#1349152) (honza.stodola)
- Use correct identity for ELN (sgallagh)
- virtualization: add missing /var/crash (sbonazzo)
* Mon Jan 04 2021 Martin Kolman <mkolman@redhat.com> - 34.16-1
- Enable rpm-tests on Fedora ELN (mpitt)
- Fix create_rpm_test on Fedora ELN/RHEL (mpitt)
- Fix container-rpm-test log output (mpitt)
- Define container for running rpm-tests (mpitt)
- Move to official fedora ELN container image (mpitt)
- Remove 'firstboot --enable' from interactive defaults (vponcova)
- Build real boot.iso for /kickstart-tests runs (mpitt)
- Fix artifact name in kickstart-tests.yml workflow (mpitt)
- Import imp on demand (vponcova)
- Adapt UI and tests to localhost.localdomain setting removal (rvykydal)
- Stop trying to set the default hostname (zbyszek)
- Document how to run kickstart tests in anaconda PRs (mpitt)
- Update the GitHub workflow documentation (mpitt)
- Add description of our GH workflow to tests/README file (jkonecny)
- Remove the support for updates on a floppy disk (vponcova)
- Fix list of Anaconda tests (jkonecny)
- Disable the debug solver debugging (vponcova)
- Select groups from a kickstart file in GUI (vponcova)
- Remove kickstart packages from GUI (vponcova)
- Remove kickstart packages from TUI (vponcova)
- Remove kickstart packages from the DNF payload class (vponcova)
- Remove kickstart packages from the installation tasks (vponcova)
- Remove kickstart packages from the DNF utilities (vponcova)
- Remove kickstart packages from the DNF manager (vponcova)
- Handle the %packages section in the DBus module (vponcova)
- Add the PackagesSeen property (vponcova)
- Add CentOS Stream config (riehecky)
- Deprecate the level option of the logging kickstart command (vponcova)
* Mon Dec 07 2020 Martin Kolman <mkolman@redhat.com> - 34.15-1
- Drop old WiFi & geocoding based geolocation support (mkolman)
- Add bot PR comment to run kickstart tests (mpitt)
- Migrate Anaconda daily COPR builds to Packit (jkonecny)
- Fix missing inst. prefixes for bootloader options in documentation (jkonecny)
- network: make generating of kickstart more robust (#1897832) (rvykydal)
- Fixup category sorting (mkolman)
- Place the user tasks into the right task queue (rvykydal)
- Lower geolocation connection timeout to 5 seconds (#1774873) (mkolman)
- Remove unused hubQ messages (vponcova)
- Remove the justUpdate argument (vponcova)
- Don't run the execute method in the kickstart installation in GUI by default
(vponcova)
- Don't use an empty string as a system root (vponcova)
- Fix logs from the get_os_release_value function (vponcova)
- Don't enter spokes after we leave the Summary hub (vponcova)
- network: rename Gtk cell renderer to prevent name collision (rvykydal)
- network: add unit tests for SecretsAgent (rvykydal)
- network: make SecretAgentDialog a bit more robust (rvykydal)
- network: move wireless secret agent bits into a separate file (rvykydal)
- Fix the logic for enabling latest updates (vponcova)
- Add better explanation what the `make admin user` means (#1803251) (jkonecny)
- Define the updates repositories in the Anaconda configuration files
(#1642513) (vponcova)
- Migrate User spoke glade file to 3.38 version (jkonecny)
- network: migrate SecretAgent from python-dbus to dasbus (rvykydal)
- Translate spoke category title directly at runtime (mkolman)
- Add description and links for bug keyword searches (vslavik)
- Apply pylint excessive memory usage fix (mpitt)
- Set shorter workflow timeouts (mpitt)
- Fix issue when ns_info cannot be retrieved for NVDimm namespace (jkonecny)
- Allow encryption of thin logical volumes (vponcova)
- Fix error in initrd: shift count out of range (honza.stodola)
* Tue Nov 24 2020 Martin Kolman <mkolman@redhat.com> - 34.14-1
- Set workflow temp mail and user to GH actions rebase (jkonecny)
- Rebase test pull request also for rhel-8 contributors (jkonecny)
- Build Anaconda for ELN (jkonecny)
- Create the get_kernel_version_list function for the DNF payload (vponcova)
- Create the sort_kernel_version_list function (vponcova)
- Move the unit tests for the payload base utils to a new file (vponcova)
- Remove the duplicate code for kernel version lists (vponcova)
- Move the get_kernel_version_list function to the Live OS utilities (vponcova)
- network: do not use dialog for just single wireless connection to configure
(rvykydal)
- Add the apply_specs function (vponcova)
- Add the get_installation_specs function (vponcova)
- Add the get_default_environment function (vponcova)
- Add the environments property to the DNF manager (vponcova)
- Set the RPM macros with an installation task (vponcova)
- network: fix configuration of wireless networks (rvykydal)
- Rebase branches to current master before testing (mpitt)
- network: use dialog instead of combobox to select wireless network (rvykydal)
- network: deal with obsolete ssid when configuring wireless (rvykydal)
- network: use function instead of assigned lambda in wireless activation
(rvykydal)
- network: do not update wireless AP combo active item when not necessary
(rvykydal)
- network: do not use obsolete access points in wireless configuration
(rvykydal)
- Add upstream tag hint for Packit (jkonecny)
- Create an installation task for import of RPM keys (vponcova)
- Remove leftover bootloader-related code from the Payloads service (vponcova)
- Add workflow for daily RHEL COPR build (mpitt)
- Remove the storage logger (vponcova)
- Remove the loglevel option (vponcova)
- Remove the support for changing the log level (vponcova)
- Handle missing spice-vdagent (#1897153) (vponcova)
- rhbz#1888697 list important major languages (suanand)
- Run master tests on Fedora ELN (mpitt)
- Fix handling of empty $CI_TAG (mpitt)
- Skip blivet-gui tests on Fedora ELN (mpitt)
- Drop obsolete id: from validate workflow (mpitt)
- Create the get_download_size method (vponcova)
- Create the get_installation_size method (vponcova)
- Create the dump_configuration method (vponcova)
- Create the configure_base function (vponcova)
- Create the configure_proxy method (vponcova)
- Create an abstraction of the DNF base (vponcova)
- Create the configure_dnf_logging function (vponcova)
- Create the get_os_release_value function (vponcova)
- Create the get_product_release_version function (vponcova)
- Drop testing in mock (mpitt)
- Remove the method command (vslavik)
- Fix incomplete configuration of repositories loaded from treeinfo (#1745064)
(honza.stodola)
- Fix checking ssl certificate for metadata (#1745064) (honza.stodola)
- Root password is mandatory if there is *not* admin user. (rvykydal)
* Thu Nov 12 2020 Martin Kolman <mkolman@redhat.com> - 34.13-1
- Skip add-on modules that failed to start (vponcova)
- Return the exit status of a Python module that failed to start (vponcova)
- Fix the priority of the ostreesetup kickstart command (#1896761) (vponcova)
- Drop obsolete dependency_solver.py script from rpm-tests (mpitt)
- Run a DBus task to configure FIPS on the installed system (vponcova)
- Run a DBus task to set up FIPS for the payload installation (vponcova)
* Thu Nov 12 2020 Martin Kolman <mkolman@redhat.com> - 34.12-1
- Use podman for pushing the nightly container update (mpitt)
- Robustify container-autoupdate workflow (mpitt)
- Disable seccomp profile when running containers on Ubuntu host (mpitt)
- Use podman in GitHub workflows (mpitt)
- Remove deviceprobe and install commands (vslavik)
- Change handling of UID and GID values (vslavik)
- Send UID and GID over D-Bus as UInt32 (vslavik)
- Correct limits for UIDs and GIDs in GUI (vslavik)
- Rename Subscription module tests (vslavik)
- Rename common module tests (vslavik)
- Rename Boss module tests (vslavik)
- Remove autostep functionality (vslavik)
- Don't include unknown files in the updates image (vponcova)
- Clean up the code for the platform-specific partitioning requirements
(vponcova)
- Use a property for the platform-specific stage1 constraints (vponcova)
- Use a property for the stage1 device descriptions (vponcova)
- Use a property to provide a suggestion for the stage1 device (vponcova)
- Use a property to define non-linux format types (vponcova)
- Use a property to define platform-specific packages (vponcova)
- Do not fail user check job in rhel-8 validate workflow (jkonecny)
- Move the code that sets up the default disklabel type from platform.py
(vponcova)
- Add unit tests for platform.py (vponcova)
- Revert "Standardize calls to parent via super()" in platform.py (#1858649)
(vponcova)
* Thu Nov 05 2020 Martin Kolman <mkolman@redhat.com> - 34.11-1
- Fix user permission checking for rhel-8 validate task (jkonecny)
- Adjust rhel-8 log retrieval for changed container volume handling (mpitt)
- Don't clobber host checkout on `make container-ci` (mpitt)
- Drop anaconda-ci container entrypoint (mpitt)
- workflows: Add manual triggering of tests (mpitt)
- Fix and robustify validate workflow (mpitt)
- Mock os.stat in the unit tests (vponcova)
- Fix traceback when starting installation with inst.console (no args)
(jkonecny)
- Add container image build badge (jkonecny)
- Rename our GH action for container build to a better name (jkonecny)
- Improve the documentation of inst.variant (vponcova)
- Add selinux=0 boot parameter when SELinux is set to disabled (#1882464)
(omosnace)
- Clean up the Payload class (vponcova)
- Update the NVDIMM actions before we generate the output kickstart (vponcova)
- Make the storage available to the NVDIMM module (vponcova)
- Remove the execWithCaptureBinary function (vponcova)
- Remove unused getters from the Subscription spoke (vponcova)
- Remove an unused getter from the NetworkControlBox class (vponcova)
- Remove the URLType enum (vponcova)
- Remove the method_type property from the source classes (vponcova)
- Remove the subscription-related unused code (vponcova)
- Remove the DBus method GetPartitioned (vponcova)
- Remove the active attribute from the FSSet class (vponcova)
- Remove the short_label attribute from the BootLoaderImage class (vponcova)
- Remove the can_dual_boot attribute from the Bootloader class (vponcova)
- Remove the langcode_matches_locale function (vponcova)
- Remove unused properties from the GeocodingResult class (vponcova)
- Remove payload-related unused code (vponcova)
- Remove unused code (vponcova)
- kickstart.py: fix typo (kai.kang)
- Remove the debug flag (vponcova)
- Add workaround to fix support for installtree without repo (jkonecny)
- Build container image only if the container files changed (jkonecny)
- Names of signal handlers should have the on_ prefix (vponcova)
- Move UI test to a directory (vslavik)
- Move Storage module tests to directories (vslavik)
- Move Localization module tests to directory (vslavik)
- Change documentation - it's not required to build the container (jkonecny)
- Push also latest tag just for master container (jkonecny)
- Push new image only if unit tests went well (jkonecny)
- Add GH workflow to build and push master container to registry (jkonecny)
- Add anaconda-ci-push to Makefile to push container (jkonecny)
- Use our container registry to tag anaconda-ci container (jkonecny)
- Rename ci-tasks container to anaconda-ci (jkonecny)
* Fri Oct 23 2020 Martin Kolman <mkolman@redhat.com> - 34.10-1
- Move the code for the kernel package selection to new functions (vponcova)
- Remove the support for PAE (vponcova)
- Move Timezone module tests to a directory (vslavik)
- Move Subscription module tests to a directory (vslavik)
- Move Boss module tests to a directory (vslavik)
- Move common module tests to a directory (vslavik)
- Add directory for module tests (vslavik)
- Move UI tests to a directory (vslavik)
- Move core tests to directory (vslavik)
- Do not exclude English from available languages (vslavik)
- Add ELN support (sgallagh)
- Fix testing target branch instead of PR branch (jkonecny)
- Remove the old support for the requirements (vponcova)
- Move the code for the requirements of the DBus modules to the Boss module
(vponcova)
- Move the requirements for FIPS to the Security module (vponcova)
- Move the code for the driver disk requirements to a new function (vponcova)
- Move the code for platform requirements to a new function (vponcova)
- Move the code for language requirements to new functions (vponcova)
- Remove the support for language groups (vponcova)
- Use constants for the types of requirements (vponcova)
- Move constants to prevent circular dependency (vslavik)
- Hardening of our GH action event trigger (jkonecny)
- network: handle None values of team configuration correctly (rvykydal)
- Verify RPM exists before running it (vslavik)
- Relabel the anaconda logs after copying them to the installed system
(jstodola)
- post-scripts need to be sorted (honza.stodola)
- Fix ci-tasks container shell instructions (mpitt)
- Collect pylint and nosetests logs in validate workflow (mpitt)
- Clean up s390 partitioning check (#1855724) (vslavik)
- Show test-suite.log in validate workflow on failure (mpitt)
- More aggressive pylint downscaling (mpitt)
- Fix pylint downscaling (mpitt)
- fix “0 storage devices selected”abnormality (69908158+xqrustc2020)
* Wed Oct 14 2020 Martin Kolman <mkolman@redhat.com> - 34.9-1
- Add link to metacity enums schema (mpitt)
- Fix local tests run inside of container (jkonecny)
- Clean up the live image payload module (vponcova)
- Calculate required space from sources (vponcova)
- Provide the set-up and tear-down tasks of the live image source (vponcova)
- Use sources in the live image payload (vponcova)
- Create a DBus structure for the live image (vponcova)
- Create a basic file structure for the live image source (vponcova)
- Restrict pylint parallelism to available RAM (mpitt)
- Fix crash on nonexisting network config directories (mpitt)
- Allow running tests with docker (mpitt)
- Clean up container build/run rules and variables (mpitt)
- Robustify GitHub actions runner download in ci-tasks container (mpitt)
- Add variable for extra labels to GitHub action runner entry point (mpitt)
- Don't stop unit tests when the tests failed (jkonecny)
- Document possibility to run container tests without autotools (jkonecny)
- Make it possible to call make -f Makefile.am (jkonecny)
- Don't ignore the timezone kickstart command in the tests (vponcova)
- Run validate workflow in ci-tasks container (mpitt)
- Fix SECTION headers in docstrings (mpitt)
- Add GitHub actions runner to ci-tasks container (martin)
- Make it easier to run make commands (jkonecny)
- Remove support for the nfsiso: pseudo-protocol (vslavik)
- Fix formatting of contribution guidelines document (jkonecny)
- Fix missing space in Makefile (jkonecny)
- Add more options how to start the tests container (jkonecny)
- Fix dependency_solver to not require spec file for pip dependencies
(jkonecny)
- Add container workflow to tests README file (jkonecny)
- Add Makefile target to run tests in container (jkonecny)
- Add Makefile target to build container (jkonecny)
- Add Dockerfile for anaconda unit-tests (jkonecny)
- Allow to format selected DASDs (vponcova)
- Test for wrong spellings of OSTree (vslavik)
- network: remove function that is not used anymore (rvykydal)
- network: do not create ifcfg files in initramfs (rvykydal)
- network: handle special binding for ifname= also when updating a connection
(rvykydal)
- network: update comments in method for dumping default connections (rvykydal)
- network: update apply kickstart for everything applied in stage2 (rvykydal)
- network: remove task for consolidating of initramfs connections (rvykydal)
- network: remove task for setting real ONBOOT values (rvykydal)
- Run rpm tests in a GitHub action (martin)
- Separate RPM installability test from rpm_tests (martin)
- Define make targets for building source and binary rpms (martin)
- Drop superfluous build in `make run-rpm-tests-only` (martin)
- Fix spelling/name of OSTree (vslavik)
- Remove the inst.singlelang boot option (vslavik)
- Set up proxy environmental variables with a function (vponcova)
- Show in the first screen only translated locales (vslavik)
- Run unit tests in a GitHub action (martin)
- Mark the ostreesetup kickstart command as useless (vponcova)
- Use the RPM OSTree module in the UI (vponcova)
- Implement SetUpSourcesWithTask and TearDownSourcesWithTask (vponcova)
- Finalize the code that sets up and tear downs the RPM OS Tree source
(vponcova)
- Improve the string representation of the RPM OSTree source (vponcova)
- Implement network_required of the RPM OSTree source (vponcova)
- Mock system operations in MountFilesystemsTask task (martin)
- Add missing "rpm-build" test dependency (martin)
- Add missing "make" BuildRequires (martin)
- Fix mock installation/usage instructions (martin)
- Fix nosetests name in tests/README.rst (martin)
- Fix tests/README.rst syntax (martin)
- Stop passing rd.{dm,md,lvm,luks}=0 in installer environment (awilliam)
* Thu Oct 01 2020 Martin Kolman <mkolman@redhat.com> - 34.8-1
- fix remove unkown partition in sda failed (69908158+xqrustc2020)
- Fix show missing inst. prefix warning appropriately (#1875561) (jkonecny)
- Fix unit test dependency installation for boolean expressions (martin)
- Drop obsolete Py_Initialize link check in configure (martin)
- Document the mount points of the target system (vponcova)
- fix remove unkown partition in sda failed (69908158+xqrustc2020)
- Import RPM certificates at end of installation (vslavik)
* Tue Sep 29 2020 Martin Kolman <mkolman@redhat.com> - 34.7-1
- Remove the Packages module (vponcova)
- Handle the %packages section in the DNF module (vponcova)
- Create the DBus property Packages (vponcova)
- Create the DBus structure for the packages configuration (vponcova)
- network: commit changes synchronously when dumping autoconnections (rvykydal)
- Run the user instance of systemd (vponcova)
- network: do not bind virtual devices to mac (rvykydal)
* Fri Sep 25 2020 Martin Kolman <mkolman@redhat.com> - 34.6-1
- network: split add_and_activate_connection_sync function (rvykydal)
- network: add support for bridged bond to stage 2 kickstart (%pre) (rvykydal)
- Never mount partitions on a disk with the iso9660 filesystem (vponcova)
- packit: use tar-pax instead of tar-ustar (ttomecek)
- Change default Packit jobs (#1697339) (jkonecny)
- Enable Packit for Anaconda (#1697339) (jkonecny)
- Change text on the Reset All button in custom part. (vslavik)
- Add a rule for translated strings to code conventions (#1619530) (vponcova)
- Never convert translated strings to uppercase (vponcova)
- Never change first letters of translated strings to uppercase (vponcova)
- network: update docstring of clone_connection_async (rvykydal)
- network: add support for vlan over bond to stage 2 kickstart (pre) (rvykydal)
- Move the execute method of the logging command (vponcova)
* Thu Sep 17 2020 Martin Kolman <mkolman@redhat.com> - 34.5-1
- Fix the combo box for an URL type of additional repositories (#1879127)
(vponcova)
- Add DBus support for the ostreesetup kickstart command (vponcova)
- Create the structure for RPM OSTree configuration (vponcova)
- Create the RPM OSTree source module (vponcova)
- Create the RPM OSTree module (vponcova)
- network: clone connections from intramfs to persistent config (rvykydal)
- network: set addr-gen-mode of Anaconda default connections to eui64
(rvykydal)
- network: default to addr-gen-mode eui64 (rvykydal)
- network: do not reset ipv6.addr-gen-mode in tui network configuration
(rvykydal)
- network: get hwadddr when binding to mac more robustly (rvykydal)
- Improve the error dialog for storage reset (vponcova)
- Remove the needs_storage_configuration property (vponcova)
- Remove the is_hmc_enabled property (vponcova)
- Remove the install_device attribute (vponcova)
- Move the proxy property to the base payload class (vponcova)
- Fix CDN button visibility (mkolman)
- subscription: Assure payload restart on DVD install after registration
(mkolman)
- Remove the handles_bootloader_configuration property (vponcova)
- Run the CreateBLSEntriesTask task (vponcova)
- Add the CreateBLSEntriesTask task (vponcova)
- Call the DBus method InstallBootloaderWithTasks (vponcova)
- Add the CreateRescueImagesTask task (vponcova)
- Call the DBus method GenerateInitramfsWithTasks (vponcova)
- Add the RecreateInitrdsTask task (vponcova)
- network: set addr-gen-mode of Anaconda default connections to eui64
(rvykydal)
- network: default to addr-gen-mode eui64 (rvykydal)
- network: do not reset ipv6.addr-gen-mode in tui network configuration
(rvykydal)
- network: get hwadddr when binding to mac more robustly (rvykydal)
- subscription: Only restart payload when needed (mkolman)
- Document the restart_payload argument of subscription helper functions
(mkolman)
- network: fix missing log message argument (rvykydal)
- Propagate verify_ssl to RHSM (mkolman)
- Check if original partitions are mounted, too (vslavik)
- network: do not add superfluous quotes to inst.dhcpclass identifier
(rvykydal)
- Add the DBus method IsDeviceShrinkable (#1875677) (vponcova)
- Show warning message when entered size is not valid (vslavik)
- Extend unit tests for generate_device_factory_request (vponcova)
- Differentiate between RAID levels of a device and its container (vponcova)
- Don't generate container data for non-container device types (vponcova)
- network: fix parsing of hostname from ip= if mac is defined in dhcp
(rvykydal)
- network: fix inst.dhcpclass boot option (rvykydal)
- Do not push pot files just tell user that he should update (jkonecny)
- Add support for booting installation media with plain SquashFS (bkhomuts)
- Do not check ro mount in Dracut for overlay (jkonecny)
- network: apply kickstart network --nodefroute also from stage2 (rvykydal)
- list major common keyboard layouts first (suanand)
* Mon Sep 07 2020 Martin Kolman <mkolman@redhat.com> - 34.4-1
- Apply onboot policy even when network was configured in UI. (rvykydal)
- network: fix kickstart network --dhcpclass option (rvykydal)
- network: use constants instead of enum to hold stirng values of connection
type (rvykydal)
- network: fix using of values of NMConnectionType enum (rvykydal)
- Always clear treeinfo metadata (#1872056) (jkonecny)
- Do not check ro mount in Dracut for overlay (jkonecny)
- Propagate a lazy proxy of the storage model (vponcova)
- Add TODO to check if biospart support is required for DUD (jkonecny)
- Remove failure messages about not supported biospart (jkonecny)
- Switch to a new HardDrive command version with removed biospart (jkonecny)
- Make custom storage summary dialog resizeable (1626555) (mkolman)
- network: add constants for NM connection types (rvykydal)
- Recognize systemd.unit=anaconda.target in anaconda-generator (m.novosyolov)
- The underline character should not be displayed (honza.stodola)
- network: create default connection also for slave devices (rvykydal)
- network: remove ONBOOT hack for slave connections (rvykydal)
- network: replace ifcfg module with config_file module (rvykydal)
- network: remove unused functions from ifcfg module (rvykydal)
- network: generate kickstart via NM API (connections) (rvykydal)
- network: get master slaves via NM API (rvykydal)
- network: use NM API to look for config files for DeviceConfigurations
(rvykydal)
- network: use NM API to look for config files when setting final ONBOOT
(rvykydal)
- network: use NM API to look for config files when setting real ONBOOT
(rvykydal)
- network: use NM API to look for config files when applying kickstart
(rvykydal)
- network: use NM API to look for config files when consolidating connections
(rvykydal)
- network: check for missing device config via NM api (rvykydal)
- network: use underscore in the names of slave devices created from kickstart
(rvykydal)
- network: log also content of keyfiles (rvykydal)
- We won't support inst.ks=bd: (jkonecny)
- network: do not enforce network standalone spoke on default source (rvykydal)
* Tue Sep 01 2020 Martin Kolman <mkolman@redhat.com> - 34.3-1
- Move slower part of Subscription spoke initialization to a thread (mkolman)
- Add test to detect every RW mount command in Dracut (jkonecny)
- subscription: Convert the RHSM default config values to expected format
(mkolman)
- Implement get_source_proxy() in payload base class (mkolman)
- Use spec file macros for all requires version specifications (jkonecny)
- Fix spec macro for version name (jkonecny)
- Correctly work with package boolean logic in our setup scripts (jkonecny)
- Wait for payload initialization to finish in Subscription spoke (mkolman)
- Unify usage of BootLoaderArguments add() & update() (vslavik)
- Rename Arguments to BootLoaderArguments (vslavik)
- Remove usage of OrderedSet (vslavik)
- Add tests for the boot loader Arguments class (vslavik)
- Do not mount as RW in Dracut (jkonecny)
- network: do not crash when updating a connection without wired settings
(rvykydal)
- Fix traceback when removing additional repository (jkonecny)
- subscription: Handle cases where CDN should not be the default (mkolman)
- subscription: Set DNF payload source via config file option (mkolman)
- subscription: Manual CDN selection support (mkolman)
- subscription: Handle source switching at registration/unregistration
(mkolman)
- subscription: Introduce the default_source configuration option (mkolman)
- Use "raise from" to link exceptions (vslavik)
- Fix branching documentation (mkolman)
- Change keyboard ordering to US layout first, 'native' second. Resolves:
rhbz#1039185 (suanand)
- Remove docs where we tell users that inst. prefix is not required (jkonecny)
- Print warning for boot options without inst. prefix (jkonecny)
- Add missing dracut commands as missing inst. prefix warning (jkonecny)
- Enable warning when inst. prefix is not used (jkonecny)
- Reset the state of the custom partitioning spoke (vponcova)
- Reset the RAID level of the device request (#1828092) (vponcova)
- Protect all devices with the iso9660 file system (vponcova)
- Don't ignore NVDIMM devices with the iso9660 file system (vponcova)
- Add tests for the DBus method FindOpticalMedia (vponcova)
- Fix everything in payload should be mounted as read only (jkonecny)
- Add support for mount options to device_tree.MountDevice (jkonecny)
- Adapt tests for CDRom for the new inst.stage2 discovery (jkonecny)
- CDRom source should prioritize stage2 device during discover (jkonecny)
* Fri Aug 21 2020 Martin Kolman <mkolman@redhat.com> - 34.2-1
- Fix dependency_solver failure with spec file boolean logic syntax (jkonecny)
- Avoid unnecessarily pulling in glibc-langpack-en (sgallagh)
- Set up the ignored_device_names variable (vponcova)
* Thu Aug 20 2020 Martin Kolman <mkolman@redhat.com> - 34.1-1
- network: do not try to activate connection that has not been found (rvykydal)
- network: add timeout for synchronous activation of a connection (rvykydal)
- network: fix configuration of virtual devices by boot options (rvykydal)
- Handle exceptions from threads without new instances (vslavik)
- Do not use disabled --install-scripts command of pip (jkonecny)
- Use bootlist command to update the PowerPC-64 Boot Order (javierm)
- Discard current boot list when updating the boot-device NRVAM variable
(javierm)
- Automatically break lines in labels in software selection spoke (vslavik)
- Set up FIPS in the target system (vponcova)
- Update the service anaconda-sshd (vponcova)
- Set up FIPS in the installation environment (vponcova)
- Add Blivet version to generated kickstart (vslavik)
- Add Anaconda version to saved kickstart (vslavik)
- Fix kickstart file error with user groups (kai.kang)
- Get rid of add_disable_repo (jkonecny)
- Move parts together in the DNF repo (jkonecny)
- Fix issue that treeinfo repositories were never disabled (jkonecny)
- Keep treeinfo repositories disabled after payload reset (jkonecny)
- Fix crash on first entering of source spoke (jkonecny)
- Remove treeinfo repositories instead of disabling (jkonecny)
- Reload treeinfo repositories on every payload reset (jkonecny)
* Mon Aug 10 2020 Martin Kolman <mkolman@redhat.com> - 33.25-1
- Fix our tests with a newer rpmfluff library (jkonecny)
- network: pass also keyfile NM configuration to target system (#1858439)
(rvykydal)
- Unify the indentation in the Anaconda configuration files (vponcova)
- Remove the DBus method ConfigureNTPServiceEnablementWithTask (vponcova)
- Create ssh user using only existing fields (#1860058) (vslavik)
- Fix the position of the info bar in standalone spokes (vponcova)
- Add the function is_service_installed (vponcova)
- Drop the dependency on python3-ntplib (vponcova)
- Remove Blivet's tests (vponcova)
- Remove gui tests (vponcova)
- Generate the coverage report for tests (vponcova)
- Fix the util tests (vponcova)
- Simplify the regex tests (vponcova)
- Fix the module tests (vponcova)
- Clean up the driver tests (vponcova)
- Fix the kickstart dispatcher tests (vponcova)
- Fix the localization tests (vponcova)
- drop workarounds for the TLS exhaustion issue on aarch64 and ppc64le (dan)
* Fri Jul 31 2020 Martin Kolman <mkolman@redhat.com> - 33.24-1
- Run actions of the Resize dialog in the reversed order (#1856496) (vponcova)
- Reset repositories from the main thread (vponcova)
- Initialize the closest mirror from the main thread (vponcova)
- Remove the mirrors_available property (vponcova)
- Rename ActivateFilesystemsTask (vponcova)
- Document the Anaconda configuration files (vponcova)
- Remove the encrypted attribute (vponcova)
- subscription: Fix rhsm --proxy kickstart command usage with no username
specified (mkolman)
- subscription: Fix RHSM HTTP proxy configuration crash in the GUI (mkolman)
- Log the information about the original exception (vponcova)
- Update the documentation of the Anaconda sysconfig file (vponcova)
- Make spoke tiles stack more tightly (vslavik)
- Add NTS support to time sources in GUI (mlichvar)
- Add connection test for NTS (mlichvar)
- Parse NTP server options from config file (mlichvar)
- Run bash instead of sh in rescue mode (vslavik)
* Thu Jul 16 2020 Martin Kolman <mkolman@redhat.com> - 33.23-1
- Mangle Fedora IoT Edition product identifier to "Fedora-IoT" (ngompa13)
- Fix creating cached LVs on encrypted PVs (vtrefny)
- Add Fedora IoT product override (ngompa13)
* Tue Jul 14 2020 Martin Kolman <mkolman@redhat.com> - 33.22-1
- Add support for the timesource kickstart command (vponcova)
- Use the structure for time sources in GUI (vponcova)
- Use the structure for time sources in TUI (vponcova)
- Add support for generating a summary of the NTP servers (vponcova)
- Add support for the NTP server status cache (vponcova)
- Use the structure for time sources in network.py (vponcova)
- Use the structure for time sources in anaconda.py (vponcova)
- Use the structure for time sources in the Timezone module (vponcova)
- Use the structure for time sources in ntp.py (vponcova)
- Create a new DBus structure for time sources (vponcova)
- Replace the zram service (vponcova)
- Fix software spoke message when source changes (mkolman)
- ostree: set rootflags when installing on btrfs (#1753485) (dcavalca)
- Only pass one initrd image to kexec (javierm)
- Prevent crash on unregistration (mkolman)
- Add LVM with inconsistent sector size disks to common bugs (jkonecny)
- Don't create swap by default (vponcova)
- Don't require fcoe-utils (vponcova)
- Temporarily ignore the new timezone kickstart command (vponcova)
- Schedule timed actions with the right selector (#1851647) (vponcova)
- Reconfigure DNF payload after options are set (vslavik)
- Fix displaying of empty software group description (rvykydal)
- Fix passing of arguments when creating dracut arguments for FCoE (rvykydal)
- network: fix obtaining of s390 options of a wired connection (rvykydal)
- Exclude stderr from returned output when executing powerpc-utils tools
(javierm)
- Fix imports of Blivet-GUI in unit tests (vponcova)
- Don't mount DBus sources at /run/install/source (vponcova)
- Always specify the boot disk (vponcova)
- Create the initial storage model during the initialization (vponcova)
- Use LUKSDevice.raw_device instead of LUKSDevice.slave (vtrefny)
- Use modinfo to check ko before modprobe (t.feng94)
- Fix EFI bootloader install (#1575957) (butirsky)
* Wed Jul 08 2020 Martin Kolman <mkolman@redhat.com> - 33.21-1
- Use Btrfs for all Fedora variants installed by Anaconda except Server
(ngompa13)
- Remove the support for language filtering (vponcova)
- Remove the support for locale filtering (vponcova)
- Don't override the eula command with the same command (vponcova)
- Improve logs for validation of stage1 and stage2 devices (vponcova)
- Document an issue with invalid partitioning in the output kickstart file
(vponcova)
- Remove support for check_supported_locales (vponcova)
- Remove the support for Fedora Atomic Host (vponcova)
- Move Subscription spoke under Software (vslavik)
- Update the function get_default_partitioning (vponcova)
- Update the property default_partitioning (vponcova)
- Change the default_partitioning option (vponcova)
- Fix hiding of network device activation switch (#1847493) (rvykydal)
- Typo fix (sh.yaron)
* Mon Jun 22 2020 Martin Kolman <mkolman@redhat.com> - 33.20-1
- Add test for NFS URL with ISO in path (#1848718) (jkonecny)
- Fix issue when NFS path is pointing directly to ISO (#1848718) (jkonecny)
- Rename function for a simple check for DNF repository (jkonecny)
- Add tests for verify_valid_installtree function (#1844287) (jkonecny)
- Move verify_valid_installtree to source module utils (#1844287) (jkonecny)
- Do not test if repo is valid based on .treeinfo file (#1844287) (jkonecny)
- Relabel whole /etc instead of only some parts (vslavik)
- Clean up lists of files and directories to relabel (vslavik)
- Use allowlist and blocklist in the Anaconda configuration file (vponcova)
- Correctly set up the LUKS version when we click on a mount point (#1689699)
(vponcova)
- Fix the mock function for DBus.get_proxy (vponcova)
- Fix the mock function for DBus.get_proxy (vponcova)
- Simplify the workaround for the RHSM configuration proxy (vponcova)
- Show pylint version in logs (vslavik)
- Don't use the private attribute for a message bus (vponcova)
- Ignore unknown variable (vslavik)
- Split storage spoke dialogs to a separate module (vslavik)
- Fix more SElinux contexts (vslavik)
- Fix regression reading kernel list when collecting configurations (#1846156)
(jkonecny)
* Mon Jun 15 2020 Martin Kolman <mkolman@redhat.com> - 33.19-1
- Document common issues and bugs (vponcova)
- Add logging messages to %post scripts (vslavik)
- Don't prompt the user to ssh in VNC installations (vponcova)
- Extend the function prompt_for_ssh (vponcova)
- Allow having /boot on a btrfs volume (i.gnatenko.brain)
- network: do not parse IPADDR0 anymore (rvykydal)
- Do not use kwargs when creating network_data from ifcfg file (rvykydal)
- Extend unit tests for generating network data from ifcfg file (rvykydal)
- Fix updating of user gid/uid value checkbox in gui (rvykydal)
- Fix crash on user uid/gid unchecked in gui (rvykydal)
- Add daily build status badge (jkonecny)
- Fix the pylint warning in the Payloads module (vponcova)
- Add pointer to kickstart tests to tests README (rvykydal)
- resolved a user created password verification issue that could not exit
(57519382+huzunhao)
- Don't use data.method.proxy (vponcova)
- Use sshd_config drop in directory to allow root login (jjelen)
- localization: do not crash on failed parsing of X layout (#1836047)
(rvykydal)
- Catch Blivet's exceptions when we reset a device (#1843278) (vponcova)
- Fix wireless network configuration on get_ssid() returning None (#1838357)
(rvykydal)
- Unify definition of directory for ifname and prefixdevname config (rvykydal)
- Use constants when mocking paths for network installation test (rvykydal)
- Create /etc/systemd/network dir for ifname= renaming if needed. (rvykydal)
- Use the Blivet's property is_empty (vponcova)
* Wed Jun 03 2020 Martin Kolman <mkolman@redhat.com> - 33.18-1
- Set up LD_PRELOAD for the Payloads module (vponcova)
- Extend the start-module script (vponcova)
- subscription: Fix authentication method switching in GUI (mkolman)
- subscription: Make sure CDN repos are loaded and usable (mkolman)
- Add NFS ISO support back to the NFS SetupSourceTask (jkonecny)
- Add NFS ISO support to the NFSSourceModule (jkonecny)
- Tear down HDD device mount if no valid installation source is found
(jkonecny)
- Extract ISO find algorith from harddrive (jkonecny)
* Mon Jun 01 2020 Martin Kolman <mkolman@redhat.com> - 33.17-1
- Update required ack in makebumpver script for rhel > 7 (rvykydal)
- Close responses from session.get (vponcova)
- Improve the documentation of the SetUpMountTask class (vponcova)
- Raise an exception if the source's mount point is not unmounted (vponcova)
- Change the default source to CDROM (vponcova)
- Don't set up sources in the refresh method of the Source spoke (vponcova)
- Make cppcheck ignore the G_DEFINE_TYPE macros (vslavik)
- Fix issue that unified ISO from URL is not loaded (jkonecny)
- Add split_protocol payload helper function (jkonecny)
- Fix string based on translator comments (vslavik)
* Mon May 25 2020 Martin Kolman <mkolman@redhat.com> - 33.16-1
- subscription: Only require Insights package if subscribed (mkolman)
- subscription: Do not pass payload to unregister() helper function (mkolman)
- subscription: Fix typos related to ParseAttachedSubscriptions task (mkolman)
- subscription: Make sure /etc/yum.repos.d exists (mkolman)
- subscription: Fix disconnect() for RHSM observer (mkolman)
- subscription: Fix SystemPurposeData equality checking (mkolman)
- subscription: Set RHSM configuration before registration attempt (mkolman)
- subscription: Initial CDN source switching (mkolman)
- subscription: Fix Insights configuration in GUI (mkolman)
- subscription: Fix setting username to SubscriptionRequest in GUI (mkolman)
- Change connection flags for the RHSM private bus (vponcova)
- Create a proxy of the RHSM Config object for a specific interface (vponcova)
- Skip the btrfs command if deprecated (vponcova)
- Use a specific kickstart version in handle-sshpw (vponcova)
- Avoid concatenation of iso name twice (jkonecny)
- Do not mount harddrive sources as RO (jkonecny)
- Fix the access to a DBus proxy of the Subscription module (vponcova)
- Set up LANG for tests (vponcova)
- Resolve traceback when HDD ISO is not found (jkonecny)
- Don't set up the HMC source again (vponcova)
- Remove the changed property of the Source spoke in GUI (vponcova)
- Specify the default source type for the DNF payload (vponcova)
- Support all source types based on repo files (vponcova)
- Use the closest mirror source in UI (vponcova)
- Add a new source for the closest mirror (vponcova)
- Change the description of the repo files source (vponcova)
- Fix adding to the protected devices list (jkonecny)
- Remove not used API of dnf payload (jkonecny)
- Rename GetISOPath to GetIsoPath which is correct API name (jkonecny)
- Fix python3 requires in spec file (rvykydal)
- Use the source proxy to get the device name (vponcova)
- Collect package requirements of the Subscription module (vponcova)
- Add ignored field to rpm_tests (rvykydal)
- Require subscription manager on rhel (rvykydal)
- Remove the property is_iso_mounted (vponcova)
- Run the set-up tasks of sources with signals enabled (vponcova)
- Set default url type combobox value (jkonecny)
- Fix lang_locale_handler have payload property from parents (jkonecny)
- Remove kickstart sources from GUI (vponcova)
- Remove kickstart sources from TUI (vponcova)
- Log the result of the HDD set-up task (vponcova)
- Always try to unmount the HDD ISO (vponcova)
- Fix typo resulting to use mirrorlist instead of metalink (jkonecny)
- Handle DBus errors of the task returned by SetUpSourcesWithTask (vponcova)
- Remove useless attributes from the class Anaconda (vponcova)
- Remove kickstart sources from anaconda.py (vponcova)
- Remove kickstart sources from the class DNFPayload (vponcova)
- Call nose python module instead of nosetests binary (jkonecny)
- root spoke: set value of root ssh login checkbox from module (rvykydal)
- users module: fix check of existence of admin user (rvykydal)
- Always clear kickstarted status for GUI time&date spoke (vslavik)
- Always protect CD-ROM devices (vponcova)
- Fix the DBus task that sets up the SE/HMC source (vponcova)
- Move lxml test dependency from pip to RPM (jkonecny)
- subscription: Show data about attached subscriptions (mkolman)
- Setup RHEL rebuilds to exclude
org.fedoraproject.Anaconda.Modules.Subscription (riehecky)
- Tear down sources before setting new one in SourceSwitchHandler (jkonecny)
- Remove unused properties from SourceSwitchHandler (jkonecny)
- Migrate set Closest mirror of SourceSwitchHandler (jkonecny)
- Migrate set HMC of SourceSwitchHandler to source modules (jkonecny)
- Migrate set CDROM of SourceSwitchHandler to source modules (jkonecny)
- Migrate set NFS of SourceSwitchHandler to source modules (jkonecny)
- Migrate set URL of SourceSwitchhandler to source modules (jkonecny)
- Implement the DBus methods SetUpSourcesWithTask and TearDownSourcesWithTask
(vponcova)
- Move removal of blivet-gui in rhel upstream (rvykydal)
- Migrate set HDD of SourceSwitchHandler to source modules (jkonecny)
- Migrate SourceSwitchHandler to use module for cleanups (jkonecny)
- Add payload property to SourceSwitchHandler (jkonecny)
- Avoid imports from blivet.devicefactory (vponcova)
- Mark kickstart commands of RPM sources as useless (vponcova)
- Generate kickstart from the Payloads module (vponcova)
* Tue May 19 2020 Martin Kolman <mkolman@redhat.com> - 33.15-1
- Update the bootloader configuration after live installation (javierm)
- subscription: Registration button sensitivity handling (mkolman)
- subscription: Make credential checking functions usable in GUI (mkolman)
- Add exclude to the dependency_solver (jkonecny)
- Add the method is_complete to the class DNFPayload (vponcova)
- Add the property source_type to the class DNFPayload (vponcova)
- Add the method get_source_proxy to the class DNFPayload (vponcova)
- Fix call to super() with missing parameters (vslavik)
- Change string according to translator comments (vslavik)
- Remove gjs dependency exclude which is no more needed with anaconda-live
(rvykydal)
- Remove sphinx test dependency (jkonecny)
- Extend the objects for parsing the cmdline installation method (vponcova)
- Add functions to set up and tear down of DBus sources (vponcova)
- Switch call of pip3 to python3 -m pip (jkonecny)
- Move for_publication as second method in sources (jkonecny)
- Move sources private methods on top of the file (jkonecny)
- Fix RPMSourceMixin class documentation (jkonecny)
- Switch MountingSourceBase to MountingSourceMixin (jkonecny)
- Remove tear_down_with_tasks from MountingSourceBase (jkonecny)
- Do not implement get_state in MountingSourceBase (jkonecny)
- Change gui test relative imports to absolute (vslavik)
- Disable spurious pylint warning (vslavik)
- Add CDN source (vslavik)
- Test the DBus method IsNetworkRequired (vponcova)
- Add the DBus method IsNetworkRequired (vponcova)
- Detect HTTPS as a protocol that requires the network (michel)
- Remove unused variable (vslavik)
* Thu May 14 2020 Martin Kolman <mkolman@redhat.com> - 33.14-1
- subscription: Hook up state update methods (mkolman)
- subscription: Make it possible to register/unregister from the GUI (mkolman)
- subscription: Register & subscribe during automated installation (mkolman)
- subscription: Add asynchronous registration helper functions (mkolman)
- subscription: Add IsRegistered property (mkolman)
- Add functions for DBus sources (vponcova)
- Implement DeviceName API for CDrom payload source (jkonecny)
- Return device name from SetUpCdromSourceTask (jkonecny)
- Add GetISOPath HardDrive payload source API (jkonecny)
- subscription: Add the ParseAttachedSubscriptionsTask (mkolman)
- Add new Hard drive source property to tell that iso is used (jkonecny)
- Change return of SetUpHardDriveSourceTask (jkonecny)
- Add __repr__ to payload sources (vslavik)
- Create a DBus proxy of the DNF module (vponcova)
- Work around pylint 2.5.0 issue with _ in warning id (vslavik)
- subscription: Add network connectivity check to the Subscription spoke
(mkolman)
- Split find_and_mount_iso_image source helper func (jkonecny)
- subscription: Add main Subscription spoke structure (mkolman)
- Add the DBus method ActivatePayload (vponcova)
- Add the DBus property CreatedPayloads (vponcova)
- Replace the DBus method GetActivePayload with a property (vponcova)
- subscription: Add helper functions for Subscription spoke (mkolman)
- Remove the DBus method IsPayloadSet (vponcova)
- subscription: Add glade file for Subscription spoke (mkolman)
- subscription: Simplify system purpose configuration (mkolman)
- subscription: Implement equality testing for SystemPurposeData (mkolman)
- subscription: Add check_system_purpose_set() helper function (mkolman)
- Add generate_repo_configuration for URL payload source (jkonecny)
- Add gererate_repo_configuration for all mount sources (jkonecny)
- Add GetRepoConfigurations API for DNF payload (jkonecny)
- Create ABC class declaring interface for RPM sources (jkonecny)
- Add the combo box for choosing a LUKS version in the container dialog
(#1714120) (vponcova)
- Use the combo box for choosing a LUKS version only for encrypted devices
(vponcova)
- Provide the LUKS version of the encrypted container (vponcova)
- Add the function set_container_data (vponcova)
* Thu May 07 2020 Martin Kolman <mkolman@redhat.com> - 33.13-1
- Remove a missed use of has_source() to fix tests (vslavik)
- Change string to new format (vslavik)
- Add DBus property Description for all sources (vslavik)
- subscription: Add AttachedSubscription DBus structure (mkolman)
- Pre-select disk initialization mode in TUI (honza.stodola)
- Remove the HasSource D-Bus function (vslavik)
- Add kickstart support to URL payload source (jkonecny)
- Add NFS source kickstart support (jkonecny)
- Add function to create NFS from components (jkonecny)
- Move ProxyString to core.payload (jkonecny)
- Move parse_nfs_url to the new core/payload file (jkonecny)
- Fail on harddrive --biospart in HDD payload source (jkonecny)
- Add kickstart support for HDD payload source (jkonecny)
- Add SE/HMC payload source kickstart support (jkonecny)
- Add CDROM payload source kickstart support (jkonecny)
- Pick HMC as the last DNF source when processing KS data (jkonecny)
- Add DNF module kickstart processing for sources (jkonecny)
- subscription: Run installation tasks of the Subscription module (mkolman)
- subscription: Add is_module_available() utility function (mkolman)
- Ignore the required package dmraid in RHEL (honza.stodola)
- subscription: Attach subscription task (mkolman)
- subscription: Add unregistration task (mkolman)
- Activate the set/remove buttons in the "Select disks and boot loader" window
only when a disk is selected (honza.stodola)
- Properly update UI after removing the boot device (honza.stodola)
- Do not offer disk selection when encrypting existing partition
(honza.stodola)
- Destroy the disk selection dialog on escape (honza.stodola)
- Add the DBus method GetModules to the Boss service (vponcova)
- subscription: Fix registration tasks docstring typo (mkolman)
- Add payload source __repr__ support to improve logging (jkonecny)
- Fix calling payloads service with empty kickstart (jkonecny)
- Rename check_set_sources to set_and_check_sources (jkonecny)
- Create two parts of the set_check_sources payload test (jkonecny)
- Add payload base add_source() module scope API (jkonecny)
- Fix payload log message (jkonecny)
- Add new commands for DNF payload recognition (jkonecny)
- Disable %packages from DNF module (jkonecny)
- Add new supported sources to DNF payload (jkonecny)
- Add kickstart commands for DNF payload (jkonecny)
- Use new F33 Repo command from pykickstart (jkonecny)
- subscription: Add subscription related package requirements (mkolman)
- subscription: Add registration tasks (mkolman)
- subscription: Add RegistrationError exception (mkolman)
- network: don't try to use DeviceConfigurations on live cd (#1827999)
(rvykydal)
- subscription: Add TransferSubscriptionTokensTask (mkolman)
- subscription: Add RestoreRHSMLogLevelTask (mkolman)
* Wed Apr 29 2020 Martin Kolman <mkolman@redhat.com> - 33.12-1
- Add tests for ReadKickstart (vponcova)
- Remove pyanaconda.storage (vponcova)
- Move the initialization functions from pyanaconda.storage (vponcova)
- Move create_storage from pyanaconda.storage (vponcova)
- Move the model from pyanaconda.storage (vponcova)
- Move the utils from pyanaconda.storage (vponcova)
- Move the installation functions from pyanaconda.storage (vponcova)
- Move the storage checker from pyanaconda.storage (vponcova)
- Move pyanaconda.platform (vponcova)
- Move PartSpec from pyanaconda.storage (vponcova)
- Don't use pyanaconda.platform in UI (vponcova)
- Separate the "Reset All" button from the edge of the screen (honza.stodola)
- Fix the warning messages from ReadKickstart (vponcova)
- Unify module source test variable names (vslavik)
- Add resolv.conf to log-capture (riehecky)
- Reload NTP server list in dialog on every run (vslavik)
- Fix the line number in the kickstart message data (vponcova)
- Remove TODO to solve is_ready for payload sources (jkonecny)
- Use the new task class with the harddrive source (vslavik)
- Detect the live OS image automatically (vponcova)
- Add constants for the source types (vponcova)
- Exclude liveimg from the kickstart command method (vponcova)
- Access the kickstart command liveimg directly (vponcova)
- Create a base class for live payloads (vponcova)
- Remove pyanaconda.payload.livepayload (vponcova)
- Run %onerror and %traceback scripts for all types of exceptions (vponcova)
- gui source spoke: fix the key used to check proxy for additional repo
(rvykydal)
- Respect changesok password policy for root password (#1584145) (rvykydal)
- rootpw gui: make root spoke insensitive if rootpw is set in ks (#1584145)
(rvykydal)
- subscription: RHSM runtime configuration support (mkolman)
- Move the bootloader-related code to the module (vponcova)
- Add the is_ready method to the Payload class (vponcova)
- Rename NOT_SUPPORTED to NOT_APPLICABLE (jkonecny)
- subscription: Add missing declaration for rhsm_observer property (mkolman)
- subscription: Fixup a docstring (mkolman)
- Remove payload tests for empty sources (jkonecny)
- Improve HDD payload source test (jkonecny)
- Change tests for new payload ready states (jkonecny)
- Use new source states in payload sources (jkonecny)
- Create source state enum (jkonecny)
- date time gui: no empty space in combo for day and month selection (#1823130)
(rvykydal)
- Reset the partitioning of Blivet-GUI (#1826286) (vponcova)
- Remove the logic with sources from the network standalone spoke (vponcova)
- Move remaining DNF-related code to the DNF payload (vponcova)
- subscription: Add SystemPurposeConfigurationTask (mkolman)
- Rename payload source is_ready to get_state (jkonecny)
- Remove the tip about the user name (#1823015) (vponcova)
- Add payload base tests (jkonecny)
- Improve payload shared test source creation (jkonecny)
- Fix exception string when incompatible payload source (jkonecny)
- Translate names of OS installations on demand (#1823126) (vponcova)
- subscription: Add helper function to SystemPurposeData DBus structure
(mkolman)
- network tui: fix getting of network device configurations (#1823011)
(rvykydal)
* Tue Apr 21 2020 Martin Kolman <mkolman@redhat.com> - 33.11-1
- Reset the partitioning of Blivet-GUI (#1826286) (vponcova)
- Fix the validation of a device label (#1823221) (vponcova)
- Use the new base classes in sources (vslavik)
- Add base classes for mounting sources (vslavik)
- Add test if the spokes ordering is correct (jkonecny)
- Fix ordering of spokes with the same priority (jkonecny)
- Fix TUI Kernel and Unsupported HW spokes ordering (jkonecny)
- Switch collecting & ordering action classes to static (jkonecny)
- Add TUI/GUI tests for standalone spokes priority (jkonecny)
- Use join_paths instead of os.path.join in sources (vslavik)
- Get ui/__init__.py closer to pep8 (jkonecny)
- Allow to remove incomplete devices (#1823232) (vponcova)
- subscription: RHSMObserver & StartRHSMTask (mkolman)
- Make sure that the summary button is really hidden (#1823467) (vponcova)
- Use default priority in the GUI spokes (jkonecny)
- Fix TUI spokes priorities (jkonecny)
- Add back default priority for standalone spokes (jkonecny)
- subscription: Add initial RHSM DBus API identifiers (mkolman)
- Install scripts at /usr/bin (vponcova)
- Remove mock from the test dependencies (vponcova)
- Install test dependencies from pip when possible (vponcova)
- Fix the indentation of the test dependencies (vponcova)
- Expand the selector with swap (#1823127) (vponcova)
- Fix default value for pwpolicy emptyok (#1664704) (mkolman)
- Only quit GTK mainloop on GUI quit request (#1643111) (mkolman)
- Print correct message if no linux partitions were found in rescue mode
(#1823222) (honza.stodola)
- Use black color for errors in bottom bar (#1823004) (honza.stodola)
* Thu Apr 16 2020 Martin Kolman <mkolman@redhat.com> - 33.10-1
- subscription: Implement install_with_tasks() method (mkolman)
- subscription: Add the IsSubscriptionAttached property (mkolman)
- subscription: Add ConnectToInsights task (mkolman)
- Create product configuration files for Red Hat Virtualization (vponcova)
- Create the configuration section Storage Constraints (vponcova)
- Extend tests for the default storage checker (vponcova)
- Represent the constraint STORAGE_MIN_RAM by an instance of Size (vponcova)
- Remove the constraint STORAGE_MIN_ROOT (vponcova)
- Extend support for custom storage checking (vponcova)
- Add a new type of the default partitioning for virtualizations (vponcova)
- Add the configuration option default_scheme (vponcova)
- Add the configuration option help_directory (vponcova)
- Accept `harddrive --dir` without absolute paths (jkonecny)
- Make the kickstart support for the btrfs command optional (vponcova)
- Fix non-root dir of install tree HD installation (#1689194) (jkonecny)
- subscription: Add missing pieces for the Subscription DBus module (mkolman)
- Add UI support for the ZIPL Secure boot (vponcova)
- Add DBus support for the ZIPL Secure Boot (vponcova)
- Add code convention to prefer join_paths over os.path.join (jkonecny)
- Add helper function force_path_join (jkonecny)
- Fix get anaconda version test after test file rename (vponcova)
- Rename iutil_test to util_test (jkonecny)
* Wed Apr 08 2020 Martin Kolman <mkolman@redhat.com> - 33.9-1
- Fix bad import of general errors (jkonecny)
- Improve code convention code formatting (jkonecny)
* Wed Apr 08 2020 Martin Kolman <mkolman@redhat.com> - 33.8-1
- Fix the indentation of false positives (vponcova)
- Don't try to format FBA DASD devices (#1715303) (vponcova)
- Disable the SMT warning by default (vponcova)
- Detect and warn if SMT is enabled (#1684056) (vponcova)
- Use constants to check the type of the payload object (#1820418) (vponcova)
- Provide the DBus types of the payloads (vponcova)
- Add Harddrive (HDD, HDISO) source (vslavik)
- Add utility functions for sources (vslavik)
- subscription: SubscriptionRequest DBus structure (mkolman)
- Remove the abstraction for the event loop (vponcova)
- Upgrade findFirstIsoImage (vslavik)
- Make sure that all Anaconda's DBus errors are registered (vponcova)
- Remove the mapping to a DBus error for KickstartError (vponcova)
- Don't use the default error register (vponcova)
- Set new repo configuration after validation is done (jkonecny)
- Add packaging constrains to URL payload source (jkonecny)
- Add repo cost to the URL payload source (jkonecny)
- Add proxy url to URL payload source (jkonecny)
- Add ssl configuration structure to URL payload source (jkonecny)
- Add ssl verification flag to URL payload source (jkonecny)
- Add Name to the URL payload source (jkonecny)
- Add URL repo configuration to the url source (jkonecny)
- Add empty repository configuration DBus structure (jkonecny)
- Add install_repo_enabled flag to URL payload source (jkonecny)
- Add tests for set up and tear down for url source (jkonecny)
- Add is_ready tests for URL source module (jkonecny)
- Add simple tests for a new URL payload source (jkonecny)
- Add payload URL source base structure (jkonecny)
* Fri Apr 03 2020 Martin Kolman <mkolman@redhat.com> - 33.7-1
- Don't clear errors by expanding pages in the custom spoke (vponcova)
- Fix the permission for changing a mount point (#1818500) (vponcova)
- Allow to use an existing unlocked LUKS in one special case (#1772902)
(vponcova)
- Fix the encryption checkbox in the custom spoke (#1819360) (vponcova)
- Don't manually trigger a device encryption change (vponcova)
* Thu Apr 02 2020 Martin Kolman <mkolman@redhat.com> - 33.6-1
- Fix the test for complex data with secrets (vponcova)
- Update generate_request_description (vponcova)
- Add support for secrets in DBus structures (vponcova)
- Rename _test_dbus_property to _check_dbus_property (jkonecny)
- Fix text color on info bars (mkolman)
- Add NFS source (vslavik)
* Tue Mar 31 2020 Martin Kolman <mkolman@redhat.com> - 33.5-1
- Don't call the DBus method IsNodeFromIbft from the Storage module (#1817529)
(vponcova)
- Use the right partitioning method in the storage spoke (vponcova)
- Improve logging of storage spokes in GUI and TUI (vponcova)
- Don't log an empty string (vponcova)
- Handle translation of an empty string in widgets (#1815461) (vponcova)
- Replace lambda by partial (jkonecny)
- Implement updating changed Anaconda files in a mock (jkonecny)
- Add possibility to add/remove specific dir in mock (jkonecny)
- Remove prepare parameter disable when running tests (jkonecny)
- Add missing arguments from the main command check (jkonecny)
- Move check for required setup-mock commands (jkonecny)
- Simplify test calling in setup-mock-test-env script (jkonecny)
- storage gui: keep expanded mountpoints info on actions in UI by default
(#1210944) (rvykydal)
- Support updating Anaconda files in the mock (jkonecny)
- Handle invalid disk selection (vponcova)
- Set up advanced storage on the right device tree (#1812561) (vponcova)
- Remove storage tests (jkonecny)
- Use the right field of DiskStoreRow (#1816256) (vponcova)
- Add Repo files source (vslavik)
- Clean up and rename parseNfsUrl (vslavik)
- Do not show quarterly release part of the version in UI. (rvykydal)
- Add license to the __main__.py file for DBus modules (mkolman)
- Pass nosmt boot option to installed system (rvykydal)
- Adapt makebumpver to rhel-devel -> rhel-8 branch renaming. (rvykydal)
- Revert "Fix PR tests with mock version 2" (jkonecny)
- Remove the class PackagePayload (vponcova)
- Remove pyanaconda.payload.dnfpayload (vponcova)
- Improve help of dd_extract tool (jkonecny)
- Add missing period in iscsi login failure message. (rvykydal)
- Rename add-ons to additional software (#1674011) (rvykydal)
- Fix dd test RPM generation with binary files (jkonecny)
- Enable back skipped DD test (jkonecny)
- Fix translation of one nvdimm related GUI string (rvykydal)
- Fix memory leak in utils (yubihong)
- Fix code formatting of DUD tests (jkonecny)
- Fix dud test names (jkonecny)
- Small optimization in setup-mock-test-env script (jkonecny)
- Fix setup-test-env for other than pyanaconda tests (jkonecny)
- Create pyanaconda.payload.dnf (vponcova)
- Create pyanaconda.payload.__init__ (vponcova)
- Rename pyanaconda.payload.__init__ (vponcova)
- subscription: add system purpose support (mkolman)
- subscription: run Subscription module on RHEL (mkolman)
- subscription: add initial subscription module structure (mkolman)
- Wrap iscsi login error messages in GUI (#1811382) (rvykydal)
- Add tests for CD-ROM source (vslavik)
- Add CD-ROM source (vslavik)
- Add tests for the new utils file (vslavik)
- Move verifyMedia to sources as is_valid_install_disk (vslavik)
- Add the DBus module for SE/HMC (vponcova)
- Don't return anything from setup_kickstart (vponcova)
- Fix fd leak while fchmod failed (yubihong)
* Tue Mar 17 2020 Martin Kolman <mkolman@redhat.com> - 33.4-1
- Remove the configuration of the Blivet's logger (vponcova)
- Support logging of Anaconda DBus modules to files (#1812380) (vponcova)
- Fix a typo in s390 znet options configuration (rvykydal)
- Remove empty lines at the test source file (jkonecny)
- Source type is already tested by Interface (jkonecny)
- Remove the logging from the method process_kickstart (vponcova)
- Don't override the method generate_kickstart (vponcova)
- Show the help again (#1812896) (vponcova)
- gui: make description column of disk list resizable (#1530410) (rvykydal)
- gui: add tooltip to descriptions in disk list (#1530410) (rvykydal)
- gui: ellipsize description in disk list (#1530410) (rvykydal)
- Fix '\' is correctly forwarded by udev rules (jkonecny)
- Add debug print to dracut driver_updates (jkonecny)
- Escape spaces in dracut partition specifications (bcl)
- Rename the file with unit tests for the Payloads module (vponcova)
- Split the code for the source and payload factories (vponcova)
- Remove BaseFactory (vponcova)
- Simplify kickstart processing in the Payloads module (vponcova)
- Replace stat.ST_SIZE by .st_size (jkonecny)
- Module backport to better handling of sparse images (jkonecny)
- Avoid downloading payload image in set up phase (jkonecny)
- Add fallbacks for the source and payload factories (vponcova)
- Test the source and payload factories for all types (vponcova)
- Rename the file with unit tests for the Live OS module (vponcova)
- Test the LVM storage check. (vslavik)
- Verify that LVM destruction is orderly (vslavik)
- Don't set up the locale if none is selected (#1649956) (vponcova)
- network: fix crash during connections consolidation (#1811649) (rvykydal)
- Execute a kickstarted partitioning (#1811242) (vponcova)
- Remove extra quotes from the doc strings (vponcova)
- Remove unused code (vponcova)
- Remove dead dracut code (jkonecny)
- Set liveimg min_size to be x3 the real size (yturgema)
* Mon Mar 09 2020 Martin Kolman <mkolman@redhat.com> - 33.3-1
- Fix typos, comments and style in the storage-related code (vponcova)
- Don't add None values to a combo box (#1810679) (vponcova)
- Fix the unit tests for BTRFS (vponcova)
- Adjust documentation for new localization solution (jkonecny)
- Check pykickstart imports are correct in branching (jkonecny)
- Be able to disable correct branch in check-branching (jkonecny)
- Add check for branch setting (jkonecny)
- Add localization branch testing (jkonecny)
- Move functions to pyanaconda.core.storage (vponcova)
- Move functions to pyanaconda.ui.lib.storage (vponcova)
- Update action buttons only for the selected row (vponcova)
- Fix action buttons in the resize dialog (#1809950) (vponcova)
- Add branch specific configuration to a separate file (jkonecny)
- Always use the Anaconda's kickstart version (vponcova)
- Remove the Baz module (vponcova)
- Add small badges for Read the Docs and translations (vponcova)
- Remove the temporary workaround for StorageError (vponcova)
- Remove the error handler from the storage-related code (vponcova)
- Handle storage installation errors (vponcova)
- Remove the handler for FSTabTypeMismatchError (vponcova)
- Handle ZIPL errors as a bootloader installation error (vponcova)
- Remove the handler for NoDisksError (vponcova)
- Remove the handler for PartitioningError (vponcova)
- Handle the unusable storage module in UI (#1808650) (vponcova)
- Don't mention new-kernel-pkg anymore in /etc/sysconfig/kernel (rvykydal)
- Don't print warnings for new-kernel-pkg not being present (javierm)
- Handle the unusable storage module in the DBus Storage module (vponcova)
- network: add network module tests for installation tasks (rvykydal)
- Fix incorrect docstrings (vslavik)
- Use the latest kernel version list (#1807252) (vponcova)
- Check free space in the correct device tree (#1807339) (vponcova)
- Change log-capture script date to remove `:` symbol (jkonecny)
- Add missing logs to the log-capture utility (jkonecny)
* Tue Mar 03 2020 Martin Kolman <mkolman@redhat.com> - 33.2-1
- prefixdevname: add to unit tests (rvykydal)
- prefixdevname: pass persistent configuration to installed system (rvykydal)
- Add L10N dir constant to makefile (jkonecny)
- Remove auto-discover of git branch (jkonecny)
- Adapt Makefile to new L10N repository structure (jkonecny)
- prefixdevname: pass net.ifnames.prefix option to installed system (rvykydal)
- prefixdevname: install package to target system if needed (rvykydal)
- prefixdevname: import state from initramfs to stage 2 (rvykydal)
- Handle invalid optical install media (#1806520) (vponcova)
- Start live CD with explicit GUI (#1765650) (vslavik)
- network: fix GUI crash on invalid devices in the list (rvykydal)
- Add translation badge (vslavik)
- Remove -devel and -release for L10N repository (jkonecny)
- Use git url instead of http for pot files creation (jkonecny)
- Fix documentation changes in release.rst (jkonecny)
- Ignore the required package btrfs-progs in RHEL (vponcova)
* Mon Feb 24 2020 Martin Kolman <mkolman@redhat.com> - 33.1-1
- Fix the multiselection in the custom spoke (vponcova)
- Handle installation errors from DBus tasks (vponcova)
- Wait for entropy in the DBus Storage module (vponcova)
- Don't remove unknown devices (#1806233) (vponcova)
- Call GetFormatData instead of GetFormatTypeData (vponcova)
- Show progress messages from DBus tasks (vponcova)
- Report Blivet's messages during the storage installation (vponcova)
- Handle a failed bootloader installation (#1806103) (vponcova)
- Fix the exit handler (#1805916) (vponcova)
- Add DBus methods GetDeviceMountOptions and SetDeviceMountOptions (vponcova)
- Don't show the disk free space in bytes (vponcova)
- Fix the default disk selection (#1805553) (vponcova)
* Thu Feb 20 2020 Martin Kolman <mkolman@redhat.com> - 32.24-1
- Initialize disks in interactive and Blivet partitioning modules (vponcova)
- Fix the function get_device_partitions (vponcova)
- Fix the function unlock_device (vponcova)
- Apply extra arguments before the bootloader installation (vponcova)
- Remove configure_storage (vponcova)
- Remove the support for resetting the custom storage data (vponcova)
- Remove the support for on-disk snapshots of storage (vponcova)
- Remove collect_selected_disks (vponcova)
- Remove the local storage object from the custom spoke (vponcova)
- Remove the local storage object from the custom storage helpers (vponcova)
- Update the storage model of device tree modules (vponcova)
- Use the exception DeviceSetupError (vponcova)
- Change the task MountExistingSystemTask (vponcova)
- Change the task AddDeviceTask (vponcova)
- Extend the task ChangeDeviceTask (vponcova)
- Add the container specification to the device factory request (vponcova)
- Extend the DBus method ValidateContainerName (vponcova)
- Add the DBus method UpdateContainerData (vponcova)
- Add the DBus method GenerateContainerData (vponcova)
- Add the DBus method GenerateContainerName (vponcova)
- Add the method reset_container_data to the device factory request (vponcova)
- Add the DBus method GetContainerFreeSpace (vponcova)
- Add the DBus method CollectContainers (vponcova)
- Add permissions for changing the container (vponcova)
- Filter unsupported disklabel devices (vponcova)
- Add the DBus method IsDeviceEditable (vponcova)
- Add the DBus method CheckCompleteness (vponcova)
- Add the DBus method IsDeviceLocked (vponcova)
- Add a new permission for changing a list of disks (vponcova)
- Update the permission for the device encryption (vponcova)
- Add the DBus method ResetDevice (vponcova)
- Add the DBus method DestroyDevice (vponcova)
- Add the DBus method SchedulePartitionsWithTask (vponcova)
- Remove the local storage object from the accordion (vponcova)
- Remove the local storage object from the source spoke in GUI (vponcova)
- TUI: Use get_hdiso_source_description (vponcova)
- Remove the local storage object from the storage spoke (vponcova)
- Remove the local storage object from the advanced storage spoke (vponcova)
- Use the Blivet partitioning module in Blivet-GUI (vponcova)
- Remove the local storage object from the resize dialog (vponcova)
- Remove the local storage object from the action dialog (vponcova)
- Extend the class DeviceActionData (vponcova)
- Remove the local storage object from the selected disks dialog (vponcova)
- Remove the local storage object from the refresh dialog (vponcova)
- Remove the local storage object from dialogs for specialized disks (vponcova)
- Remove the local storage object from run_installation (vponcova)
- Remove the local storage object from FileSystemSpaceChecker (vponcova)
- TUI: Use create_partitioning (vponcova)
- TUI: Extend apply_disk_selection (vponcova)
- TUI: Simplify default disk selection in Storage spoke (vponcova)
- Move is_local_disk to pyanaconda.ui.lib (vponcova)
- Use apply_partitioning from pyanaconda.ui.lib (vponcova)
- Move try_populate_devicetree to pyanaconda.ui.lib (vponcova)
- Move the UI support for device protection to pyanaconda.ui.lib (vponcova)
- Move get_disks_summary to pyanaconda.ui.lib (vponcova)
- Move apply_disk_selection to pyanaconda.ui.lib (vponcova)
- Move the UI support for storage initizalization to pyanaconda.ui.lib
(vponcova)
- Remove the storage argument from the storage initialization (vponcova)
- Move the UI support for DASD formatting to pyanaconda.ui.lib (vponcova)
- Remove the storage and data arguments from DasdFormatting (vponcova)
- Add the function find_partitioning (vponcova)
- Remove the static partitioning modules (vponcova)
- Remove the Enabled property from the partitioning modules (vponcova)
- Mark storage kickstart commands as useless (vponcova)
- Remove the UI workaround for storage kickstart data (vponcova)
- Remove the UI code for the storage configuration (vponcova)
- Remove the local storage object from TUI (vponcova)
- Don't use the local storage object in storage utils (vponcova)
- Don't use the local storage object for the installation (vponcova)
- Don't use the local storage object for formatting DASDs from UI (vponcova)
- Remove automatic push of pot files during release (jkonecny)
- Remove zanata from release.rst (jkonecny)
- Remove deprecated translations.txt document (jkonecny)
- Update Readme link to translation project (jkonecny)
- Remove Zanata from translation canary (jkonecny)
- Remove zanata from setup test env scripts (jkonecny)
- Remove zanata from makebumpver (jkonecny)
- Remove zanata configuration file (jkonecny)
- Remove Zanata from po/Makefile (jkonecny)
- Remove zanata from Makefile (jkonecny)
- Remove unnecessary sed from configure.ac (jkonecny)
- Use l10n repository for pushing changed pot file (jkonecny)
- Pull po files from our l10n repo instead of Zanata (jkonecny)
- Offer only supported sector sizes in NVDIMM reconfiguration dialog (rvykydal)
- Fix PR tests with mock version 2 (jkonecny)
- Don't use the local storage object for the storage initialization (vponcova)
- Don't use device objects in the payload classes (vponcova)
- Remove the attribute for storage from the payload classes (vponcova)
- Don't use local storage objects in the image utils (vponcova)
- Don't use the local storage objects in the payload utils (vponcova)
- Run a DBus task to create the pre-installation snapshot (vponcova)
- Don't set up the local storage checker object (vponcova)
- Don't use the local storage object during the start of anaconda (vponcova)
- Remove the local storage object from the rescue mode (vponcova)
- Don't use the local storage object to initialize time (vponcova)
- Don't reset the local storage object (vponcova)
- Don't create the local storage object (vponcova)
- Don't modify the list of device names (vponcova)
* Thu Feb 13 2020 Martin Kolman <mkolman@redhat.com> - 32.23-1
- Test kickstart warnings from modules (vslavik)
- Use kickstart parsing warnings coming from boss (vslavik)
- Log kickstart warnings in modules (vslavik)
- Disable package download to / /tmp (#1781517) (jkonecny)
- Handle the variant in SetConstraint (vponcova)
- Handle the variant from GetResult (#1798392) (vponcova)
- Fix the function _del_xdg_runtime_dir (vponcova)
- Do not crash on adding fcoe device in gui when there are no nics (#1798402)
(rvykydal)
- Fix checking of network device type in Add FCoE gui dialog (#1798876)
(rvykydal)
- Use check_task_creation_task in timezone tests (rvykydal)
- Move timezone setup kickstart method to dbus module (rvykydal)
- Do not restart NTP service during its installation (rvykydal)
- Add fixme to ntp from dhcp setting (rvykydal)
- Change "not...in" to "...not in" (vslavik)
- Line length fixes (PEP8) + typos (vslavik)
- Add the DBus method GenerateDeviceFactoryPermissions (vponcova)
- Generate the device factory permissions (vponcova)
- Add the DBus structure DeviceFactoryPermissions (vponcova)
- Move the class DeviceFactoryRequest to a new file (vponcova)
- Set up the environment for pylint (vponcova)
- Unify geoloc logging and enable/disable decision logic (vslavik)
- Disable geoloc by opts.geoloc instead of kernel cmdline (vslavik)
- Add a fallback for a disk of the live device (vponcova)
- If no usable boot drive is found, raise an exception (vponcova)
* Mon Feb 03 2020 Martin Kolman <mkolman@redhat.com> - 32.22-1
- Don't set the device names (#1797274) (vponcova)
- Fix line spacing in UI (vslavik)
- Fix line spacing in pyanaconda (vslavik)
- Extend the start-module script (vponcova)
- Remove start() from pylint defining attrs methods (jkonecny)
- Refactor pylintrc file a bit (jkonecny)
- Remove pylint CVS ignore directory (jkonecny)
- Add TODO to enable C and R in pylint (jkonecny)
- Remove bad-option-value disables from pylint (jkonecny)
- Add TODO for future work (jkonecny)
- Remove use of eval from pylint disabled (jkonecny)
- Ignore attributes of Namespace class (jkonecny)
- Fix GError message False positive (jkonecny)
- Move unnecessary pass statement from false positives (jkonecny)
- Add mock to the list of pylint deprecated modules (jkonecny)
- Fix pylint errors (jkonecny)
- Adapt runpylint to use pocketlint replacement (jkonecny)
- Add pylint censorship - replacement of pocketlint (jkonecny)
* Wed Jan 29 2020 Martin Kolman <mkolman@redhat.com> - 32.21-1
- Add the path-id attribute to the DBus structure for device data (vponcova)
- Use id_path as a long identifier of a disk (vponcova)
- Migrate authselect to dbus tasks (mkolman)
- Remove pyanaconda.flags.cmdline and KernelArguments.getbool() (vslavik)
- Remove duplicated definition of PayloadContainer (vslavik)
- Fix typos in docstrings (vslavik)
- Fix setup-mock-test-env with multiple test commands (jkonecny)
- Add support to run pylint only check (jkonecny)
- Fix most of pep8 issues in pyanaconda/modules subfolder (rvykydal)
- Convert VG reserved_space to Size (vtrefny)
- Do not set default fstype for blivet-gui (vtrefny)
* Mon Jan 20 2020 Martin Kolman <mkolman@redhat.com> - 32.20-1
- Add the DBus method ChangeDevice (vponcova)
- Add the task ChangeDeviceTask (vponcova)
- Add pep8 check (rvykydal)
- Fix max-line-length setting for pep8speaks (rvykydal)
- Extend PayloadFactory tests (jkonecny)
- Add test for payload type DBus API (jkonecny)
- Rename payload shared testing objects (jkonecny)
- Add type property to payloads (jkonecny)
- Rename payload dnf tests to packages tests (jkonecny)
- Add FIXME/TODO about GetActivePayload (jkonecny)
- Move Publishable to PayloadBase (jkonecny)
- Adapt tests to a new Payload publishing (jkonecny)
- Generate %packages only when DNF module was used (jkonecny)
- Fix payloads shared testing class (jkonecny)
- Move payload Packages kickstart processing to Payloads (jkonecny)
- Change GetActivePayloadPath to GetActivePayload (jkonecny)
- Publish payload instead of payload path (jkonecny)
- Change payloads objects to interfaces (jkonecny)
- Migrate LiveOS payload to dynamic publishing (jkonecny)
- Migrate LiveImage payload to dynamic publishing (jkonecny)
- Migrate DNF payload for dynamic publishing (jkonecny)
- Use container to publish payloads (jkonecny)
- Add payload container (jkonecny)
- Rename PAYLOAD_BASE to PAYLOAD (jkonecny)
- Remove unnecessary space (jkonecny)
- Remove DNF DBus namespace (jkonecny)
- Move Packages module publishing to Payloads service (jkonecny)
- Move payload packages out of DNF module (jkonecny)
- Add basic configuration for pep8speaks github app (rvykydal)
- Be more strict when checking for mounted dvd source (rvykydal)
- Protect cdroms during tree population for image installs (rvykydal)
- Finish code conventions rules migration to upstream (jkonecny)
- Require new pykickstart version (jkonecny)
- Revert "Revert "Fix Timezone pykickstart command version"" (jkonecny)
- Add the task AddDeviceTask (vponcova)
- Add the DBus method ValidateDeviceFactoryRequest (vponcova)
- Add the DBus field 'reformat' to the device factory request (vponcova)
- Add the DBus method GetDeviceTypesForDevice (vponcova)
- Add the DBus method GetFileSystemsForDevice (vponcova)
- Add the DBus method GetRawDevice (vponcova)
- Add the DBus method GenerateDeviceName (vponcova)
- Add the DBus method GetDefaultLUKSVersion (vponcova)
- Add the DBus method GenerateDeviceFactoryRequest (vponcova)
- Add the DBus method ValidateRaidLevel (vponcova)
- Add the DBus method ValidateContainerName (vponcova)
- Add the DBus method AddDevice (vponcova)
- Add the DBus method ValidateMountPoint (vponcova)
- Add the DBus method CollectUnusedMountPoints (vponcova)
- Add the DBus method GetSupportedRaidLevels (vponcova)
- Add the DBus method GetDefaultFileSystem (vponcova)
- Add the DBus method CollectSupportedSystems (vponcova)
- Add the DBus method GetDiskTotalSpace (vponcova)
- Add the DBus method CollectBootLoaderDevices (vponcova)
- Add the DBus method CollectUnusedDevices (vponcova)
- Add the DBus method CollectNewDevices (vponcova)
- Add the DBus method GetPartitioned (vponcova)
- Add the DBus method GenerateSystemData (vponcova)
- Add the DBus method GenerateSystemName (vponcova)
- Create the device tree scheduler (vponcova)
- Always create and publish the DASD and ZFCP modules (vponcova)
- Add the DBus method IsSupported to the zFCP module (vponcova)
- Add the DBus method IsSupported to the NVDIMM module (vponcova)
- Add the DBus method IsSupported to the DASD module (vponcova)
- Add the DBus method IsSupported to the iSCSI module (vponcova)
- Add the DBus method IsSupported to the FCoE module (vponcova)
- Allow arch filtering for comps (jmracek)
- Remove duplicated exception handler usage (vslavik)
* Mon Jan 13 2020 Martin Kolman <mkolman@redhat.com> - 32.19-1
- Revert "Fix Timezone pykickstart command version" (vponcova)
- Improve payload packages test for languages (jkonecny)
- Update payload Packages properties tests (jkonecny)
- Update payload LiveImage properties tests (jkonecny)
- Fix Timezone pykickstart command version (jkonecny)
- Fix failed tests introduced by merging multiple PRs (jkonecny)
- Clean up for PEP257, PEP8, etc. in localization and its tests (vslavik)
- Add tests for the rewritten localization module (vslavik)
- Fix wrong code in localization found while writing tests (vslavik)
- Remove parse_langcode(), LANGCODE_RE, and associated tests (vslavik)
- Fix dosctrings by removing mentions of LANGCODE_RE (vslavik)
- Replace remaining uses of parse_langcode by langtable's parsing (vslavik)
- Add and use a convenience function to get language id (vslavik)
- Add and use a mechanism for aborting early with invalid locale (vslavik)
- Add failure tests for %packages --ignorebroken (jkonecny)
- Raise error on --ignorebroken when is disabled (jkonecny)
- Fail to set packages IgnoreBroken when disabled (jkonecny)
- Add enable_ignore_broken_packages configuration (jkonecny)
- Add test for the new Packages API (jkonecny)
- Support --ignorebroken by packages module (#1642013) (jkonecny)
- Support possibility to skip broken packages (#1642013) (jkonecny)
- Do not crash on disk.wwn value being None (#1711571) (rvykydal)
- Fix a callback of the PropertiesChanged signal (vponcova)
- Test unwrapped DBus values (vponcova)
- Replace the default DBus error (vponcova)
- Extend check_task_creation_list (vponcova)
- Simplify langtable method calls (vslavik)
- Require langtable 0.0.49 for its new parsing method (vslavik)
- Fix import, add license statement in dracut driver updates test (vslavik)
* Tue Jan 07 2020 Martin Kolman <mkolman@redhat.com> - 32.18-1
- Fix cppcheck problem with undefined macros (jkonecny)
- Fix C variable use before check for NULL (jkonecny)
- Calculate ip address for kickstart URL ending in / (imsedgar)
- Enable /boot on btrfs subvolume with GRUB2 (ngompa13)
- Remove the workaround in the Resize dialog (vponcova)
- Move the support for resizing devices (vponcova)
- Add KernelArguments.is_enabled() as a replacement for getbool() (vslavik)
- Fix tests broken by renamed modules (vslavik)
- keyboard: pass shared module instance of localed wrapper to tasks (rvykydal)
- keyboard: replace safe_dbus with dasbus in LocaledWrapper (rvykydal)
- Add tests for the KernelArguments class (vslavik)
- Stop KernelArguments inheriting from a dictionary (vslavik)
- Change tests to use kernel.cmdline instead of flags.cmdline (vslavik)
- Change all uses of flags.cmdline to kernel.kernel_arguments (vslavik)
- Rename variables to prevent conflict with importing "kernel_arguments"
(vslavik)
- Change flags.cmdline to use kernel.kernel_arguments (vslavik)
- Add kernel.kernel_arguments providing same functionality as flags.cmdline
(vslavik)
- Only attempt to open the ibm,max-boot-devices sysfs entry if it exists
(javierm)
- Don't add more devices in boot-device NVRAM than the maximum allowed
(javierm)
* Thu Dec 12 2019 Martin Kolman <mkolman@redhat.com> - 32.17-1
- Calculate the space on uninitialized disks (#1782449) (vponcova)
- Define a method required by _schedule_actions (#1782463) (vponcova)
- Split the partitioning code (vponcova)
- Add the attribute children to the device data (vponcova)
* Tue Dec 10 2019 Martin Kolman <mkolman@redhat.com> - 32.16-1
- Add a DBus method for checking resizable devices (vponcova)
- Add DBus methods for partitioned devices (vponcova)
- Add a DBus method for getting device size limits (vponcova)
- Add the attribute protected to the device data (vponcova)
- keyboard: make populating of missing values part of installation task
(rvykydal)
- keyboard: fix write_x_configuration method (rvykydal)
- Reduce progress spinner repaints to save CPU (rhbz#1204242) (vslavik)
- Document the storage setters (vponcova)
- Rename the file with tests for the Blivet partitioning method (vponcova)
- Change the type of AppliedPartitioning (vponcova)
- Rename the callbacks on_storage_reset (vponcova)
- Add the DBus method ResetPartitioning (vponcova)
- Rename the DBus method for resetting the storage (vponcova)
- Test the boot loader factory (vponcova)
- Set up the boot loader factory (vponcova)
- Create the boot loader factory (vponcova)
- Add a new configuration option for the type of the bootloader (vponcova)
- network: wrap IPv4 addresses showed in GUI (#1777706) (rvykydal)
- keyboard: do not return None value from apply configuration task (rvykydal)
- keyboard: fix reference before assignment in apply keyboard task (rvykydal)
- keyboard: add localization module unit tests for keyboard (rvykydal)
- keyboard: fix return value of LocaledWrapper.layouts_variants property
(rvykydal)
- keyboard: fix setting from generic keyboard in ks parsing (rvykydal)
- keyboard: move setting of default value into related task (rvykydal)
- Raise MountFilesystemError from DBus methods (vponcova)
- keyboard: make update_settings_from_task private (rvykydal)
- Add the mount point attribute to the device format data (vponcova)
- Change mock imports to use the unittest.mock full import path (vslavik)
- Rename an attribute of the action data structure (vponcova)
- Change service_start_timeout (vponcova)
- keyboard: update a comment for future refactorisations (rvykydal)
- keyboard: remove superfluous call to write_x_configuration (rvykydal)
- Calculate the space on disks with supported disk labels (vponcova)
- keyboard: guard activation of keyboard configuration in the module (rvykydal)
- keyboard: when converting values restore both console and X (#1775712)
(rvykydal)
- keyboard: do not store generic keyboard setting at all (rvykydal)
- keyboard: split populating of missing keyboard values (rvykydal)
- Fix __all__ in pyanaconda.modules.common.structure.* (vponcova)
- keyboard: do not convert from X value if we have vconsole in apply (#1776148)
(rvykydal)
- Change the DBus support for collecting ancestors (vponcova)
- Add the attribute removable to the device data (vponcova)
- Extend the attributes of the device data (vponcova)
- keyboard: fix getting options from LocaledWrapper (rvykydal)
- keyboard: move LocaledWrapper into localization module (rvykydal)
- keyboard: apply configuration with a task (rvykydal)
- keyboard: populate missing keyboard items with a task (rvykydal)
- keyboard: write configuration with module task (rvykydal)
- keyboard: split out populating of missing values into separate task
(rvykydal)
- keyboard: remove doc for unused weight parameter. (rvykydal)
- keyboard: remove keyboard command from anaconda (rvykydal)
- Rename payload sources to source (jkonecny)
- Rename PayloadService to PayloadsService (jkonecny)
- Rename payloads.payloads to payload.payload (jkonecny)
- Rename payload to payloads for DBus services (jkonecny)
- Rename payload module to payloads (jkonecny)
- Publish main payload under Payloads (jkonecny)
- Create PayloadContainer for dynamic provisioning (jkonecny)
- Rename payload base to payload (jkonecny)
- Use a variable when calling Zanata client in makefile (mkolman)
- Clean up the spoke for the advanced storage (vponcova)
- Rename payload DBus constants (jkonecny)
- Remove handler word from payload leftovers (jkonecny)
- Remove handler word from tests (jkonecny)
- Rename LiveOSHandler* classes to LiveOS* (jkonecny)
- Rename LiveImageHandler* classes to LiveImage* (jkonecny)
- Rename DNFHandler* classes to DNF* (jkonecny)
- Rename handlers from DNF internal variables (jkonecny)
- Rename PackagesHandler* classes to Packages* (jkonecny)
- Rename handler to payload in PayloadBase class (jkonecny)
- Rename publish_handler to publish_payload (jkonecny)
- Rename create_handler to create_payload (jkonecny)
- Rename get_active_handler_path to payload path (jkonecny)
- Rename is_handler_set to is_payload_set (jkonecny)
- Rename payload handler getter and setter to payload (jkonecny)
- Rename HandlerFactory to PayloadFactory (jkonecny)
- Rename HandlerType to PayloadType (jkonecny)
- Remove handler from factories variables (jkonecny)
- Rename HandlerNotSetError to PayloadNotSetError (jkonecny)
- Rename handler in logs for payload service class (jkonecny)
- Rename payload handler internals in payload service (jkonecny)
* Mon Nov 18 2019 Martin Kolman <mkolman@redhat.com> - 32.15-1
- Fix wrong kdump boot option in boot options docs (vslavik)
- Remove unused pylint false positive (jkonecny)
- Remove the DBus library (vponcova)
- Remove the extra support for PropertiesChanged (vponcova)
- Normalize the pretty XML output (vponcova)
- Update the unit tests (vponcova)
- Reorganize the DBus library (vponcova)
- Remove signal subscriptions from anaconda (vponcova)
- Add support for disconnection of a DBus proxy (vponcova)
- Clean up the anaconda's signal (vponcova)
- Remove the anaconda's DBus from the DBus library (vponcova)
- Remove the anaconda's signal from the DBus library (vponcova)
- Remove the anaconda's logger from DBus library (vponcova)
- Create the DBus library (vponcova)
* Tue Nov 12 2019 Martin Kolman <mkolman@redhat.com> - 32.14-1
- network: restrict applying of config from ks in initramfs with NM (#1768791)
(rvykydal)
- network: try to apply kickstart in initramfs only if neeeded (#1768791)
(rvykydal)
- Use default required space solution for LiveOS payload (jkonecny)
- Fix Live Image module required value default (jkonecny)
- Add defaults to payload required space base (jkonecny)
- Move set up and tear down sources to payload base (jkonecny)
- Move installation task API to base payload (jkonecny)
- Move SpaceRequired API to payload base (jkonecny)
- Add tests payload shared API for sources handling (jkonecny)
- Add payload shared test API for sources (jkonecny)
- Tweak payload_shared test class (jkonecny)
- Use payload base interface for existing payloads (jkonecny)
- Add payload base interface implementation (jkonecny)
- Move payload base to payloads folder (jkonecny)
- Move source base classes to payload.sources (jkonecny)
- Add names to the network tests (vslavik)
- Forbid trailing period (dot) in hostname (#1648107) (vslavik)
- Remove the enum PartitioningMethod from the Storage spoke in GUI (vponcova)
- Collections of callbacks in signals can be changed during emitting (vponcova)
- Run the installation tasks of the DBus addons (vponcova)
- Add DBus support for installation tasks for addons in the Boss (vponcova)
- Provide fake installation tasks for the Baz addon (vponcova)
- Add DBus support for installation tasks for addons (vponcova)
- Add support for running DBus tasks in one task (vponcova)
- Don't enable BLS for Xen machines (javierm)
* Tue Nov 05 2019 Martin Kolman <mkolman@redhat.com> - 32.13-1
- Clean up ancient timezone tests (vslavik)
- Add missing quotation mark to tmux.conf (jkonecny)
- Fix too long lines in timezone module tests for PEP8 compliance (vslavik)
- Add timezone interface tests for creation of timezone and NTP tasks (vslavik)
- Add tests for the NTP D-Bus task (timezone module) (vslavik)
- Add tests for the timezone D-Bus task (timezone module) (vslavik)
- Move timezone and NTP from execute() to D-Bus configuration tasks (vslavik)
- Add Neal Gompa as community feature maintainer (jkonecny)
- Add pure community features documentation (jkonecny)
* Tue Oct 29 2019 Martin Kolman <mkolman@redhat.com> - 32.12-1
- Add a temporary hack to fix installations on ppc64le and aarch64 (#1764666)
(mkolman)
* Thu Oct 24 2019 Martin Kolman <mkolman@redhat.com> - 32.11-1
- Fix the timeout of DBus calls (vponcova)
- Remove pydbus from the spec file (vponcova)
- Test DBus support with Gio.TestDBus (vponcova)
- Update the support for DBus properties (vponcova)
- Create variants for the signal PropertiesChanged (vponcova)
- Test the extended support for the DBus observer (vponcova)
- Remove PropertiesCache (vponcova)
- Extend the DBus observer (vponcova)
- Test the extended support for DBus connection (vponcova)
- Extend the support for DBus connections (vponcova)
- Don't use pydbus in the function get_object_path (vponcova)
- Test the client support for DBus objects (vponcova)
- Add the client support for DBus objects (vponcova)
- Test the server support for DBus objects (vponcova)
- Add the server support for DBus objects (vponcova)
- Extend DBus constants (vponcova)
- Test the extended support for DBus specification (vponcova)
- Extend the support for DBus specification (vponcova)
- Test the support for parsing the XML specification (vponcova)
- Add support for parsing the XML specification (vponcova)
- Test the DBus signals (vponcova)
- Extend the Signal class (vponcova)
- Don't use signals from pydbus (vponcova)
- Test the DBus error registration (vponcova)
- Don't use DBus error registration from pydbus (vponcova)
- Remove pydbus from the comments (vponcova)
- Test the extended support for DBus typing (vponcova)
- Extend the support for DBus typing (vponcova)
- Don't import Variant from pydbus (vponcova)
- Fix other payload module cyclic imports (vponcova)
- Add code conventions to upstream (jkonecny)
- Fix payload module cyclic imports (jkonecny)
- Enable networking in the testing environment by default (vponcova)
- network: adapt network config via kickstart from disk to NM in initramfs
(#1757781) (rvykydal)
- network: fix handling of ksdevice=bootif in initramfs (rvykydal)
- Make sure we work with fresh data when trying to do netroot (vpodzime)
- Make our manual triggering on network in dracut work (#1082500) (vpodzime)
- iscsi: do not generate initiator for generated kickstart if iscsi is not used
(rvykydal)
- network: remove useless function (rvykydal)
- network: remove Network command from anaconda (rvykydal)
- network: remove parse method from Network command (rvykydal)
- network: remove packages attribute from Network command (rvykydal)
- Move payload live_os source under its directory (jkonecny)
- Create an empty payload source live_os folder (jkonecny)
- Move payload service constants to the main dir (jkonecny)
- Remove modules.payload.live folder (jkonecny)
- Move rest of payload utils to live_image utils (jkonecny)
- Move create_rescue_image to payload base utils (jkonecny)
- Move get_kernel_version_list to payload base (jkonecny)
- Move InstallFromTarTask to live_image payload (jkonecny)
- Move InstallFromImageTask to payload.base (jkonecny)
- Move UpdateBLSConfigurationTask to payload base (jkonecny)
- Move DownloadProgress to payload live_image (jkonecny)
- Move TeardownInstallationSourceImageTask to payload (jkonecny)
- Move SetupInstallationSourceImageTask to payload (jkonecny)
- Move CheckInstallationSourceImageTask to payload (jkonecny)
- Fix imports after move of live_image payload (jkonecny)
- Move lime_image code to the payloads folder (jkonecny)
- Fix imports after move of live_os payload (jkonecny)
- Move live_os code to the payloads folder (jkonecny)
- Fix imports after move of DNF payload (jkonecny)
- Move DNF handler to payloads folder (jkonecny)
- Remove useless support for boot loader update (vponcova)
* Fri Oct 18 2019 Martin Kolman <mkolman@redhat.com> - 32.10-1
- Return back AutoPart kickstart command (#1761901) (jkonecny)
- Update pyanaconda/exception.py (japokorn)
- Fix links to a new pykickstart GitHub group (jkonecny)
- Rename main modules to services (vponcova)
- don't treat s390 as headless when selecting UI mode (dan)
- Add link to the blog website to our README (jkonecny)
- Add links on our blog to upstream documentation (jkonecny)
- Add PARTUUID to lsblk_output log (japokorn)
- Fix a unit test for a boot loader task (vponcova)
- Test the DBus method FindFormattable (vponcova)
- Add DBus method that finds DASDs for formatting (vponcova)
- Move tests for the zFCP module (vponcova)
- Move tests for the FCoE module (vponcova)
- Move tests for the ISCSI module (vponcova)
- Move tests for the DASD module (vponcova)
* Tue Oct 15 2019 Martin Kolman <mkolman@redhat.com> - 32.9-1
- Don't mark the network command as removed (vponcova)
* Mon Oct 14 2019 Martin Kolman <mkolman@redhat.com> - 32.8-1
- Do not use module_debsolv_errors DNF method (jkonecny)
- Update pyanaconda/rescue.py (slavik.vladimir)
- Make small fixes in the errors file code (jkonecny)
- Make error string wrap more sane (jkonecny)
- Remove make updates (jkonecny)
- Fix regexp for iscsi initiator iqn name validation (#1750865) (rvykydal)
- Disable kickstart output from the Payload module (vponcova)
- Extend the tests for the Boss module (vponcova)
- Mark the network command as removed (vponcova)
- Generate the complete kickstart using the Boss (vponcova)
- Add DBus support for generating a complete kickstart (vponcova)
- Improve the DBus return value for reading a kickstart file (vponcova)
- Add DBus structure for a kickstart report (vponcova)
- Simplify the DBus support for reading a kickstart file (vponcova)
- Don't reimplement the run method in the Boss (vponcova)
- Start DBus modules in a task (vponcova)
- Remove AnacondaBossInterface (vponcova)
- Don't represent the modules observers by their DBus path (vponcova)
- Use a signal to propagate the module observers in the Boss (vponcova)
- Make the nomount boot option work again (vslavik)
- Skip buildins when processing kernel boot args (#1637472) (jkonecny)
- Remove ldconfig scriptlet from a spec file (jkonecny)
- Switch the makeupdates script to Python 3 (mkolman)
- Fix a couple issues identified by Pylint (mkolman)
- PEP8 for function names (mkolman)
- Remove disused support for automatically fetching packages from Koji
(mkolman)
- Support basic nested DBus structures (vponcova)
- Support resolving of simple type hints (vponcova)
- Generate DBus fields with DBusFieldFactory (vponcova)
- Fix a missing patch in unit tests (vponcova)
- Increase test coverage for payload sources (jkonecny)
- Improve docstring on payload source (jkonecny)
- Add logging to the payload source ready state (jkonecny)
- Adapt tests to a new is_ready solution (jkonecny)
- Implement is_ready for live os payload source (jkonecny)
- Switch payload source ready property to method (jkonecny)
- Remove payload source ready setter (jkonecny)
- Add tests for payload sources error propagation (jkonecny)
- Raise exception at the end of sources tear down (jkonecny)
- Payload sources can't be set when initialized (jkonecny)
- Fix doc strings in Live OS payload source (jkonecny)
- Fix doc strings in Payload module (jkonecny)
- Adapt tests to a new payload grouping tasks (jkonecny)
- Use TearDownSourcesTask in LiveOS payload (jkonecny)
- Add tear down payload sources task (jkonecny)
- Use SetUpSourcesTask in LiveOS payload (jkonecny)
- Add set up payload sources task (jkonecny)
- Rename Live OS Source specific tasks (jkonecny)
- Change test for Live payload source readiness (jkonecny)
- Adapt tests to new Installation task with source (jkonecny)
- Check source readiness in Payload install task (jkonecny)
- Remove handler check for source readiness (jkonecny)
- Remove payload sources validate API (jkonecny)
- Replace payload attach_source by set_sources (jkonecny)
- Rename kind to type (jkonecny)
- Rename tear down Live OS source task (jkonecny)
- Add source tests to Live OS (jkonecny)
- Adapt tests to the new Live OS source solution (jkonecny)
- Add check_task_creation_list helper function (jkonecny)
- Add source checkers to Live OS handler (jkonecny)
- Use source object in the Live OS handler (jkonecny)
- Add is source set method to payload handler base (jkonecny)
- Adapt Live OS test for detect image migration (jkonecny)
- Move Live OS image detection to source (jkonecny)
- Adapt payload Live OS handler/source tests (jkonecny)
- Migrate image path from Live OS handler to source (jkonecny)
- Live OS source can have only one source attached (jkonecny)
- Fix line longer than 99 characters in payload (jkonecny)
- Add check if payload source is supported (jkonecny)
- Add payload source type tests (jkonecny)
- Implement type to the payload source base (jkonecny)
- Move payload handler/sources types to constants (jkonecny)
- Implement source attach to the payload handlers (jkonecny)
- Add test for payload CreateSource API (jkonecny)
- Wrap payload source creation to DBusContainer (jkonecny)
- Add support for source creation to Payload module (jkonecny)
- Add payload SourceFactory test (jkonecny)
- Add payload source factory (jkonecny)
- Add test for the payload HandlerFactory class (jkonecny)
- Make payload HandlerFactory class more generic (jkonecny)
- Remove required parameter from the Live OS Source (jkonecny)
- Add Live OS source tear down test (jkonecny)
- Use moved tear down task in Live OS source (jkonecny)
- Move Live OS tear down task to Live OS source (jkonecny)
- Add test for Live OS source validation method (jkonecny)
- Learn Live OS source how to validate source (jkonecny)
- Add Validate API to the payload source base (jkonecny)
- Add test for Live OS Source set up task (jkonecny)
- Move and fix Live OS init source test (jkonecny)
- Use set up source task in the Live OS source (jkonecny)
- Rename set up task for live os source (jkonecny)
- Move set up source live os image task to sources (jkonecny)
- Add empty classes for Live OS payload interface (jkonecny)
- Add base payload source module (jkonecny)
- Add a new python module for payload sources (jkonecny)
* Fri Oct 04 2019 Martin Kolman <mkolman@redhat.com> - 32.7-1
- network: split configure hostname task out of network installation task
(#1757960) (rvykydal)
- Switch to pypi pylint from RPM (jkonecny)
- Allow to handle the return value of subprocess.run (vponcova)
- Remove the unexpected keyword argument 'env' (vponcova)
- Remove the assignment of the same variable to itself (vponcova)
- Remove unused false positives (vponcova)
- Improve updates repo configuration in GUI (#1670471) (mkolman)
- Don't touch storage until it is ready (vponcova)
- Run the manual partitioning task for the given requests (vponcova)
- Set the locale for unit tests (vponcova)
- Deprecate the current kickstart support for addons (vponcova)
- Add kickstart support for the Baz module (vponcova)
- Support the %addon sections in the kickstart specification (vponcova)
- Handle the bootloader reset in the partitioning task (vponcova)
- Fix the DBus patching functions (vponcova)
- Patch DBus proxies in GUI and TUI simple import tests (vponcova)
- Add DBus method for validation of selected disks (vponcova)
- Enable faulthandler in DBus modules (vponcova)
- Reset the storage and the playground of partitioning modules (vponcova)
- Add support for getting an object path of a DBus proxy (vponcova)
- Remove pointless '../../' to clean up NFS mounts (riehecky)
* Wed Sep 25 2019 Martin Kolman <mkolman@redhat.com> - 32.6-1
- Switch between layouts without confirmation (#1333984) (vponcova)
- Remove the old and broken zram-stats script (#1561773) (mkolman)
- Rename _test_dbus_partitioning and _test_dbus_property (vponcova)
- Remove attributes for the static partitioning modules (vponcova)
- Test the custom partitioning from kickstart (vponcova)
- Test the property AppliedPartitioning (vponcova)
- Test the property CreatedPartitioning (vponcova)
- Test the dynamic partitioning modules (vponcova)
- Test the partitioning factory with kickstart (vponcova)
- Generate kickstart from the applied partitioning (vponcova)
- Create a partitioning module for the kickstart data (vponcova)
- Add tests for the storage installation tasks (vponcova)
- Add the installation task for BTRFS (vponcova)
- Add a simple import test for pyanaconda (vponcova)
- Fix the implementation of patch_dbus_publish_object (vponcova)
- Use the validation report for the storage validation (vponcova)
- Remove get_object_path of TaskInterface (vponcova)
- Add support for validation tasks (vponcova)
- Move the partitioning validation to the base class (vponcova)
- Add the installation task for ZIPL (vponcova)
- Improve installation tasks of the Storage module (vponcova)
- Don't initialize PartTypeSpoke from the Summary hub (vponcova)
- Add DBus support for the device ancestors (vponcova)
- Fix the DBus method GetUsableDisks (vponcova)
- network: split function for generating dracut arguments (#1751189) (rvykydal)
- network: generate dracut arguments from connections (#1751189) (rvykydal)
- network: do not touch iBFT connections created in initramfs (#1751189)
(rvykydal)
- Increase EFI System Partition (ESP) size to 200-600 MiB (javierm)
* Tue Sep 17 2019 Martin Kolman <mkolman@redhat.com> - 32.5-1
- payload module: update live image tar payload options with --numeric-owner
(rvykydal)
- payload module: add tests for live image payload interface (rvykydal)
- Only partitions have the is_magic attribute (#1625154) (vponcova)
- network gui: wrap multiple IP addresses in network spoke (#1593561)
(rvykydal)
- Don't use update_storage_ksdata in tests (vponcova)
- Verify existing unlocked LUKS devices without keys (#1624617) (vponcova)
- network tui: fix addr_str referenced before assignment (#1731415) (rvykydal)
- Fix the second screen of Welcome to Fedora (#1748203) (vponcova)
- Add a space after the comma in the description (junjieyuanxiling)
- Use numbers for user/group names when unpacking tar live image (356889)
* Thu Sep 05 2019 Martin Kolman <mkolman@redhat.com> - 32.4-1
- Add tests for the device factory requests (vponcova)
- Raise an exception if the device type is unsupported (vponcova)
- Fix: Move the code for getting the device LUKS versions (vponcova)
- Use a device factory request to populate the right side (vponcova)
- Improve logging of the custom spoke (vponcova)
- Use the device factory request to change devices (vponcova)
- Generate a device factory request (vponcova)
- Use a device factory request to add a mount point (vponcova)
- Add support for transforming device factory requests to arguments (vponcova)
- Add DBus support for the device factory request (vponcova)
- Fix tests after using flatpak format_ref method (jkonecny)
- Use flatpak API to create ref string (jkonecny)
- network: make sure configuration from boot options has ONBOOT=yes (#1727904)
(rvykydal)
- network: fix dumping of generic "Wired connection" created in initramfs
(#1727904) (rvykydal)
- Make clear where repo names are used not objects (jkonecny)
- Remove __main__ functions for testing (vponcova)
- Drop dhclient requirement (pbrobinson)
- Compare normalized XML strings (vponcova)
- Add temporal pylint false positive (jkonecny)
- Make default state of treeinfo repos configurable by product (riehecky)
- Fix pylint test by loading C extensions (jkonecny)
- Drop dhclient requirement (pbrobinson)
- Fall back to a boot drive with a valid stage1 device (#1168118) (vponcova)
- Use test dependencies from Fedora instead of pip (jkonecny)
- Do not crash test env setup in case of empty list (jkonecny)
- Fix parsing of hostname from cmdline for ipv6. (rvykydal)
- dnfpayload: repo in _fetch_md is a dnf repo not ksrepo (awilliam)
- Don't set up a warning label to None (#1745933) (vponcova)
- Add DBus support for shrinking devices (vponcova)
- Add DBus support for removing devices (vponcova)
- Devices to be shrinked are always resizable (vponcova)
- Identify devices by theirs names in the resize dialog (vponcova)
- Refactorize the ResizeDialog (vponcova)
- network module: guard onboot configuration task by environment (rvykydal)
- network: modify autoactivate via NM API with a separate task (rvykydal)
- network: get ONBOOT values from NM connections (rvykydal)
- network: activate connections during initramfs consolidation synchronously
(rvykydal)
- network: block autoactivation also when updating iniramfs connection
(rvykydal)
- network: find initramfs connections even without ifcfg files (#1727904)
(rvykydal)
- network: block autoactivation when adding connection from kickstart
(rvykydal)
- network: split the function for adding a connection from kickstart (rvykydal)
- network: implement NM connection change commit using Update2() (rvykydal)
- network: fix setting real ONBOOT for inactive vlan devices (rvykydal)
- network: modify ONBOOT via libnm during network initialization (rvykydal)
- network: set autoconnect/ONBOOT to yes for default connection in tui
(rvykydal)
- network: get rid of ONBOOT workaround in tui (rvykydal)
- More detailed addon logging (riehecky)
- Revert "Keep getSysroot for kdump-anaconda-addon" (vponcova)
* Mon Aug 26 2019 Martin Kolman <mkolman@redhat.com> - 32.3-1
- Use the task container to publish tasks (vponcova)
- Remove publish_task (vponcova)
- Make tasks publishable (vponcova)
- Create and set up the DBus container for tasks (vponcova)
- Add note to fix time consuming live os dbus task (jkonecny)
- Add notes for the future work on the module payloads (jkonecny)
- Move constants specific for copy dd task (jkonecny)
- Add test for updating bls entries task (jkonecny)
- Add test for Live OS post installation task (jkonecny)
- Add test for create_rescue_image function (jkonecny)
- Add Live OS handler test for install with task (jkonecny)
- Add live payload handler test for InstallWithImageTask (jkonecny)
- Improve tests for live os image detection code (jkonecny)
- Add live os test for kernel version list (jkonecny)
- Make consistent imports (jkonecny)
- Replace getSysroot by conf value (jkonecny)
- Move get_dir_size test to the payload module tests (jkonecny)
- Move get_dir_size function to the payload.base.utils (jkonecny)
- Rename GetDirSize to get_dir_size (jkonecny)
- Add sysroot param to the copy DD files task (jkonecny)
- Change write module blacklist to take sysroot param (jkonecny)
- Change create root dir func to take sysroot param (jkonecny)
- Add sysroot param to prepare installation task (jkonecny)
- Rename payload shared to base (jkonecny)
- Add Live OS handler space required test (jkonecny)
- Inline copy driver disk payload function to task (jkonecny)
- Add API for required space to live os payload handler (jkonecny)
- Add copy DD files task to live image payload handler (jkonecny)
- Use new task copy driver disks files to old payload (jkonecny)
- Add copy DD files as post install task to live os handler (jkonecny)
- Add post-installation task to live os payload handler (jkonecny)
- Do a facelift to the old copy driver disk function (jkonecny)
- Moved copy driver disk to the payload module shared (jkonecny)
- Use new shared task in the old payload module (jkonecny)
- Add test for prepare installation payload task (jkonecny)
- Add tests for payload module shared utils (jkonecny)
- Create and use task to prepare installation for LiveOS (jkonecny)
- Move payload shared code for handlers to a directory (jkonecny)
- Move write module blacklist to paylod module (jkonecny)
- Move create root directory to its own function (jkonecny)
- Add install task with API to Live OS handler (jkonecny)
- Add kernel version list support to live os handler (jkonecny)
- Fix noverifyssl when downloading .treeinfo file (#1723811) (jkonecny)
- Add the DBus property PartitioningMethod (vponcova)
- Add support for dynamic partitioning modules (vponcova)
- Make partitioning modules publishable (vponcova)
- Create the partitioning factory (vponcova)
- Use a DBus container for the device trees (vponcova)
- Add support for DBus containers (vponcova)
- Add a simple unit test for TUI and GUI (vponcova)
- Add logic to create flatpaks rpmostree payload (#1734970) (jkonecny)
- Move flatpak code to a new ostree payload class (#1734970) (jkonecny)
- Create flatpak in ostree payload only if available (#1734970) (jkonecny)
- Update tests for new class method is_available (#1734970) (jkonecny)
- Make flatpak is_available() a static method (#1734970) (jkonecny)
- Remove the fixed file:// from the flatpak remote (#1734970) (jkonecny)
- Fix payload prepare mount targets install task (#1734970) (jkonecny)
- Merge rpmostreepayload installation under one task (#1734970) (jkonecny)
- Move progress messaging from flatpak to rpmostree (#1734970) (jkonecny)
- Add test for flatpak change remote for refs (#1734970) (jkonecny)
- Replace remote for installed refs in rpmpayload (#1734970) (jkonecny)
- Use new flatpak replace remote on installed refs (#1734970) (jkonecny)
- Add flatpak remote replace for installed refs (#1734970) (jkonecny)
- Make flatpak ref full format method more generic (#1734970) (jkonecny)
- Create an flatpak base ref list object (#1734970) (jkonecny)
- Use flatpak add/remove remotes in ostree payload (#1734970) (jkonecny)
- Add flatpak tests for adding and removing remotes (#1734970) (jkonecny)
- Implement flatpak adding and removing remotes (#1734970) (jkonecny)
- Adapt flatpak tests to the new changes (#1734970) (jkonecny)
- Change flatpak remote logic (#1734970) (jkonecny)
- Rename flatpak REMOTE_NAME to LOCAL_REMOTE_NAME (#1734970) (jkonecny)
- Make flatpak ref lists object consistent (#1734970) (jkonecny)
- Implement object to get installed flatpak refs (#1734970) (jkonecny)
- Add flatpak error reporting implementation (#1734970) (jkonecny)
- Cleanup temp repository of flatpak before install (#1734970) (jkonecny)
- Add and fix tests for newly added flatpak cleanup (#1734970) (jkonecny)
- Add flatpak cleanup method (#1734970) (jkonecny)
- Split flatpak setup to two initialization methods (#1734970) (jkonecny)
- Fix tests after connecting to flatpak signals (#1734970) (jkonecny)
- Add callbacks to monitor flatpak transactions (#1734970) (jkonecny)
- Install flatpaks as part of ostree installation (#1734970) (jkonecny)
- Add test for the flatpak install method (#1734970) (jkonecny)
- Add support to install all remote flatpaks (#1734970) (jkonecny)
- Add flatpak required space test (#1734970) (jkonecny)
- Add get_required_space to the flatpak payload (#1734970) (jkonecny)
- Add flatpak object to abstract flatpak Ref list (#1734970) (jkonecny)
- Don't configure the default target without systemd (#1744115) (vponcova)
- Change flatpak remote name to constant (#1734970) (jkonecny)
- Use FlatpakPayload from the RPMOStreePayload (#1734970) (jkonecny)
- Add test for the flatpak setup method (#1734970) (jkonecny)
- Add method to setup flatpak objects (#1734970) (jkonecny)
- Add flatpak test for remote availability (#1734970) (jkonecny)
- Add check if flatpak remote repo is available (#1734970) (jkonecny)
- Add libflatpak dependency to the anaconda spec (#1734970) (jkonecny)
- Add an empty class to handle flatpak (#1734970) (jkonecny)
- Look for existing installations on existing devices (vponcova)
- Require a mount point only for mountable formats (vponcova)
- Handle the missing mountpoint attribute (#1743853) (vponcova)
* Mon Aug 19 2019 Jiri Konecny <jkonecny@redhat.com> - 32.2-1
- Set the minimum required entropy only once (vponcova)
- Rename the icon (#1740864) (vponcova)
- Format strings with format in interactive utils (vponcova)
- Rename _get_device_info_description in the custom spoke (vponcova)
- Remove pyanaconda.storage.partitioning (vponcova)
- Use the partitioning request in TUI (vponcova)
- Use the partitioning request in GUI (vponcova)
- Update the storage initialization and configuration (vponcova)
- Use the partitioning request in the tests (vponcova)
- Use the partitioning request in the automatic partitioning module (vponcova)
- Use the partitioning request in the automatic partitioning task (vponcova)
- Exclude mount points from the automatic partitioning (vponcova)
- Create a DBus structure for the partitioning request (vponcova)
- Don't load the repo device path twice in the Payload class (vponcova)
- Rename device_path to repo_device_path in the Payload class (vponcova)
- Rename get_mount_device in payload utils (vponcova)
- Remove a redundant condition in the Payload class (vponcova)
- Specify types of arguments in the payload utils (vponcova)
- Use the payload utils in UI (vponcova)
- Add a new function unmount_device to payload utils (vponcova)
- Add a new function setup_device to payload utils (vponcova)
- Add a new function mount_device to payload utils (vponcova)
- Add a new function teardown_device to payload utils (vponcova)
- Move the support methods for image installations (vponcova)
- Change the method for finding potential HDISO sources (vponcova)
- Change the method for finding a valid optical install media (vponcova)
- Add a new function resolve_device to payload utils (vponcova)
- Rename variables and arguments in the Payload class (vponcova)
- Provide a documentation for the payload utils (vponcova)
- Don't propagate the storage and data to the payload again (vponcova)
- Collect addons after running the %pre section (vponcova)
- Fix: Merge the code for the device info validation (vponcova)
- Fix: Generate the device info in interactive utils (vponcova)
- Fix: Simplify the code for validating mount points (vponcova)
- Handle a missing value of the mount point attribute (vponcova)
- Improve logging of the device info changes (vponcova)
- Remove the constants for the device type strings (vponcova)
- Move the code for collecting supported RAID levels (vponcova)
- Move the code for the device info validation (vponcova)
- Move the code for the raid level validation (vponcova)
- Simplify the code for validating mount points (vponcova)
- Move the code for validating mount points (vponcova)
- Generate the device info in interactive utils (vponcova)
- Simplify overriding disk set with container's (vponcova)
- Simplify the removal of the device (vponcova)
- Merge the code for changing the size (vponcova)
- Move code to the function revert_reformat (vponcova)
- Change arguments of the method for reformatting (vponcova)
- Merge the code for the device info validation (vponcova)
- Split the code for collecting the new device info (vponcova)
- Move the code for collecting the new device info (vponcova)
- Apply the device info changes in new methods (vponcova)
- Remove the code for comparing the device info (vponcova)
- Remove variables for new device info (vponcova)
- Remove variables for old device info (vponcova)
- Move the code for comparing the device info (vponcova)
- Simplify logging of the device infos (vponcova)
- Move the code for the new device info (vponcova)
- Move the code for the old device info (vponcova)
- Add squashfs+overlayfs base live image detection (bcl)
- liveinst: Add support for plain squashfs root filesystem (bcl)
* Wed Aug 14 2019 Martin Kolman <mkolman@redhat.com> - 32.1-1
- Use append_dbus_tasks() for DBus Task scheduling (mkolman)
- Add append_dbus_task method to TaskQueue (mkolman)
- Replace Firewall and Network command setup() method (mkolman)
- Add support for localization of modules (rvykydal)
- Don't measure code coverage during the installation (vponcova)
- Use the new discovery & join DBUS tasks (mkolman)
- Increase network timeout constant (jkonecny)
- Add DBUS Tasks for realm discovery & joining a realm (mkolman)
- Add the add_requirements() method for PayloadRequirements (mkolman)
- Extend RealmData (mkolman)
- Set timeout for all session.get calls (jkonecny)
- Add support for disabling modules via module --disable (mkolman)
- Don't check the format status in UI (vponcova)
- Fix updating of ifcfg files for ifname= bound devices (#1727904) (rvykydal)
- network module: be more strict when adding physical device configuration
(#1727904) (rvykydal)
- Adapt to changes caused by NM in initramfs (#1727904) (rvykydal)
- Change the documentation of the 'reason' attribute (vponcova)
- Fix traceback in network module installation task. (rvykydal)
- Remove the connect method of DBusObserver (vponcova)
- Remember which modules are addons (vponcova)
- Simplify the initialization of the module observer (vponcova)
- Remove the support for the object observer (vponcova)
- Move the module manager to a new subpackage (vponcova)
* Wed Jul 31 2019 Martin Kolman <mkolman@redhat.com> - 31.22-1
- Fix pylint warning (vponcova)
- Keep getSysroot for kdump-anaconda-addon (vponcova)
- Specify sizes of nonexistent devices in tests (vponcova)
- network tui: fix a typo concerning inifiniband device configuration
(rvykydal)
- Remove the object observers from UI (vponcova)
- Remove the method changed (vponcova)
- Move the preserved arguments to the Anaconda configuration file (vponcova)
- Remove system root from DBus methods (vponcova)
- Rename setSysroot (vponcova)
- Replace getSysroot (vponcova)
- Replace getTargetPhysicalRoot (vponcova)
- Replace publisher patches with the new solution (jkonecny)
- Handle disk selection errors in get_candidate_disks (vponcova)
- Don't verify mounted partitions of protected disks (vponcova)
- Always protect the live backing device (#1706335) (vponcova)
- Don't change the storage if the reset fails (vponcova)
- Remove support for teardown before storage reset (vponcova)
* Thu Jul 25 2019 Jiri Konecny <jkonecny@redhat.com> - 31.21-1
- Always schedule the installation task for joining realm (#1732620) (vponcova)
- Fix issue raised by giving publisher as last parameter (jkonecny)
- Use the new publisher patch decorator in a tests (jkonecny)
- Add decorator as shortcut for a publisher patching (jkonecny)
- Add test for creating invalid payload handler (jkonecny)
- Fix tests after removing handlers publish method (jkonecny)
- Remove _publish_handler method from payload module (jkonecny)
- Fix tests because of new payload API change (jkonecny)
- Remove get_handler_path from payload handlers (jkonecny)
- Return path from payload handler publish methods (jkonecny)
- Join all the payload handler create methods (jkonecny)
- Publish payload handler after KS data are parsed (jkonecny)
- Add handler factory and use that in payload module (jkonecny)
- Add tests for new payload API (jkonecny)
- Do not create payload handler if already set (jkonecny)
- Add API to test if there is a payload handler set (jkonecny)
- Do not set default payload handler (jkonecny)
- Don't prune and sort actions in the partitioning task (vponcova)
- Fix imports in the tests (jkonecny)
- Adapt payload tests to a new task check function (jkonecny)
- Adapt network tests to a new task check function (jkonecny)
- Adapt localization tests to a new task check function (jkonecny)
- Adapt bootloader test to a new task check function (jkonecny)
- Adapt storage tests to a new check task function (jkonecny)
- Make a new test func to check task creation (jkonecny)
- Add test for new payload API on live image creation (jkonecny)
- Add new payload API to create live image handler (jkonecny)
- Add tests for new payload handlers solution (jkonecny)
- Fix tests after payload handler logic change (jkonecny)
- Add support to create DNF payload handler (jkonecny)
- Improve payload handler creation abstraction (jkonecny)
- Publish payload handler before it is set (jkonecny)
- Fix payload generate_kickstart with no handler (jkonecny)
- Add payload module API to get active handler (jkonecny)
- Publish handler in the creation method call (jkonecny)
- Propagate DBus path when creating handler (jkonecny)
- Use base handler class by the handler modules (jkonecny)
- Add payload handler base class (jkonecny)
- Change main payload handlers to property (jkonecny)
- Add root password SSH login override checkbox (#1716282) (mkolman)
* Mon Jul 22 2019 Jiri Konecny <jkonecny@redhat.com> - 31.20-1
- Move code to exctract kernel version from tar to utils (jkonecny)
- Add link for our translations to README (#1729788) (jkonecny)
- Change Makefile zanata client check from pkg to bin (jkonecny)
- Add recommendation to release process guide (jkonecny)
- Remove unnecessary step from release in mock doc (jkonecny)
- Fix mock release dependency in a mock (jkonecny)
- Fix: Simplify the code for creating container store rows (vponcova)
- Fix a docstring of add_device (vponcova)
- Get the current device type only once (vponcova)
- Move the code for getting the name of the new root (vponcova)
- LiveImagePayload: move some functions to utils.py (rvykydal)
- LiveImagePayload: replace PostInstallTask with UpdateBLSConfigurationTask
(rvykydal)
- LiveImageHandler: make API and implementation method names consistent
(rvykydal)
- LiveImageHandler: use more descriptive names for installation tasks
(rvykydal)
- LiveImagePayload: Do not provide API for setting of required space (rvykydal)
- LiveImageHandler: prevent reusing of DownloadProgress instance (rvykydal)
- LiveImageHandler: simplify using of SetupInstallationSourceImageTask result
(rvykydal)
- LiveImageHandler: simplify using of CheckInstallationSourceImageTask result
(rvykydal)
- LiveImageHandler: remove interfaces for task results we don't need (rvykydal)
- Add logging to interactive utils (vponcova)
- Fix the FIXME comment for collect_selected_disks (vponcova)
- Rename the argument for the boot drive (vponcova)
- Remove empty lines in collect_used_devices (vponcova)
- Fix: Move the code for collecting device types (vponcova)
- Fix: Move the code for completing the device info (vponcova)
- Fix: Move the code for hiding protected disks to InstallerStorage (vponcova)
- Move the code for suggesting device names (vponcova)
- Fix: Move the code for getting a container device (vponcova)
- Fix: Move the code for collecting device types (vponcova)
- Fix pylint issues in the custom spoke (vponcova)
- Move the code for label validation (vponcova)
- Move the code for collecting supported mount points (vponcova)
- Show a detailed warning in the custom spoke (vponcova)
- Show a detailed error in the custom spoke (vponcova)
- Move the code for collecting containers (vponcova)
- Move the code for getting a container device (vponcova)
- Populate a container for the given device (vponcova)
- Simplify the code for creating container store rows (vponcova)
- Move the code for renaming containers (vponcova)
- Move the code for destroying devices (vponcova)
- Remove the method for removing empty parents (vponcova)
- Move the code for completing the device info (vponcova)
- Move the code for creating devices (vponcova)
- Move the function get_device_raid_level (vponcova)
- Refactor the code for setting up the device types (vponcova)
- Move the code for collecting device types (vponcova)
- Move the code for collecting file system types (vponcova)
- Move the code for getting the device LUKS version (vponcova)
- Move the code for the device reformatting (vponcova)
- Move the code for changed encryption (vponcova)
- Move the code for changing the device size (vponcova)
- Move the code for reverting reformat (vponcova)
- Collect roots with supported devices (vponcova)
- Move the code for adding the unknown page (vponcova)
- Move the code for adding the root page (vponcova)
- Move the code for creating a new root (vponcova)
- Move the code for adding the initial page (vponcova)
- Move the code for collecting roots to interactive utils (vponcova)
- Move constants and function from custom_storage.py (vponcova)
- Optimize the method _update_space_display of the custom spoke (vponcova)
- Remove the method _current_total_space from the custom spoke (vponcova)
- Remove the method _set_current_free_space of the custom spoke (vponcova)
- Move the code for hiding protected disks to InstallerStorage (vponcova)
- Don't check if disks have media present (vponcova)
- Rename _clearpart_devices in CustomPartitioningSpoke (vponcova)
- Rename get_new_devices in CustomPartitioningSpoke (vponcova)
- Fix: Remove bootloader_devices from CustomPartitioningSpoke (vponcova)
- Fix: Remove unused_devices from CustomPartitioningSpoke (vponcova)
- Remove bootloader_devices from CustomPartitioningSpoke (vponcova)
- Remove the attribute _devices from CustomPartitioningSpoke (vponcova)
- Remove unused_devices from CustomPartitioningSpoke (vponcova)
- Remove the property unused_devices from InstallerStorage (vponcova)
- Remove banners (vponcova)
- Replace the Progress hub (vponcova)
- Remove useless class attributes from SpokeCategory (vponcova)
- LiveImageHandler: add progress reporting of download (rvykydal)
- LiveImageHandler: split out Teardown task from PostInstall (rvykydal)
- LiveImageHandler: pass source image mount point as argument to tasks
(rvykydal)
- LiveImageHandler: PostInstallWithTask() 2/2 (rvykydal)
- LiveImagehandler: InstallWithTask() (rvykydal)
- LiveImageHandler: UpdateKernelVersionList() (rvykydal)
- LiveImageHandler: PostInstallWithTask() 1/2 (rvykydal)
- Change the sort order of the User Settings category (vponcova)
- Move all spokes to the Summary hub (vponcova)
- LiveImageHandler: PreInstallWithTask() (rvykydal)
- LiveImageHandler: SetupWithTask() (CheckInstallationSourceImage) (rvykydal)
* Thu Jul 11 2019 Jiri Konecny <jkonecny@redhat.com> - 31.19-1
- Call teardown_all explicitly (vponcova)
- Don't publish the module in the loop (vponcova)
- Start swap on ZRAM service (cmurf)
- Use %autosetup instead of %setup (mkolman)
- Adjust the exclude arguments for livepayloads (bcl)
- Recreate the BLS entries when using liveimg (bcl)
- Cache the liveimg tar kernel list (bcl)
- Add common function for creating rescue images (bcl)
- move comment into docstring for PowerNVGRUB2 install method (dan)
- add PowerNV into BootloaderClassTestCase (dan)
- LiveImage payload: clean up directory used for image mounting (rvykydal)
- LiveImage payload: mount live image privately (rvykydal)
- introduce PowerNV variant for grub2 class (dan)
- initial PowerNV class support (dan)
- Add the option decorated_window to the Anaconda configuration (vponcova)
- Add test for Live OS detect live os image feature (jkonecny)
- Add Live OS base image detection code (jkonecny)
- Add tests for the new Live OS tasks (jkonecny)
- Add Live OS handler tests for ImagePath property (jkonecny)
- Implement teardown to Live OS payload handler (jkonecny)
- Add support to create Live OS handler manually (jkonecny)
- Implement SetupInstallationSource Live OS task (jkonecny)
- Add ImagePath property to the Live OS handler (jkonecny)
- Add an empty LiveOS payload handler (jkonecny)
- Don't use the auto partitioning module in the custom spoke (vponcova)
- Add support for decomposing DBus values (vponcova)
- Use the default file system type for /boot (vponcova)
- Move updates reponames to constants (riehecky)
- Fix setting and reporting ready state in Source Spoke. (rvykydal)
* Tue Jun 25 2019 Jiri Konecny <jkonecny@redhat.com> - 31.18-1
- Add comprehensive unit tests for ConfigureFirewallTask (mkolman)
- Fix a typo (mkolman)
- Use FirewallMode enum firewall configuration DBus Task (#1722979) (mkolman)
- Don't encrypt devices in the interactive partitioning by default (vponcova)
- Provide a default passphrase for the PassphraseDialog (vponcova)
- Set the passphrase for the automatic partitioning from the dialog (vponcova)
- Don't use the global encryption passphrase (vponcova)
- Add support for passphrases in the device tree module (vponcova)
- Handle the passphrase requirements in the partitioning modules (vponcova)
- Use _get_passphrase in the custom partitioning task (vponcova)
- Don't generate passphrases in a kickstart file (vponcova)
- Fix the unit tests for the Services module (vponcova)
- Convert names of attributes and variables in custom storage helpers
(vponcova)
- Fix code alignment in the custom storage helpers (vponcova)
- Convert names of attributes and variables in the custom spoke (vponcova)
- Remove local variables with unused values in the custom spoke (vponcova)
- Fix code alignment in the custom spoke (vponcova)
- Initialize attributes in the __init__ method of the custom spoke (vponcova)
- Reorganize imports in the custom spoke (vponcova)
* Mon Jun 24 2019 Martin Kolman <mkolman@redhat.com> - 31.17-1
- Move graphical login detection to a DBus Task (#1722950) (mkolman)
- Add DBus support for device trees of partitioning modules (vponcova)
- Create the interactive partitioning module (vponcova)
- Fix misleading comment (riehecky)
* Thu Jun 20 2019 Martin Kolman <mkolman@redhat.com> - 31.16-1
- Replace the XConfig execute() method by DBus Tasks (mkolman)
- Fix list-screens script reference (gpchelkin)
- Fix protecting of the live device (#1699387) (vponcova)
- Adapt tests for new Live payload handler changes (jkonecny)
- Add setters to LiveImage payload handler (jkonecny)
- Rename Live payload handler to LiveImage (jkonecny)
- Extend payload live handler with new properties (jkonecny)
- Add read only properties to payload Live handler (jkonecny)
- Add the apply-updates script (vponcova)
- Add payload live handler tests (jkonecny)
- Update payload DNF handler tests (jkonecny)
- Create a new payload handler mixin class for tests (jkonecny)
- Improve the documentation of inst.stage2.all and inst.ks.all (vponcova)
- Add DBus support for teardown tasks (vponcova)
- Tear down images with teardown_disk_images (vponcova)
- Move get_anaconda_version_string to util (vponcova)
- Support multiple payload handlers (jkonecny)
- Add kickstart processing to payload live handler (jkonecny)
- Create Live payload handler module (jkonecny)
- Deprecate the method changed (vponcova)
- Calculate free space for the physical root in dir installations (vponcova)
- Use the actual sysroot to pick up a mount point for downloading (vponcova)
- Use the physical root for mounting existing systems (vponcova)
- Change the path to the system root (vponcova)
- Read files in /etc/anaconda/conf.d on demand (vponcova)
* Thu Jun 13 2019 Martin Kolman <mkolman@redhat.com> - 31.15-1
- iscsi: require relevant blivet version for iscsi module (rvykydal)
- iscsi: add unit tests for iscsi module (rvykydal)
- iscsi: fix name of some method arguments (target -> portal) (rvykydal)
- iscsi: use proper iscsi interface mode constants in ui (rvykydal)
- iscsi: update the CanSetInitiator docstring to reflect the reality (rvykydal)
- iscsi: move conversion to IscsiInterfacesMode from implementation to
interface (rvykydal)
- iscsi: use better name for a NodeIsFromIbft method (rvykydal)
- iscsi: move kickstart iscsi processing into the iSCSI module (rvykydal)
- iscsi: attach iBFT targets in early kickstart by the iSCSI module (rvykydal)
- iscsi gui: show target in Target column (not initiator) (rvykydal)
- iscsi: rename iSCSI node info attribute holding name of iscsi interface
(rvykydal)
- iscsi: move dracut argument generating into the iSCSI module (rvykydal)
- iscsi: get info about target being added from iBFT from the iSCSI module
(rvykydal)
- iscsi: use attributes added blivet iscsi device replacing iscsi node object
(rvykydal)
- iscsi: rename Target to Portal where appropriate (rvykydal)
- iscsi: move kickstart data update to the iSCSI module (rvykydal)
- iscsi: write configuration by the iSCSI module (rvykydal)
- iscsi: use the iSCSI module by kickstart iscsi command (rvykydal)
- iscsi: use the iSCSI module in GUI (rvykydal)
- Adapt iSCSI structures to dbus structure updates (rvykydal)
- Use the ISCSI module in the ISCSIDialog (vponcova)
- Create DBus tasks for discovering iSCSI nodes (vponcova)
- Create the basic structure for the iSCSI module (vponcova)
- Hide spokes in Silverblue and Workstation (vponcova)
- Remove the screen access management (vponcova)
- Hide spokes with the Anaconda configuration file (vponcova)
- Run the DBus task for configuration of post-installation tools (vponcova)
- Replace the lang execute() method (mkolman)
- Collect requirements of the Storage module (vponcova)
- Add DBus support for module requirements (vponcova)
- Replace the Services execute() method by a DBus Task (mkolman)
- Replace the SELinux execute() method by a DBus Task (mkolman)
- Replace the Firewall execute() method by a DBus Task (mkolman)
- Add FirewallConfigurationTask DBus Task (mkolman)
- Add root parameter to execInSysroot utility function (mkolman)
- Improve post install tools configuration (mkolman)
* Fri May 31 2019 Martin Kolman <mkolman@redhat.com> - 31.14-1
- Require langtable-0.0.44, drop langtable-data requirement (mfabian)
- Extend the format data with the mountable property (vponcova)
- Add DBus support for supported file system types (vponcova)
- Add DBus support for getting format type data (vponcova)
- Add DBus support for gathering mount point requests (vponcova)
- Move tests for partitioning modules to new files (vponcova)
- Add DBus support for populating a device tree (vponcova)
- Don't define the __eq__ method of DBusData (vponcova)
- Add DBus support for mounting the existing system (vponcova)
- Extend the function mount_existing_system (vponcova)
- Add DBus support for finding existing operating system (vponcova)
- Simplify generate_string_from_data (vponcova)
- Define the __eq__ method of DBusData (vponcova)
* Mon May 27 2019 Martin Kolman <mkolman@redhat.com> - 31.13-1
- Parse the output of df correctly (#1708701) (vponcova)
- Skip scaling if there is no primary monitor (#1592014) (vponcova)
- Document how to report a bug (vponcova)
- Handle post inst tools toggling in screen access manager (mkolman)
- Fix a typo in Initial Setup configuration task (mkolman)
- Remove methods _setup_mount_data and _process_mount_data (vponcova)
- Rename MountPoint to MountPointRequest (vponcova)
- Add tests for the storage checker module (vponcova)
- Add DBus support for setting a constraint (vponcova)
- Don't check the storage in a separate thread (vponcova)
- Remove HMC from flags (jkonecny)
- Rename the method add_new_constraint (vponcova)
- Rename the method add_constraint (vponcova)
- Remove the update_constraint method (vponcova)
- Create the DBus module for the storage checker (vponcova)
- Use MountPoint in TUI (vponcova)
- Use MountPoint in ManualPartitioningTask (vponcova)
- Use MountPoint in tests (vponcova)
- Use MountPoint as DBus structure (vponcova)
- Cleanup long removed "headless" option from docs (mkolman)
* Wed May 15 2019 Martin Kolman <mkolman@redhat.com> - 31.12-1
- Fix condition for running GUI User spoke in Initial Setup (mkolman)
- Expose individual user group, user and root password DBus tasks (mkolman)
- Use a DBus task for Initial Setup configuration (mkolman)
- Add ConfigureInitialSetupTask (mkolman)
- Sysroot support for enable_service() and disable_service() (mkolman)
- Fix documentation for nosslverify (jkonecny)
- Replace noverifyssl flag in anaconda (jkonecny)
- Adjust verify_ssl config from cmdline (jkonecny)
- Move payload nosslverify to the config files (jkonecny)
- Skip some of the driver disk tests (vponcova)
- Use the absolute paths to set the testing environment (vponcova)
- Use DBus consistently (mkolman)
- Test generate_string_from_data with invalid argument (vponcova)
- Make from_structure and to_structure more strict (vponcova)
* Thu May 02 2019 Martin Kolman <mkolman@redhat.com> - 31.11-1
- Remove no longer needed kickstart command overrides (mkolman)
- Use Users DBUS module for user configuration in GUI (mkolman)
- Use Users DBUS module for user configuration in TUI (mkolman)
- Adjust Users module DBus API for better kickstart root configuration
(mkolman)
- Use DBusData base class for data holders (mkolman)
- Add a string representation for UserData (mkolman)
- Add ui/lib/users.py (mkolman)
- Use a constant for the UID/GID not set value (mkolman)
- Improve ksdata <-> user data methods in Users DBUS module (mkolman)
- Do root, group, user and SSH key configuration with DBUS tasks (mkolman)
- Add tasks for root, user, group and ssh key configuration (mkolman)
- Fix indentation for user creation method docstring (mkolman)
- Drop support for using custom password crypt algorithm (mkolman)
- Make clear_root_password() into set_root_password() alias (mkolman)
- Lock root & user accounts if password in kickstart is empty (mkolman)
- Convert create_user() from kwargs to optional args (mkolman)
- Convert create_group() from kwargs to optional args (mkolman)
- Mark the root account as locked by default (mkolman)
- Add docstrings & some signature tweaking in users.py (mkolman)
- Move methods from User class to module top-level (mkolman)
- Apply PEP8 for method names in users.py (mkolman)
- Move user management code to core (mkolman)
- Use Pykickstart data classes via handler (mkolman)
- Add API for easy admin user detection (mkolman)
- Add support for SSH key management via the users DBUS module (mkolman)
- Add support for group management via the users DBUS module (mkolman)
- Add support for managing multiple users to the users module (mkolman)
* Tue Apr 30 2019 Martin Kolman <mkolman@redhat.com> - 31.10-1
- get_iface_from_hwaddr: be more careful about hwaddr (#1703152) (awilliam)
- network: fix a typo in infiniband connections creating (#1698937) (rvykydal)
- network: do not crash on --device bootif when BOOTIF is not specified
(#1699091) (rvykydal)
- Add DBus support for the device specifier for use in /etc/fstab (vponcova)
- Set swap devices for fstab in the interactive partitioning (vponcova)
- Refactor the passphrase setup on unconfigured LUKS devices (vponcova)
- Add DBus support for UUID (vponcova)
- Add DBus support for device format (vponcova)
- Add DBus support for unlocking LUKS devices (vponcova)
- Add DBus support for finding mountable partitions (vponcova)
- We inherit self.data.repo.dataList() from parent class. (riehecky)
* Thu Apr 11 2019 Martin Kolman <mkolman@redhat.com> - 31.9-1
- Remove the function get_structure (vponcova)
- Remove the function apply_structure (vponcova)
- Remove the decorator (vponcova)
- Add the class DBusData (vponcova)
- Give payload a hook for adding disabled repos. (riehecky)
- Extend the function generate_string_from_data (vponcova)
- Blivet-GUI should wait for the storage threads to finish (#1696478)
(vponcova)
- network: do not pass None value from NM device object to data holder
(#1695967) (rvykydal)
- Handle bytes and strings from RPM (#1693766) (vponcova)
- network module: add network module unit tests (rvykydal)
* Tue Apr 09 2019 Martin Kolman <mkolman@redhat.com> - 31.8-1
- network: create systemd .link files for ifname= boot options (#1695894)
(rvykydal)
- Bump Workstation root partition max size to 70 GiB (klember)
- Add DBus support for finding optical media (vponcova)
- Add DBus support for handling a device (vponcova)
- Do not use ISO source as install tree root (#1691832) (jkonecny)
- Fix bad assumption about base repo identification (#1691832) (jkonecny)
- network tui: fix updating of a connection from UI (#1692677) (rvykydal)
- network: fix copying of resolv.conf for cases where target /etc does not
exist (#1695990) (rvykydal)
- network: fix crash ensuring single connections for unplugged devices
(#1695899) (rvykydal)
- Add support for skipping attributes in the string representation (vponcova)
- Raise the UnknownDeviceError exception (vponcova)
- Add DBus support for resolving devices (vponcova)
- Add DBus support for the available space (vponcova)
- Move GetRequiredDeviceSize to the device tree module (vponcova)
- Create the device tree module (vponcova)
- Don't set the __repr__ methods of data classes (vponcova)
- network: for vlan set DEVICE only if interfacename is specified in kickstart
(rvykydal)
- Change fips package requirement reason (jkonecny)
- payload: raise exception on invalid Languages (jkonecny)
- payload: Mark DefaultEnvironment API as temporary (jkonecny)
- payload: fix default values for packages section (jkonecny)
- Remove unused import for DNF (jkonecny)
- payload: add converter for kickstart groups (jkonecny)
- payload: switch multilib policy to names (jkonecny)
- payload: add rest of the DNF/Packages attributes (jkonecny)
- payload: add packages controlling properties (jkonecny)
- payload: add package groups interface to Packages (jkonecny)
- payload: adjust packages section attributes (jkonecny)
- payload: move %packages parsing to DNF/Packages (jkonecny)
- payload: add DBus packages dnf submodule (jkonecny)
- payload: add the empty DNF handler (jkonecny)
- payload: create internal Packages class (jkonecny)
- payload: parse %packages section in module (jkonecny)
* Tue Apr 02 2019 Martin Kolman <mkolman@redhat.com> - 31.7-1
- Create the initialization config in _get_initialization_config (vponcova)
- Remove config from InstallerStorage (vponcova)
- Update DiskInitializationConfig only before clearpart (vponcova)
- Create the method can_initialize (vponcova)
- Remove should_clear from InstallerStorage (vponcova)
- Remove clear_partitions from InstallerStorage (vponcova)
- Replace StorageDiscoveryConfig (vponcova)
- Update the protected devices in the Storage module (vponcova)
- Import the bootloader classes on demand (vponcova)
- Remove bootloader_device from InstallerStorage (vponcova)
- Remove update_bootloader_disk_list from InstallerStorage (vponcova)
- Remove boot_fstypes of InstallerStorage (vponcova)
- Remove set_up_bootloader from InstallerStorage (vponcova)
- Define all bootloader attributes in the __init__ method (vponcova)
- Remove workarounds for the unset bootloader (vponcova)
- Clean up the do_it method of the storage (vponcova)
- Validate the GRUB2 configuration in the Bootloader module (vponcova)
- Add DBus support for the bootloader arguments (vponcova)
- Add DBus support for detecting Windows OS (vponcova)
- Add DBus support for EFI (vponcova)
- Add DBus support for the bootloader installation tasks (vponcova)
- Add DBus support for usable disks (vponcova)
- Apply the disks selection in the partitioning modules (vponcova)
- Remove the function get_available_disks (vponcova)
- Organize actions in InteractivePartitioningTask (vponcova)
- Add DBus support for device actions (vponcova)
- Simplify ActionSummaryDialog (vponcova)
- Set up the clearpart command from the storage (vponcova)
- payload: request /usr/bin/fips-mode-setup (zbyszek)
- Fix the entry for swap in /etc/fstab (#1258322) (vponcova)
- Add DBus support for disk images (vponcova)
- Remove askmethod flag (jkonecny)
- Fix two typos (zbyszek)
- Disable updates-testing (#1670091) (vponcova)
- network module: return slaves in set and order them predictably in generated
ks (rvykydal)
- network module: update ifcfg.py unit tests for getting ifcfg file on s390
(rvykydal)
- network module: fix getting ifcfg file for s390 (rvykydal)
- network module: remove unused functionality from get_ifcfg_file (rvykydal)
- network module: unit tests for update onboot functions in ifcfg.py (rvykydal)
- network module: add TODO to ifcfg.py tests (rvykydal)
- network module: ifcfg.py tests - no need for ifcfg for vlan bound to device
(rvykydal)
- network module: add ifcfg.py unit tests (rvykydal)
- network module: do not try to generate ksdata from wireless device ifcfg
(rvykydal)
- network module: fix a typo in function name (rvykydal)
- network module: allow to generate ifcfg files in optional root (rvykydal)
- network module: fix thinko (rvykydal)
- network module: rename _ifcfg_files method (rvykydal)
- network module: fix a super call (rvykydal)
- Fix the unit tests (vponcova)
* Thu Mar 21 2019 Martin Kolman <mkolman@redhat.com> - 31.6-1
- Test the DBus support for the device tree (vponcova)
- Add DBus support for the device tree (vponcova)
- Fix the initialization of BootInfo (#1599378) (vponcova)
- network module: update module API unit tests (rvykydal)
- network module: guard some methods on NM availability (rvykydal)
- Remove useless swapoff (vponcova)
- Always specify the LUKS version in CustomPartitioningSpoke (#1689699)
(vponcova)
- Remove the property free_space_snapshot from InstallerStorage (vponcova)
- network: fix setting of NetworkDeviceInfo from NM Device (rvykydal)
- Hide the encryption checkbox for the interactive partitioning (vponcova)
- Deprecate DBusObjectObserver (vponcova)
- Remove DBusCachedObserver (vponcova)
- Add the method get_file_system_free_space to InstallerStorage (vponcova)
- Use get_disk_free_space and get_disk_reclaimable_space in StorageSpoke
(vponcova)
- Use get_disk_free_space in ResizeDialog (vponcova)
- Use get_disk_free_space in CustomPartitioningSpoke (vponcova)
- Use get_disk_free_space in SelectedDisksDialog (vponcova)
- network: adapt a unit test to get_supported_devices change (rvykydal)
- Don't estimate the free space based on the clearpart settings (vponcova)
- Update the kickstart data for iSCSI and NVDIMM during the installation
(vponcova)
- network: share single NM Client in anaconda (rvykydal)
- network: handle ONBOOT in ifcfg by network module (rvykydal)
- network: network.py cleanup (rvykydal)
- Don't generate temporary kickstart in the Storage module (vponcova)
- Remove attributes for autopart encryption from the InstallerStorage
(vponcova)
- Make invalid installation from HDD more visible (jkonecny)
- network module: fix updating of ONBOOT value on installed system (rvykydal)
- network: remove nm.py (rvykydal)
- network: use libnm to get device IP addresses (rvykydal)
- network: use libnm to get ntp servers from dhcp options (rvykydal)
- network module: provide and use GetActivatedInterfaces (rvykydal)
- network: remove unused stuff from nm.py (rvykydal)
- network: use GetSupportedDevices API (rvykydal)
- network module: provide GetSupportedDevices (rvykydal)
- Remove the encrypted_autopart property of the InstallerStorage (vponcova)
- Remove the autopart_type property of the InstallerStorage (vponcova)
- Remove the autopart_requests property of the InstallerStorage (vponcova)
- Remove the do_autopart property of the InstallerStorage (vponcova)
- Move the support for scheduling partitions to the Storage module (vponcova)
- Move do_autopart to the Storage module (vponcova)
- Move do_reqpart to the Storage module (vponcova)
- Add a new task for interactive auto partitioning (vponcova)
- Replace the function do_kickstart_storage (vponcova)
- Replace partitioning executors with tasks (vponcova)
- Move partitioning executors to the Storage module (vponcova)
- Move swap_suggestion to pyanaconda.storage.utils (vponcova)
- network: remove ifcfg.log (rvykydal)
- network module: log configuration state after installation task (rvykydal)
- network: remove low-level debug logging on IfcfgFile modifications (rvykydal)
- network module: use module for logging of configuration state (rvykydal)
- network module: move ifcfg logging into the module (rvykydal)
- network module: do not log secrets (rvykydal)
- network module: rename and add doc to network initialization task interface
(rvykydal)
- network module: guard initialization tasks by anaconda system configuration
(rvykydal)
- network: log network initialization better (rvykydal)
- network module: use task to dump missing ifcfg files (rvykydal)
- network module: use task to set real onboot values (rvykydal)
- network module: use task for initramfs connections consolidation (rvykydal)
- network module: use task for apply kickstart (rvykydal)
- payload: separate blivet.utils & blivet.arch call (jkonecny)
- Improve content of the top-level README file (mkolman)
* Tue Mar 12 2019 Martin Kolman <mkolman@redhat.com> - 31.5-1
- Don't run the storage checker to check autopart (vponcova)
- Remove the SnapshotValidateTask class (vponcova)
- Validate post-installation snapshot requests with the storage checker
(vponcova)
- Add a new type of the installation system for the initial setup (vponcova)
- Simplify update_storage_ksdata (vponcova)
- Don't set anything if the partitioning fails (vponcova)
- Reset the bootloader with reset_bootloader (vponcova)
- Add support for scanning all devices in the system (vponcova)
- Add the ExclusiveDisks property (vponcova)
- Move tests for the disk selection module to a new file (vponcova)
- Replace initialize_storage with reset_storage (vponcova)
- Remove the shutdown method (vponcova)
- payload: don't force host-only mode when executing dracut (javierm)
- Simplify the code for protected devices (vponcova)
- Define the quit message in TUI (#1686116) (vponcova)
- efi: don't include the grub2-pc package on EFI installs (javierm)
- Small optimization in boot arg parsing method (jkonecny)
- Fix bad --addrepo command line parsing (jkonecny)
- Raise correct exception on bad addrepo boot param (jkonecny)
- payload: migrate TUI software spoke to pep8 (jkonecny)
- payload: switch from CamelCase in software spoke (jkonecny)
- payload: remove unused radio button (jkonecny)
- payload: solve basic pep 8 errors (jkonecny)
* Wed Mar 06 2019 Martin Kolman <mkolman@redhat.com> - 31.4-1
- Add tests for UnsupportedPartitioningError (vponcova)
- Handle missing support for Blivet-GUI in the Storage module (#1685645)
(vponcova)
- Create the default partitioning requests on demand (vponcova)
* Tue Mar 05 2019 Martin Kolman <mkolman@redhat.com> - 31.3-1
- Fix live payload error introduced by clean-up (#1685258) (jkonecny)
* Mon Mar 04 2019 Martin Kolman <mkolman@redhat.com> - 31.2-1
- Get the summary about selected disks from a function (vponcova)
- Replace warnings about disks with constants (vponcova)
- Rename and reorganize members of the storage spoke in TUI and GUI (vponcova)
- Add tests for the Blivet partitioning module (vponcova)
- Add DBus support for Blivet-GUI (vponcova)
- Create the Blivet partitioning module (vponcova)
- Don't override bg color of gtk-themes (mate)
- Fix the import of ZFCP (#1684583) (vponcova)
- Set up the disk initialization module from the partitioned storage (vponcova)
- Move the tests for the disk initialization module (vponcova)
- Set the default filesystem type for /boot in the Storage module (vponcova)
- Replace the default autopart type in the Storage module (vponcova)
- Set the correct attribute of the bootloader kickstart data (vponcova)
- network: Get FCoE nics from the DBus module (vponcova)
- Set up the kickstart partitioning from the storage by default (vponcova)
- Get the required device size for the given space from DBus (vponcova)
- network module: remove DisableIPV6 API (rvykydal)
- network module: fix disabling of ipv6 (rvykydal)
- Fixes for pylint-2.3.0 (vponcova)
- network module: remove API for applying boot options (rvykydal)
- network: use DEVICETYPE for team when updating virtual slaves ifcfgs
(rvykydal)
- dracut/parse-kickstart: Set DEVICETYPE instead of TYPE in a team master ifcfg
file (ptalbert)
- network module: take DEVICETYPE for team into account (rvykydal)
- payload: fix pep8 errors in TUI source spoke (jkonecny)
- network: fix network spoke status message (rvykydal)
- payload: switch source spoke from CamelCase (jkonecny)
- payload: solve pep8 errors in GUI source spoke (jkonecny)
- network module: fix missing argument in a log message (rvykydal)
- network module: honor ifname boot option for kickstart %pre and missing
ifcfg (rvykydal)
* Mon Feb 25 2019 Martin Kolman <mkolman@redhat.com> - 31.1-1
- Use apply_disk_selection (vponcova)
- Use filter_disks_by_names (vponcova)
- Exclude zFCP and NVDIMM devices in is_local_disk (vponcova)
- Move code from pyanaconda.ui.lib.disks (vponcova)
- Remove the support for fake disks (vponcova)
- Add tests for the Snapshot module (vponcova)
- Remove the extra code for protecting live devices (vponcova)
- payload: switch from CamelCase in utils.py (jkonecny)
- payload: switch from CamelCase in rpmostreepayload.py (jkonecny)
- payload: switch from CamelCase in manager.py (jkonecny)
- payload: switch from CamelCase in livepayload.py (jkonecny)
- payload: switch from CamelCase in dnfpayload.py (jkonecny)
- payload: switch from CamelCase in the __init__.py (jkonecny)
- payload: move versionCmp to a separate file (jkonecny)
- payload: convert manager states to enum (jkonecny)
- payload: use ABCMeta for abstract classes (jkonecny)
- payload: move manager to a separate file (jkonecny)
- payload: remove ImagePayload abstract class (jkonecny)
- payload: move requirements code to a separate file (jkonecny)
- payload: move requirements exception to payload.errors (jkonecny)
- payload: import exceptions directly in dnf payload (jkonecny)
- payload: move exceptions to a separate file (jkonecny)
- payload: remove unused code parts (jkonecny)
- payload: fix pep8 issues (jkonecny)
- Specify the sysroot when you call the DBus method InstallWithTasks (vponcova)
- Remove the obsolete check for unknown sources (vponcova)
- network tui: guard use of NMClient by system configuration (rvykydal)
- network tui: handle device configuration in proper spoke (rvykydal)
- Use unformatted DASDs for the partitioning (vponcova)
- Fix the storage reset in TUI (vponcova)
- Use the Snapshot module in UI (vponcova)
- Use the Snapshot module in the Storage module (vponcova)
- Create a task for creation of snapshots (vponcova)
- Create a task for validation of snapshot requests (vponcova)
- Handle the command snapshot in the Snapshot module (vponcova)
- Create the Snapshot module (vponcova)
- network: rename sanityCheckHostname function (rvykydal)
- network: remove code which is no more needed/used with network module
(rvykydal)
- network ui: share some code (will be provided by module) (rvykydal)
- network gui: update model instead of recreating it on config changes
(rvykydal)
- network gui: connect to network module DeviceConfigurations (rvykydal)
- network: use NM Client for networking status message (rvykydal)
- network tui: use NetworkDeviceConfiguration structure (rvykydal)
- network tui: let network module handle updating kickstart data (rvykydal)
- network: remove no more used code (rvykydal)
- network tui: use network module and libnm (rvykydal)
- Add tests for the NVDIMM module (vponcova)
- Use the NVDIMM module in the NVDIMMDialog (vponcova)
- Create a task for the NVDIMM namespace reconfiguration (vponcova)
- Move the support for setting NVDIMM namespaces to use on DBus (vponcova)
- Move the support for updating NVDIMM actions on DBus (vponcova)
- Move the support for ignoring NVDIMM devices on DBus (vponcova)
- Create the NVDIMM module (vponcova)
* Tue Feb 19 2019 Martin Kolman <mkolman@redhat.com> - 30.25-1
- Remove one more obsolete group tag (mkolman)
* Tue Feb 19 2019 Martin Kolman <mkolman@redhat.com> - 30.24-1
- Add tests for the bootloader installation tasks (vponcova)
- Move the bootloader tests to a new file (vponcova)
- Create the DBus installation tasks for the bootloader (vponcova)
- Check for dirinstall target on s390 (bcl)
- Remove the menu_auto_hide attribute from Bootloader (vponcova)
- Remove the efi_dir attribute from EFIBase (vponcova)
- Clean up the Anaconda class (vponcova)
- Move pyanaconda.ihelp (vponcova)
- Update the stylesheet data (vponcova)
- Add tests for new methods of the Storage module (vponcova)
- Apply the partitioning in the Storage module (vponcova)
- Fix missing space in translatable string (mail)
* Wed Feb 13 2019 Martin Kolman <mkolman@redhat.com> - 30.23-1
- Reorganize the code for the boot loader installation (vponcova)
- Remove a useless argument from write_boot_loader (vponcova)
- Remove useless arguments from methods of the kickstart commands (vponcova)
- Create installation tasks for the Storage module (vponcova)
- Add tests for the custom partitioning module (vponcova)
- Create the custom partitioning module (vponcova)
- Process the btrfs command in the Storage module (vponcova)
- Remove the data from the execute method of the partitioning executors
(vponcova)
- Remove unmaintained signal handler (#1676683) (vponcova)
- Change a confusing message for headless systems (vponcova)
- Mount the file systems in a different installation task (vponcova)
- Write the escrow packets later (vponcova)
- Replace the writeStorageEarly and writeStorageLater methods (vponcova)
* Tue Feb 12 2019 Martin Kolman <mkolman@redhat.com> - 30.22-1
- Don't use the network manager client in a mock environment (vponcova)
- Don't load storage plugins in dir installations (#1674605) (vponcova)
- Test the storage configuration and validation in the Storage module
(vponcova)
- Implement configuration and validation in the partitioning modules (vponcova)
- Create the storage validation task (vponcova)
- Create the storage configuration task (vponcova)
- Create base classes for the partitioning modules (vponcova)
- Check if we can access a DBus service (vponcova)
* Thu Feb 07 2019 Martin Kolman <mkolman@redhat.com> - 30.21-1
- Drop the temporary anaconda-live dependency (mkolman)
- network module: update tests for generating dracut arguments (rvykydal)
- network_module: return set from function for getting dracut arguments
(rvykydal)
- network module: pass ifcfg to the function for getting dracut arguments
(rvykydal)
- network module: split add_connection_from_ksdata function (rvykydal)
- network module: split bind_connection function (rvykydal)
- network module: move looking for first device with link into a function
(rvykydal)
- network module: split and fix device configuration functions (rvykydal)
- network module: fix device configuration update for GUI (rvykydal)
- network module: add docstring to ifcfg.py (rvykydal)
- network module: use super() (rvykydal)
- network module: update docstrings and style of kickstart.py (rvykydal)
- network module: do not generate kickstart data for onboot value tweaking
(rvykydal)
- network module: decide better when to apply onboot policy (rvykydal)
- network module: move functions getting network data to better places
(rvykydal)
- network module: update docstrings of installation task methods (rvykydal)
- network module: remove unused return values from installation task methods
(rvykydal)
- network module: fix ONBOOT log message for installation task (rvykydal)
- network module: remove devel debugging log messages (rvykydal)
- network module: transform device configurations to structures in interface
(rvykydal)
- network module: update doc strings for DeviceConfigurations API (rvykydal)
- network module: connect DisableIPv6 to implementation signal (rvykydal)
- network module: fix generating of kickstart --activate option (rvykydal)
- network module: clean up typos and style (rvykydal)
- network module: use already existing function (rvykydal)
- Reset the storage object in the Storage module (vponcova)
- Protect devices in the Storage module (vponcova)
- Create the storage object in the Storage module (vponcova)
- Initialize Blivet in the Storage module (vponcova)
- Create a task with a result in the Baz module (vponcova)
- Allow to publish a task with a different interface (vponcova)
- Add the GetResult method (vponcova)
- Add the Succeeded signal (vponcova)
- network module: update unit tests (rvykydal)
- newtork module: put use of NM client under control of network module
(rvykydal)
- network module: use constant for nm connection uuid length (rvykydal)
- network module: use network module to get dracut arguments (rvykydal)
- network module: add support for getting dracut arguments (rvykydal)
- network module: support renaming of devices with ifname= boot option
(rvykydal)
- network module: generate kickstart from network module (rvykydal)
- network module: set current hostname using network module directly (rvykydal)
- network module: remove dependency of configuration task on nm_client
(rvykydal)
- network module: use module task for network configuration writing (rvykydal)
- network module: ifcfg.py cleanup (rvykydal)
- network module: dump missing ifcfg files via network module (rvykydal)
- network module: add support for dumping missing ifcfg files (rvykydal)
- network module: set real ONBOOT values via network module (rvykydal)
- network module: add support for updating ONBOOT ifcfg value (rvykydal)
- network module: apply kickstart via network module (rvykydal)
- network module: fix list of devices for which kickstart was applied
(rvykydal)
- network module: work with ifcfg file objects, not paths (rvykydal)
- network module: set bootif kickstart value from boot options (rvykydal)
- network module: provide apply_kickstart (rvykydal)
- network module: consolidate initramfs connections via Network module
(rvykydal)
- network module: provide initramfs connections consolidation (rvykydal)
- network module: set default value for missing network --device from ksdevice.
(rvykydal)
- network module: handle default network --device value (rvykydal)
- network module: handle hostname only network commands correctly (rvykydal)
- network module: use DBus Structure for DeviceConfiguration (rvykydal)
- network module: provide dbus API for DeviceConfigurations (rvykydal)
- network module: fix looking up vlan parent if specified by UUID (rvykydal)
- network module: fix kickstart generating for vlan interface name (rvykydal)
- network module: generate kickstart data from DeviceConfigurations (rvykydal)
- network module: add a module providing NM.Client (rvykydal)
- network module: connect DeviceConfigurations to signals from NM (rvykydal)
- network module: add DeviceConfigurations for persistent config state
(rvykydal)
* Wed Feb 06 2019 Martin Kolman <mkolman@redhat.com> - 30.20-1
- Remove obsolete Group tag & obsolete scriptlets (mkolman)
- Move the write method of the InstallerStorage class (vponcova)
- Clean up the reset method of the InstallerStorage class (vponcova)
- Allow non-ASCII characters in passphrases again (#1619813) (vponcova)
- Remove the argument protected from initialize_storage (vponcova)
- Remove multiboot support for tboot (javierm)
- Move the code for ignoring disks labeled OEMDRV (vponcova)
- Set default entry to the BLS id instead of the entry index (javierm)
- Remove the ksdata argument from the initialize_storage function (vponcova)
- Remove the ksdata attribute from the InstallerStorage class (vponcova)
- Move the code for ignoring nvdimm devices to pyanaconda.storage.utils
(vponcova)
- Use new ssl certificate kickstart options (lars)
- Remove the data argument from the do_autopart function (vponcova)
- Call refreshAutoSwapSize from the do_autopart function (vponcova)
- Move getAvailableDiskSpace to pyanaconda.storage.utils (vponcova)
- Move lookupAlias to pyanaconda.storage.utils (vponcova)
- Move getEscrowCertificate to pyanaconda.storage.utils (vponcova)
- Move get_ignored_nvdimm_blockdevs to pyanaconda.storage.utils (vponcova)
- Remove update_ksdata from the InstallerStorage class (vponcova)
- Remove obsolete ldconfig scriptlets (mkolman)
- Do not try to use disks without partition slots for autopart (vtrefny)
- dracut: Add deps for fetch-kickstart-disk (walters)
* Mon Jan 28 2019 Martin Kolman <mkolman@redhat.com> - 30.19-1
- Move code for the storage creation (vponcova)
- Move code for the storage initialization (vponcova)
- Remove the GRUB class (javierm)
- Remove support for deprecated bootloaders (javierm)
- Spelling fix in Boot Options documentation (josephvoss14)
- Put 'lock' checkbox under 'Confirmation field' (frederic.pierret)
- Don't create an extra instance of the bootloader (vponcova)
- Remove the preStorage method in payload (vponcova)
- Use LUKS2 by default (vponcova)
- Clean up the space checkers (#1520749) (vponcova)
- Don't show time and date controls in live installations (#1510425) (vponcova)
- anaconda: add option to lock root account (frederic.epitre)
* Mon Jan 21 2019 Martin Kolman <mkolman@redhat.com> - 30.18-1
- Relabel X11/xorg.conf.d directory (#1666892) (jkonecny)
- Reorder items in selinux relabeling post script (#1666892) (jkonecny)
- Fix jumping boxes in root password spoke (jkonecny)
- Move the execute method of the bootloader command (vponcova)
- Remove ksdata from the execute method of the bootloader command (vponcova)
- Move writeBootLoader to pyanaconda.bootloader.installation (vponcova)
- Move EXTLINUX to pyanaconda.bootloader.extlinux (vponcova)
- Move ZIPL to pyanaconda.bootloader.zipl (vponcova)
- Move Yaboot to pyanaconda.bootloader.yaboot (vponcova)
- Move EFIBase to pyanaconda.bootloader.efi (vponcova)
- Move GRUB2 to pyanaconda.bootloader.grub2 (vponcova)
- Move GRUB to pyanaconda.bootloader.grub (vponcova)
- Move Bootloader to pyanaconda.bootloader.base (vponcova)
- Move BootLoaderImage to pyanaconda.bootloader.image (vponcova)
- Create the pyanaconda.bootloader module (vponcova)
- Tweak tests documentation (jkonecny)
- Fix requires in dependency solver (jkonecny)
- Remove the unused method add_re_check (vponcova)
- Remove the unused attribute _lHome (vponcova)
- Remove the unused attribute _actionStore (vponcova)
- Remove unused constants ERROR_WEAK and ERROR_NOT_MATCHING (vponcova)
- Remove the unused attributes _repoNameWarningBox and _repoNameWarningLabel
(vponcova)
- Remove the unused attribute _configureBox (vponcova)
- Remove the unused attribute _addDisksButton (vponcova)
- Remove the unused attribute orig_fstab (vponcova)
- Remove the unused attribute ignore_disk_interactive (vponcova)
- Remove the unused class TarPayload (vponcova)
- Remove the unused method environmentGroups (vponcova)
- Remove the unused exception NoSuchPackage (vponcova)
- Remove the unused function get_locale_territory (vponcova)
- Remove the unused variable upgrade_log (vponcova)
- Remove unused classes RegexpCheck and FunctionCheck (vponcova)
- Remove the unused property check_request (vponcova)
- Remove the unused constant PASSWORD_DONE_TO_CONTINUE (vponcova)
- Remove the unused constant SECRET_MIN_LEN (vponcova)
- Remove the unused variable bugzillaUrl (vponcova)
- Remove the unused attribute stage1_device_types (vponcova)
- Move attributes from the Blivet class to Anaconda (vponcova)
- Remove the Blivet's gpt flag (vponcova)
- Set Automatic Installation Media for HDD not ISO (jkonecny)
- Adapt old code to new partition name translation (jkonecny)
- Fix source spoke status for expanded tree on HDD (jkonecny)
- Enable installation from install tree on HDD (jkonecny)
- Remove the unused class IPSeriesYaboot (vponcova)
- Fix the name of the attribute stage2_device_raid_levels (vponcova)
- Remove the useless attribute stage2_max_end_mb (vponcova)
- Remove the unused attribute problems (vponcova)
- Remove the unused logger to stderr (vponcova)
- Move the code from format_by_default to the storage checker (vponcova)
- Move the code from must_format to the storage checker (vponcova)
* Wed Jan 09 2019 Martin Kolman <mkolman@redhat.com> - 30.17-1
- Fix anaconda-live package temporary Requires: (mkolman)
- Add a new configuration option allow_imperfect_devices (vponcova)
- Remove the selinux flag (vponcova)
- Rename the Services section (vponcova)
- Fix Arm EFI package selection and 32 bit status (pbrobinson)
- Remove support for the undocumented option force_efi_dir (vponcova)
- Remove the flag extlinux (vponcova)
- Remove the flag nombr (vponcova)
- Remove the flag leavebootorder (vponcova)
- Remove the flag nonibftiscsiboot (vponcova)
* Tue Jan 08 2019 Martin Kolman <mkolman@redhat.com> - 30.16-1
- Use the file system type provided by Blivet by default (#1663585) (vponcova)
- Move remaining GUI related files to anaconda-gui (mkolman)
- Create anaconda-live sub-package (mkolman)
- Don't acquire the imp's lock (#1644936) (vponcova)
* Thu Jan 03 2019 Martin Kolman <mkolman@redhat.com> - 30.15-1
- Remove install classes from the code (vponcova)
- Remove files with install classes (vponcova)
- Use the Anaconda configuration to configure the storage (vponcova)
- Use the Anaconda configuration to configure the bootloader (vponcova)
- Use the correct name of the variant AtomicHost (vponcova)
- Use the Anaconda configuration to configure payload (vponcova)
- Use the Anaconda configuration to configure network devices (vponcova)
- Use the Anaconda configuration to customize the user interface (vponcova)
- Use the Anaconda configuration to show EULA (vponcova)
- Use the Anaconda configuration to detect unsupported hardware (vponcova)
- Remove the kickstart command installclass (vponcova)
- Fix the anaconda documentation (vponcova)
- Add support for inst.product and inst.variant (vponcova)
- Use the product configuration files in Anaconda (vponcova)
* Wed Jan 02 2019 Martin Kolman <mkolman@redhat.com> - 30.14-1
- Require password confirmation in GUI (#1584064) (mkolman)
- Run zipl again after generating initramfs (#1652727) (vponcova)
- Preserve the boot option zfcp.allow_lun_scan (#1561662) (vponcova)
- Don't allow /boot on LVM (#1641986) (vponcova)
- The encoding should be always set to UTF-8 (#1642857) (vponcova)
- Make sure fips is correctly enabled on target system (#1619568) (mkolman)
- Remove workaround for bd_s390_dasd_online (vponcova)
- Clean up /run/install (#1562239) (vponcova)
- Make it possible to exit empty user spoke (#1620135) (mkolman)
- Don't allow to use LDL DASD disks (#1635825) (vponcova)
- Remove initThreading method from pyanaconda.threading (vponcova)
- Drop the inst.noblscfg option (javierm)
* Tue Dec 04 2018 Martin Kolman <mkolman@redhat.com> - 30.13-1
- Extend tests for the configuration support (vponcova)
- Split the Anaconda configuration handler to more files (vponcova)
- Add tests for the product configurations (vponcova)
- Read only *.conf files from /etc/anaconda/conf.d (vponcova)
- Create the product configuration loader (vponcova)
- Disable BLS config if new-kernel-pkg script is installed (javierm)
- Drop xorg-x11-server-Xorg check from graphical target detection (#1583958)
(mkolman)
- Create a basic structure of the product configuration files (vponcova)
- Fix pylint errors (vponcova)
- dracut/parse-kickstart: don't abort on --device=link (lkundrak)
- Add provides_network_config system property (rvykydal)
- Get rid of network system capability which does not make sense. (rvykydal)
- Prohibit network configuration on Live OS. (rvykydal)
- Use check_supported_locales to filter unsupported locales (vponcova)
- Replace filterSupportedLangs and filterSupportedLocales (vponcova)
- Remove help-related constants from install classes (vponcova)
- Remove setup_on_boot from the install classes (vponcova)
- Convert a keymap into a list of layouts (vponcova)
- RPM: anaconda-core requires dbus-daemon (awilliam)
- Remove use_geolocation_with_kickstart from install classes (vponcova)
* Thu Nov 22 2018 Martin Kolman <mkolman@redhat.com> - 30.12-1
- Simplify the task Activate filesystems (vponcova)
- Remove the flag livecdInstall (vponcova)
- Overwrite network configuration for the live image payload (vponcova)
- Write tests for the installation system configuration (vponcova)
- Resolve the name conflicts in exception.py (vponcova)
- Use the Anaconda configuration in the network module (vponcova)
- Revert "Don't try to get hostnamed proxy in non-installer-image environments
(#1616214)" (vponcova)
- Remove the function can_touch_runtime_system (vponcova)
- Add rules for the installation system (vponcova)
- Configure the installation system (vponcova)
- Replace setNetworkOnbootDefault (vponcova)
- Add tests for the FCoE module (vponcova)
- Discover an FCoE device with a DBus task (vponcova)
- Reload the FCoE module on the storage reset (vponcova)
- Let the FCoE module to provide the dracut arguments (vponcova)
- Let the FCoE module to write the configuration (vponcova)
- Move kickstart support to the FCoE module (vponcova)
- Create the basic structure for the FCoE module (vponcova)
* Mon Nov 19 2018 Martin Kolman <mkolman@redhat.com> - 30.11-1
- Install grubby-deprecated when using the extlinux bootloader (javierm)
- Remove configurePayload (vponcova)
- Resolve the name conflicts with conf (vponcova)
- Write tests for the target support (vponcova)
- Simplify the code (vponcova)
- Replace the dirInstall flag (vponcova)
- Replace the imageInstall flag (vponcova)
- Configure the installation target (vponcova)
- Write tests for the default partitioning (vponcova)
- Define the default partitioning statically (vponcova)
- Remove l10n_domain from the install classes (vponcova)
- Re-generate BLS loader file snippets on live installs (#1648472) (awilliam)
- Remove the attribute bootloaderTimeoutDefault (vponcova)
- Remove the attribute bootloaderExtraArgs (vponcova)
- Remove the method setPackageSelection (vponcova)
- Remove the setStorageChecker method (vponcova)
- Remove the getBackend method (vponcova)
- Add doc to make a release in a mock environment (jkonecny)
- Support in our scripts creating release in a mock (jkonecny)
- Add dependencies to make a new release to dependency_solver (jkonecny)
* Tue Nov 06 2018 Martin Kolman <mkolman@redhat.com> - 30.10-1
- Make the pyanaconda/image.py more pep8 (jkonecny)
- Test image repodata folder based on treeinfo file (jkonecny)
- Use var instead of strings in findFirstIsoImage (jkonecny)
- Use new InstallTreeMetadata instead of TreeInfo (jkonecny)
- Add InstallTreeMetadata class (jkonecny)
- Move DEFAULT_REPOS to the constants (jkonecny)
- Don't check for firmware compatibility to enable BootLoaderSpec support
(javierm)
- Update kernel command line parameters in BLS files (javierm)
- Add support for GRUB_ENABLE_BLSCFG and inst.noblscfg (pjones)
- Get rid of new-kernel-pkg invocations (pjones)
- Minor pylint cleanups (pjones)
* Mon Nov 05 2018 Martin Kolman <mkolman@redhat.com> - 30.9-1
- Load configuration files from /etc/anaconda/conf.d (vponcova)
- Let the DBus launcher to set up the modules (vponcova)
- Start modules that are enabled in the configuration file (vponcova)
- Enable the DBus modules and addons via the configuration file (vponcova)
* Thu Nov 01 2018 Jiri Konecny <jkonecny@redhat.com> - 30.8-1
- Remove flags from anaconda_logging (vponcova)
- Remove blivet-specific flags from pyanaconda.flags (vponcova)
- The armplatform option is deprecated (vponcova)
- Create a class for the Anaconda bus connection (vponcova)
- Fix local repo files aren't enabled (#1636739) (jkonecny)
- Write RPM tests for the Anaconda configuration file (vponcova)
- Write tests for the configuration support (vponcova)
- Create a class for handling the Anaconda configuration (vponcova)
- Provide a better support for handling the configuration files (vponcova)
- Create the Anaconda configuration file (vponcova)
* Thu Oct 18 2018 Martin Kolman <mkolman@redhat.com> - 30.7-1
- installclass: fix variant string for Atomic Host (#1640409) (dusty)
- Remove EXPERIMENTAL label for mountpoint assignment in TUI (#1636940)
(mkolman)
* Mon Oct 15 2018 Martin Kolman <mkolman@redhat.com> - 30.6-1
- nvdimm: update ks data for actions in UI (rvykydal)
- nvdimm: use pykickstart constant for setting reconfigure mode (rvykydal)
- Revert "Don't allow booting from nvdimm devices" (rvykydal)
- Add --no-pip to setup-mock-test-env script (jkonecny)
- Fix error message in setup-mock-test-env script (jkonecny)
- Add shortcut function to get dependency script (jkonecny)
- Add install-pip parameter to setup-mock-test-env (jkonecny)
- Small optimalization in setup-mock-test-env (jkonecny)
- Add package installation from pip for test script (jkonecny)
- Fix wrong pylint false positive regex (jkonecny)
* Mon Oct 08 2018 Martin Kolman <mkolman@redhat.com> - 30.5-1
- Adjust to some DNF 3.6 changes (#1637021) (mkolman)
- Ignore errors when trying to activate unsupported swaps (#1635252) (vtrefny)
- Add option to set kernel.hung_task_timeout_secs option (rvykydal)
- Move the glade adaptor to a separate plugin (dshea)
* Wed Oct 03 2018 Martin Kolman <mkolman@redhat.com> - 30.4-1
- Fix strings not marked for translation (jkonecny)
- Drop attempt to add 'nocrypto' to tsflags (awilliam)
- Fix librepo logging with new DNF (jkonecny)
- Revert "Remove librepo imports from Anaconda (#1626609)" (jkonecny)
- Set the VNC password directly (#1592686) (vponcova)
- Update the spoke for unsupported hardware in TUI (#1601545) (vponcova)
- Update the dialog for unsupported hardware in GUI (#1601545) (vponcova)
- Support detection of kernel taints (vponcova)
- Fix the rescue mode (#1631749) (vponcova)
- Fix the sanity check verify_gpt_biosboot (#1593446) (vponcova)
- Flags shouldn't process the kernel options (vponcova)
- Fully support the inst.gpt option (vponcova)
- Don't set Anaconda-specific flags in Blivet (vponcova)
- Remove the class for kernel arguments from pyanaconda.flags (vponcova)
- Remove unused false positives (vponcova)
- Don't connect to signals of the Network Manager DBus objects (#1582233)
(vponcova)
- Fix documentation for setting Pykickstart command version (mkolman)
- Don't try to get hostnamed proxy in non-installer-image environments
(#1616214) (rvykydal)
- Use realm data in UI (vponcova)
- Use realm data in the DBus module (vponcova)
- Create a DBus structure for realm data (vponcova)
- Add support for DBus structures (vponcova)
- docs/commit-log.rst: Don't wrap example firstlines (ferdnyc)
- Detect that there is not enough space on a device (#1613232) (vponcova)
- Add Silverblue InstallClass (jkonecny)
* Tue Sep 11 2018 Martin Kolman <mkolman@redhat.com> - 30.3-1
- Save lsblk output to the Anaconda traceback file (vtrefny)
- Remove librepo imports from Anaconda (#1626609) (jkonecny)
- DNF 3.5 compatibility (mkolman)
- Use the default LUKS version for auto partitioning (#1624680) (vponcova)
- Remove the testing flag (vponcova)
* Thu Aug 30 2018 Martin Kolman <mkolman@redhat.com> - 30.2-1
- Add initial 32-bit ARMv7 EFI support (pbrobinson)
- Drop legacy get_arm_machine pieces (pbrobinson)
- arch: arm: drop omap checks and specifics (pbrobinson)
* Mon Aug 27 2018 Martin Kolman <mkolman@redhat.com> - 30.1-1
- Fix the processing of the live CD source (#1622248) (vponcova)
* Wed Aug 22 2018 Martin Kolman <mkolman@redhat.com> - 29.24-1
- Fix crash in tui when default partitioning scheme is not supported.
(rvykydal)
- Fix pylint errors (vponcova)
- Add libtool build dependency (jkonecny)
- Remove shebang from DUD test (jkonecny)
- Add inst.addrepo documentation for HD variant (jkonecny)
- Warn when repo names are not unique (jkonecny)
- HD addon repos have mount directories permanent (jkonecny)
- Unmount hard drive additional repositories (jkonecny)
- Move RepoData copy creation to the RepoData class (jkonecny)
- Show empty file protocol on HD addon repo fail (jkonecny)
- Mount and use HDD additional repositories (jkonecny)
- Separate _find_and_mount_iso from _setup_media (jkonecny)
- Load hard drive repo type from inst.addrepo (jkonecny)
- Do not fail if .discinfo file can't be read (jkonecny)
- Use productmd to parse .discinfo file (jkonecny)
- Add payload sources tests (jkonecny)
- Cleanup payload tests source file (jkonecny)
- Add documentation for inst.addrepo boot option (jkonecny)
- Add additional repositories to KS data (jkonecny)
- Use new source solution (jkonecny)
- Add payload sources implementation (jkonecny)
- Don't resize a device if the size is same as the old size (#1572828)
(vponcova)
- Mark disks with additional repos as protected (jkonecny)
- Support boot args parsing to list (jkonecny)
- Add inst.addrepo new options (jkonecny)
- Make parenthesis consistent (jkonecny)
- Remove unused parameter from live_startup method (jkonecny)
- Disable treeinfo based repos only once (jkonecny)
- Disable treeinfo repos when base repo change (jkonecny)
- Treeinfo repos can't be changed nor removed (jkonecny)
- Add all repositories from the treeinfo file (jkonecny)
- Load base repository location from treeinfo (jkonecny)
- Add limited file:// protocol to GUI Source spoke (jkonecny)
- Add BaseOS between default base repositories (jkonecny)
- Split _setupInstallDevice method in payload (jkonecny)
- Check the LUKS2 memory requirements (vponcova)
- Add an option for choosing version of LUKS in GUI (vponcova)
- Add tests for LUKS2 in the auto partitioning module (vponcova)
- Apply the LUKS2 options from the auto partitioning module (vponcova)
- Support LUKS2 options in the auto partitioning module (vponcova)
- Support LUKS2 options in logvol, part and raid commands (vponcova)
- Enable to set a default version of LUKS (vponcova)
- Update dependencies and kickstart commands to support LUKS2 (#1547908)
(vponcova)
- Revert back to running DNF in a subprocess (mkolman)
- Use SimpleConfigFile to get PLATFORM_ID from /etc/os-release (mkolman)
- Fix a 5 year old typo in the spec file (mkolman)
- Use wwn attr instead of removed wwid. (#1565693) (dlehman)
* Tue Aug 07 2018 Martin Kolman <mkolman@redhat.com> - 29.23-1
- Bump required DNF version (mkolman)
- Fix some small issues with the platform id patch (mkolman)
- Set platform id for DNF (mkolman)
- Fix crash when software environment is False (jkonecny)
- Allow to delete all file systems used by Unknown (#1597199) (vponcova)
- DD: Use text mode when calling tools with subprocess (rvykydal)
- Update RHEL placeholder names (mkolman)
- Typo fixup (rvykydal)
- Define if blivet-gui is supported via installclasses (rvykydal)
- Offer Blivet-GUI partitioning only if supported (rvykydal)
- Only show the "closest mirror" source option where appropriate (mkolman)
- Starting from 3.0 DNF expects strings in comps queries (mkolman)
- Use the manual partitioning module in TUI (vponcova)
- Use the manual partitioning module in UI (vponcova)
- Add tests for the manual partitioning module (vponcova)
- Create the manual partitioning module (vponcova)
- Reserve enough static space for 2 lines in spoke status on hub (#1584160)
(rvykydal)
- Fix disable additional repositories (jkonecny)
- Show better messages for NoSuchPackage and NoSuchGroup (#1599190) (vponcova)
- Bootloader stage2 can't be on btrfs on rhel (#1533904) (rvykydal)
* Fri Jul 27 2018 Martin Kolman <mkolman@redhat.com> - 29.22-1
- Handle new module specific error states (mkolman)
- Handle missing package errors reported by the install_specs() function
(mkolman)
- Initial module enablement and installation support (mkolman)
- Use productmd library to parse .treeinfo (#1411673) (jkonecny)
- Import kickstart classes as version-less in the dracut script (vponcova)
- Use only version-less kickstart classes (vponcova)
- Define version-less variants of kickstart classes (vponcova)
* Wed Jul 25 2018 Martin Kolman <mkolman@redhat.com> - 29.21-1
- Pylint should skip the file livepayload.py (vponcova)
- Fix pylint errors (vponcova)
- Change the pop-up text with the pre-release warning (#1542998) (vpodzime)
- Sort categories on the hub by defined order (#1584160) (rvykydal)
- Show a note about EULA where relevant (mkolman)
- Change message log level to INFO when adding repo (jkonecny)
- Set packaging log level to DEBUG by default (jkonecny)
- Remove the python-wrapt dependency (vponcova)
- Do not use capitals for spoke names (#1584160) (rvykydal)
- Wrap category label and add space between columns (#1584160) (rvykydal)
- Use 32 px icons (instead of 16 px) on hubs (#1584160) (rvykydal)
- Replace deprecated dracut options for booting with ibft. (rvykydal)
- Improve handling of unsupported filesystems in UI. (rvykydal)
- Reserve two lines for status message (#1584160) (rvykydal)
- Use three spoke columns on hub for better scaling (#1584160) (rvykydal)
* Wed Jul 18 2018 Martin Kolman <mkolman@redhat.com> - 29.20-1
- Make pyanaconda.dbus.typing work with Python 3.7 (#1598574) (awilliam)
- Protected devices might be hidden (#1561766) (vponcova)
- fstab: include a note about systemctl daemon-reload (zbyszek)
- Access the ZFCP module only on s390x (vponcova)
- Tell libreport if it is a final release or not (#1596392) (vpodzime)
- bootloader: GRUB2: Set menu_auto_hide when enabled by the instClass
(hdegoede)
- installclass: Add bootloader_menu_autohide property (hdegoede)
- Add tests for the zFCP module (vponcova)
- Handle the zfcp command in the zFCP module (vponcova)
- Use the zFCP discovery task in UI (vponcova)
- Create the zFCP discovery task (vponcova)
- Create the zFCP module (vponcova)
* Wed Jun 27 2018 Martin Kolman <mkolman@redhat.com> - 29.19-1
- DNF 3: progress callback constants moved to dnf.transaction (awilliam)
- DNF 3: Update size calculations for transaction item changes (awilliam)
- DNF 3: config substitutions moved from dnf to libdnf (awilliam)
* Mon Jun 25 2018 Martin Kolman <mkolman@redhat.com> - 29.18-1
- Add tests for the DASD module (vponcova)
- Run the DASD formatting task in UI (vponcova)
- Extend the sync_run_task method with a callback (vponcova)
- Create a task for formatting DASDs (vponcova)
- Run the DASD discovery task from UI (vponcova)
- Create a task for discovering DASDs (vponcova)
- Create the DASD module (vponcova)
- Add tests for the language installation task (vponcova)
- Run an installation task to install a language (vponcova)
- nvdimm: fix crash on non-block devices (rvykydal)
* Tue Jun 12 2018 Martin Kolman <mkolman@redhat.com> - 29.17-1
- Wait for kickstart modules to quit (vponcova)
- Ask for a default passphrase if required (vponcova)
- Add support for setting different types of passwords in TUI (vponcova)
* Thu Jun 07 2018 Martin Kolman <mkolman@redhat.com> - 29.16-1
- Add tests for changes in tasks and the install manager (vponcova)
- Add a simple installation task in the Baz module (vponcova)
- Update the boss classes (vponcova)
- Update the base clases for modules (vponcova)
- Use the system installation task in the install manager (vponcova)
- Add the system installation task (vponcova)
- Add methods for running remote DBus tasks (vponcova)
- Improved base clases for DBus tasks (vponcova)
- Do not manually create LUKSDevice when unlocking a LUKS format (vtrefny)
- Fix pylint errors (vponcova)
- Skip the pylint check for the bootloader.py (vponcova)
- Enable DNF depsolver debugging in debug mode (mkolman)
- Don't reset locale of our DBus daemon (vponcova)
- Close the DNF base later (#1571299) (vponcova)
- Add 10% for storage metadata to the total required space (#1578395)
(vponcova)
- Add hook to prevent mistake upstream pushes (jkonecny)
- Revert "WIP" (vponcova)
- WIP (vponcova)
- Set locale to en_US.UTF-8 in every module (#1575415) (vponcova)
- Move initial module configuration to the init function (vponcova)
- Fix the mount command (vponcova)
- Use the auto partitioning module in UI (vponcova)
- Only check space during a tui kickstart if ksprompt is enabled (bcl)
- Fix can't exit TUI storage spoke (jkonecny)
- Use PROCESSED_AND_CLOSE and PROCESSED_AND_REDRAW (jkonecny)
- Remove not required PROCESSED return (jkonecny)
- Remove PROCESSED from refresh method (jkonecny)
* Wed May 16 2018 Martin Kolman <mkolman@redhat.com> - 29.15-1
- nvdimm: make debug messages more clear (rvykydal)
- nvdimm: use libblockdev enum to check namespace mode (rvykydal)
- Add data loss warning to nvdimm reconfigure dialog. (rvykydal)
- Add UI feedback for disk repopulating after nvdimm reconfiguration.
(rvykydal)
- Fix ignoring of nvdimm devices (rvykydal)
- Don't allow booting from nvdimm devices (rvykydal)
- Improve UI feedback for invalid boot on non-iBFT iSCSI devices. (rvykydal)
- Add inst.nonibftiscsiboot boot option. (rvykydal)
- Use only devices specified by nvdimm command for installation. (rvykydal)
- Add option to reconfigure nvdimm devices into sector mode. (rvykydal)
- Allow only devices in sector mode to be selected. (rvykydal)
- Add nvdimm devices to Advanced Storage spoke. (rvykydal)
- Add kickstart support for nvdimm reconfiguration to sector mode. (rvykydal)
- Ignore nvdimm disks which are not in sector mode. (rvykydal)
- Do not ignore nvdimm (pmemX) devices (rvykydal)
- Update the pykickstart commands (vponcova)
- Fix firewall DBUS module API usage (#1577405) (mkolman)
- Fix formatting in the TUI storage spoke (jkonecny)
- Fix TUI crash in mountpoint assignment (#1564067) (jkonecny)
- Fix KS logvol metadata and chunksize parameters (#1572511) (jkonecny)
- Show correct bootloader error on the MacEFI platform (vponcova)
- Revert "Fix broken kickstart command test" (rvykydal)
- Support fcoe --autovlan option (#1564096) (rvykydal)
* Fri May 04 2018 Martin Kolman <mkolman@redhat.com> - 29.14-1
- Increase module startup timeout to 600 seconds (mkolman)
- Fix name of the Zanata Python client package (mkolman)
- Add tests for the auto partitioning module (vponcova)
- Create the auto partitioning module (vponcova)
- Add the firewall submodule (mkolman)
- Once again fix cmdline error handling. (#1360223) (sbueno+anaconda)
- Extend the timeout period to 180s in the case of cmdline error. (#1360223)
(sbueno+anaconda)
- Fix the clearpart test with disklabel option (vponcova)
- The specified nosetests failed to run (vponcova)
* Tue Apr 24 2018 Martin Kolman <mkolman@redhat.com> - 29.13-1
- Show correct root account locked status in reconfig mode (#1507940) (mkolman)
- Add missing lines and modularization only log to test coverage (jkonecny)
- Remove makebumpver dependency from spec file (jkonecny)
- network module: use connectivity checking in anaconda (rvykydal)
- network module: add connectivity checking (rvykydal)
- Permit adding disabled external repos to installation. (riehecky)
- Handle empty active attribute for consoles (#1569045) (mkolman)
- Support temporary kickstart generating (vponcova)
- Create the dynamic module User (vponcova)
- Select Workstation install class for Workstation live (#1569083) (awilliam)
- Rename the main module User to Users (vponcova)
* Thu Apr 19 2018 Martin Kolman <mkolman@redhat.com> - 29.12-1
- Save logs to result folder after rpm-tests (jkonecny)
- Add Installed pyanaconda tests (jkonecny)
- Fix name of the RPM test (jkonecny)
- Support running just chosen rpm test (jkonecny)
- Add test cache files to gitignore (jkonecny)
- Move test install test from Makefile to rpm tests (jkonecny)
- Create structure to run rpm tests (jkonecny)
- Move all nosetests to separate directory (jkonecny)
- Fix broken kickstart command test (jkonecny)
- Fix broken kickstart command test (jkonecny)
- localization: use LanguageKickstarted module property (#1568119) (rvykydal)
- Start only the specified kickstart modules (#1566621) (vponcova)
- Use the Bootloader module in UI (vponcova)
- Add tests for the bootloader module (vponcova)
- Create the bootloader module (vponcova)
- rpmostreepayload: do not require network for dvd installation (#1565369)
(rvykydal)
- Fix double logging to stdout (vponcova)
- Don't try to create required partitions if there are none (vponcova)
* Thu Apr 12 2018 Martin Kolman <mkolman@redhat.com> - 29.11-1
- Add anaconda-install-env-deps as dependency of the anaconda package (mkolman)
- Add %files for install-env-deps so it actually exists (awilliam)
* Tue Apr 10 2018 Martin Kolman <mkolman@redhat.com> - 29.10-1
- Bump simpleline version (mkolman)
- Do not redraw screen after text YesNo dialog (#1557951)(jkonecny)
- Revert "Adapt to a new simpleline changes (#1557472)(jkonecny)
- authselect: enable silent last log (pbrezina)
- authselect: fix typo to enable fingerprint authentication (pbrezina)
* Mon Apr 09 2018 Martin Kolman <mkolman@redhat.com> - 29.9-1
- Move install time dependencies to a metapackage (mkolman)
* Thu Apr 05 2018 Martin Kolman <mkolman@redhat.com> - 29.8-1
- Fix forgotten usage of the selinux kickstart command (vponcova)
- Fix tests for the storage module (vponcova)
- Use the disk selection and initialization modules in UI (vponcova)
- Enable to use object identifiers instead of object paths (vponcova)
* Thu Mar 29 2018 Martin Kolman <mkolman@redhat.com> - 29.7-1
- Add Makefiles for disk initialization and selection modules (vponcova)
- Remove the invalid self argument (vponcova)
- Run all unit tests (vponcova)
* Tue Mar 27 2018 Martin Kolman <mkolman@redhat.com> - 29.6-1
- Create the disk initialization and disk selection modules (vponcova)
- Use watch_property to watch changes of DBus properties (vponcova)
- Better organize the base classes for modules (vponcova)
- Fixed KS forcing zerombr onto RO disk (japokorn)
- Add tests for the kickstart specifications (vponcova)
- Standardize calls to parent via super() (riehecky)
- Fix 'isDisk' property name (#1558906) (vtrefny)
- Make the class for removed kickstart commands more strict (vponcova)
- Fix the progress bar steps (vponcova)
- Use enum for the first boot action (vponcova)
- Use enum for the SELinux modes (vponcova)
- datetime spoke: still pass ksdata to NTPconfigDialog (UIObject) (rvykydal)
* Mon Mar 19 2018 Martin Kolman <mkolman@redhat.com> - 29.5-1
- Write rootpw command to kickstart (#1557529) (mkolman)
- Don't make safe to observe services on buses that don't run (vponcova)
- Add the LanguageKickstarted property (vponcova)
- Don't autoquit by default if the last hub is empty (#1553935) (mkolman)
- Use the Services module in UI (vponcova)
- Create the Services module (vponcova)
- Enable hibernation only on x86 (#1554345) (vponcova)
- Add the Storage module with no API (vponcova)
- Add the Payload module with no API (vponcova)
- Remove DBus modules Foo and Bar (vponcova)
- network module: fix accessing org.freedesktop.hostname1 for current hostname
(rvykydal)
* Mon Mar 12 2018 Martin Kolman <mkolman@redhat.com> - 29.4-1
- network module: add basic test (rvykydal)
- Add prepare command to setup-mock-test-env script (jkonecny)
- Mark partition live device's disk protected. (#1524700) (dlehman)
* Fri Mar 09 2018 Martin Kolman <mkolman@redhat.com> - 29.3-1
- Remove useless constants from pyanaconda.dbus.constants (vponcova)
- Use identifiers to get observers and proxies (vponcova)
- Remove the publish method from DBus interfaces (vponcova)
- Replace constants in publish and register methods (vponcova)
- Replace constants in DBus interface names (vponcova)
- Define DBus errors with the dbus_error decorator (vponcova)
- Use namespaces and identifiers to describe Anaconda DBus objects (vponcova)
- Add support for identification of DBus objects and services (vponcova)
- User module should parse only rootpw for now (#1553488) (vponcova)
- localization module: plug localization module into keyboard GUI spoke
(rvykydal)
- localization module: add KeyboardKickstarted property (rvykydal)
- localization module: add KS support for keyboard command (rvykydal)
- localization module: don't use Kickstarted so another command can be added
(rvykydal)
- Fix release docs (mkolman)
- network: set TYPE value in ifcfg from kickstart in initrmfs (rvykydal)
- Make formatting consistent in AnacondaWidgets.xml (riehecky)
* Mon Mar 05 2018 Martin Kolman <mkolman@redhat.com> - 29.2-1
- Use the user DBUS module in the UI (mkolman)
- Use the user DBUS module for the rootpw command in kickstart.py (mkolman)
- Add initial user DBUS module (mkolman)
- Add tests for the Security module (vponcova)
- Use the Security module in UI (vponcova)
- Don't send empty kickstart to DBus modules (vponcova)
- Add the Security module (vponcova)
- Fix makeupdates script to work with new DBus structure (jkonecny)
- Fix Makefile of the kickstart manager (vponcova)
- Fix check if dbus daemon quit properly (jkonecny)
- Remove check if dbus is running (#1551096) (jkonecny)
- Use Anaconda's special env variable for dbus address (#1551096) (jkonecny)
- Migrate Anaconda to our private dbus session (#1551096) (jkonecny)
- localization module: use l12 shortcut for module name in UI (rvykydal)
- localization module: replace ksdata.lang with the module in anaconda.
(rvykydal)
- localization module: add KS support for lang command (rvykydal)
- Return restorecon utility to Fedora 28 mock (jkonecny)
- Include dbus.log when exporting logs (mkolman)
- Reorganize pyanaconda.modules.boss (vponcova)
- Move all DBus errors to pyanaconda.modules.common.errors (vponcova)
- Move common classes and functions to pyanaconda.modules.common (vponcova)
- Close DBus log file when quitting DBus session (jkonecny)
- Enable payload configuration for Install classes (jkonecny)
- Rename files that provide kickstart specifications (vponcova)
- Move the kickstart specification to pyanaconda.core.kickstart (vponcova)
- Start and quit Boss properly (jkonecny)
- Make class from dbus.launcher module (jkonecny)
- Add the kernel option resume= by default (#1206936) (vponcova)
* Wed Feb 28 2018 Martin Kolman <mkolman@redhat.com> - 29.1-1
- Use observers to access the hostname service (vponcova)
- Make safe to observe services on buses that don't have to run (vponcova)
- DBus logs are now saved to /tmp/dbus.log (jkonecny)
- Add tests for toplevel installclass attribs (riehecky)
- Wait for DBus modules for longer time (vponcova)
- Drop dependency on authselect and firewalld (vponcova)
- Fix kickstart version test (vponcova)
- Authconfig is replaced with authselect (#1542968) (vponcova)
- Add support for different message buses (vponcova)
- Fix makeupdates script (vponcova)
- Set up basic logging for DBus modules (vponcova)
- Remove get_dbus_module_logger (vponcova)
- Fix logging of the DBus modules (vponcova)
- Fix the reimport error (vponcova)
- Fix the network module specification (vponcova)
- network module: update_network_data test (rvykydal)
- network module: use Module.Kickstarted instead of ksdata.seen (rvykydal)
- network module: use for hostname in tui (rvykydal)
- network module: handle current hostname (rvykydal)
- network module: handle ksdata.network.hostname (rvykydal)
- network module: add module skeleton (rvykydal)
- Log changes in the kickstart modules. (vponcova)
- Use the Timezone module in UI. (vponcova)
- Start Boss from Anaconda (jkonecny)
- Do not use System DBus (jkonecny)
- Remove anaconda-boss.service (jkonecny)
- Move Anaconda dbus services and confs to session dbus (jkonecny)
- Run DBus session if not present (jkonecny)
- Change pykickstart version (vponcova)
- Move system-logos dependency from anaconda-core to anaconda-gui (mkolman)
- makebumpver: fix parsing of -m option (rvykydal)
- makebumpver: fix -i option (rvykydal)
- Fix tests of the Timezone module (vponcova)
- installclass: add comments to server install class (dusty)
- Don't use deprecated formatErrorMsg (vponcova)
- Use the KickstartError attributes (vponcova)
- kickstart: "clearpart --list" does not work (#1410335) (marcel)
- Use handler in the Timezone module (vponcova)
- Fix the specification of the Bar module (vponcova)
- Use the KickstartHandler class (vponcova)
* Mon Feb 19 2018 Martin Kolman <mkolman@redhat.com> - 28.22-1
- Prevent anaconda-core requiring gjs-console (awilliam)
- Temporarily don't test versions of specified kickstart objects (vponcova)
* Mon Feb 19 2018 Martin Kolman <mkolman@redhat.com> - 28.21-1
- Explain when run dependency_solver without options (jkonecny)
- Clean dd_test code (jkonecny)
- We can't set file permission mode for .so in dd test (jkonecny)
- Rename installclass_atomic to Fedora Atomic Host (jkonecny)
- Support running only nosetests or only some nosetests (jkonecny)
- Do not run tests as root (jkonecny)
- Save start and end time for pylint run (jkonecny)
- Separate grab-logs from ci target in Makefile (jkonecny)
- Remove false positive but disable Pylint in makeupdates script (jkonecny)
- Add copyright to scripts in ./scripts/testing (jkonecny)
* Thu Feb 15 2018 Adam Williamson <awilliam@redhat.com> - 28.20-2
- Prevent anaconda-core requiring gjs-console (awilliam)
* Fri Feb 09 2018 Martin Kolman <mkolman@redhat.com> - 28.20-1
- Check the proxy attribute before accessing it (vponcova)
- Check the noverifyssl attribute before accessing it (vponcova)
- Don't access the url attribute (#1530428) (vponcova)
- Use Fedora Server default partitioning in Atomic (jkonecny)
- Clean code of Atomic install class (jkonecny)
- Migrate Atomic install class (#1491287) (jkonecny)
- Move Atomic install class to Anaconda (#1491287) (#1536853) (jkonecny)
- Make sure that fetch_url is defined. (vponcova)
* Mon Feb 05 2018 Martin Kolman <mkolman@redhat.com> - 28.19-1
- Change pykickstart version. (vponcova)
- Do not deepcopy the kickstart data in the storage (vponcova)
- Replace deepcopy of the method command (vponcova)
- Use pykickstart 3 (vponcova)
- Provide comprehensive log messages about the display mode (vponcova)
- Fix missing logging in some cases of update of ONBOOT value. (rvykydal)
- Fix tests for the timezone module. (vponcova)
- Add the Kickstarted property to the kickstart modules. (vponcova)
- Connect to the observed service and other stuff. (vponcova)
- Prevent 99-copy-lgs.ks from exiting with a 1 (bcl)
- Rename SetUTC to SetIsUTC in the timezone module. (vponcova)
* Thu Jan 18 2018 Martin Kolman <mkolman@redhat.com> - 28.18-1
- Move how to use setup-mock-test-env script to help (jkonecny)
- Add --init as new parameter to setup-mock-test-env (jkonecny)
- Initialize the thread manager at the first import. (vponcova)
- Added tests for the timezone module and other. (vponcova)
- Remove 'i' from iutil module (jkonecny)
- Remove 'i' from isignal module (jkonecny)
- Move isignal module to core/isignal (jkonecny)
- Extract process watch functions to a static class (jkonecny)
- Move regexes module to core/regexes (jkonecny)
- Move i18n module to core/i18n (jkonecny)
- Move constants module to core/constants (jkonecny)
- Move iutil module to core/iutil (jkonecny)
- Move async_utils to core/async_utils (jkonecny)
- Replace gobject GLib by our core/glib (jkonecny)
- Rename run_in_main_thread to run_in_loop (jkonecny)
- Add Timer and PidWatcher abstraction above GLib (jkonecny)
- Create abstraction above GLib event loop (jkonecny)
- Add core/glib module for GLib access (jkonecny)
- Ignore errors for KickstartSpecificationHandler. (vponcova)
- Try to use the PropertiesChanged signal. (vponcova)
- Add timezone module. (vponcova)
- Collect properties changes before emit. (vponcova)
- Use Ping method from the standard interface. (vponcova)
- Recognize members of standard interfaces. (vponcova)
- Add an object observer with cached properties (vponcova)
- Rename modules with Fedora install classes. (vponcova)
- Add support for Variant in .buildstamp (vponcova)
- Fix the Bar module. (vponcova)
- Add pykickstart version to branching policy doc (jkonecny)
- Remove `unstable` branch from documentation (jkonecny)
- Move system-logos to anaconda-core (#1529239) (bcl)
* Fri Jan 05 2018 Martin Kolman <mkolman@redhat.com> - 28.17-1
- Modules should use the proxy pattern. (vponcova)
- Variants need to be instances of the Variant class (vponcova)
- kickstart: support firewall --use-system-defaults (#1526450) (dusty)
- Check payload is set before accessing its data (#1524785) (mkolman)
- Do not fail when test are failing in setup-env script (jkonecny)
- Support running multiple commands at once (jkonecny)
- Support copy Anaconda result dir out of mock (jkonecny)
- Remove dependencies from Makefile (jkonecny)
- Add path to Anaconda in mock to constant (jkonecny)
- Properly exclude packages from the install set (ngompa13)
- Add the _prepare_command helper function to setup-test-env (jkonecny)
- Add run-tests parameter to setup-test-env script (jkonecny)
- Remove /anaconda in mock before copying new one (jkonecny)
* Tue Jan 02 2018 Martin Kolman <mkolman@redhat.com> - 28.16-1
- Improve password checking status and error messages (mkolman)
- Spin kickstarts shouldn't be test dependency (jkonecny)
* Wed Dec 20 2017 Martin Kolman <mkolman@redhat.com> - 28.15-1
- Remove spurious echo call from tmux service file (#1526861) (mkolman)
- Restore fix for RHBZ #1323012 (`set_name` not `setName`) (awilliam)
- Fix Makefile for modules/[foo,bar]/tasks and for install_manager (rvykydal)
- Make passing kickstart to boss more visible. (rvykydal)
- Add tests for KickstartManager. (rvykydal)
- Add kickstart dispatching to anaconda. (rvykydal)
- Add kickstart dispatching to local boss run script (rvykydal)
- Add KickstartManager for Boss. (rvykydal)
- Add method for getting line mapping from kickstart elements to kickstart
(rvykydal)
- Add info about handled kickstart commands to modules (rvykydal)
- Add missing Makefile for kickstart_dispatcher (rvykydal)
* Mon Dec 18 2017 Martin Kolman <mkolman@redhat.com> - 28.14-1
- Use observers in the install manager (vponcova)
- Modify readme file for tests (jkonecny)
- Do not bump version when testing installation (jkonecny)
- Add set up test environment script (jkonecny)
- Add dependency solver script (jkonecny)
- Differentiate upstream and build-time version (#1493952) (mkolman)
- Fix bad bash '*' expansion when loading kernel modules (#1525841) (jkonecny)
- Fix connection to a signal in the install manager (vponcova)
- Use the InterfaceTemplate in the InstallationInterface (vponcova)
- Use the InterfaceTemplate in the TaskInterface (vponcova)
- Add a base class for DBus interfaces (vponcova)
- Update module manager to use observers (vponcova)
- Add DBus observers for better access to proxies. (vponcova)
- Remove running CI in mock from Makefile (jkonecny)
- Add xfsprogs and git to the test requirements (jkonecny)
- The gettext-devel is required by autogen (jkonecny)
- Remove kickstart-test dependencies from test requires (jkonecny)
* Tue Dec 12 2017 Martin Kolman <mkolman@redhat.com> - 28.13-1
- Unregister and unpublish all DBus services and objects (vponcova)
- Add tests for InstallManager (jkonecny)
- Add tests for Tasks (jkonecny)
- Add run_in_glib decorator for tests (jkonecny)
- Instantiate and publish InstallManager in Boss (jkonecny)
- Add Makefile for install_manager (jkonecny)
- Implement InstallManager with interface (jkonecny)
- Init threading in modules (jkonecny)
- Provide installation tasks from modules (jkonecny)
- Remove *.Anaconda.Modules interface from Boss (jkonecny)
- Implementing example tasks for modules (jkonecny)
- Add Makefile for Task (jkonecny)
- Base implementation of Task (jkonecny)
- Add Task interface class (jkonecny)
- Remove in-memory kickstart representation from traceback file (#1519895)
(mkolman)
- Support call_when_thread_terminates in ThreadManager (jkonecny)
- Change gtk_action_wait/nowait as general use decorators (jkonecny)
- Add controllable loop to run_boss_locally script (jkonecny)
- Tweak run_boss_locally script (jkonecny)
- Enable SE/HMC file access to repo (vponcova)
- Change string formatting to format method (jkonecny)
- Pass handler instance, not class to SplitKickstartParser (rvykydal)
- Add kickstart parser for splitting kickstart (rvykydal)
* Thu Dec 07 2017 Martin Kolman <mkolman@redhat.com> - 28.12-1
- Fix unit tests (mkolman)
- Fixes in makefiles (vponcova)
- Use the input_checking module for TUI password validation (mkolman)
- Use the input_checking module for user checking (mkolman)
- Use the input_checking module for root password checking (mkolman)
- Use the input_checking module for checking the LUKS passphrase (mkolman)
- Reflect GUISpokeInputCheckHandler changes in installation source spoke
(mkolman)
- Convert the input checking helpers to use the input_checking module (mkolman)
- Provide more robust method of using the warning message bar (mkolman)
- Remove the validatePassword() method (mkolman)
- Add new input checking module (mkolman)
- fixup! Migrate Workstation InstallClass to anaconda (sgallagh)
- Handle an invalid install class style sheet (vponcova)
- Enhance password checking constants (mkolman)
- Fix interactive defaults (mkolman)
- Modify the PYTHONPATH in run_boss_locally (vponcova)
- Replace get_bus with the class DBus (vponcova)
- Migrate Workstation InstallClass to anaconda (sgallagh)
- Point at new path for fedora-server.css (sgallagh)
- Rename dbus_constants to constants (vponcova)
- Add the boot option inst.ks.all (vponcova)
- Add the boot option inst.stage2.all (vponcova)
- Remove errors for mounting and unmounting (vponcova)
- Override the right method in the task (vponcova)
- Remove useless code (vponcova)
- Support timeout and retries options in %packages section (vponcova)
- Fix device_name_is_disk to fully support raid devices (vponcova)
- Onlyuse devices of the ignoredisk command should be only disks (vponcova)
- Add the boot option inst.xtimeout (vponcova)
- Do not shadow build-in module variable (jkonecny)
- Module manager is replaceable (jkonecny)
- Remove pyanaconda.constants_text module (vponcova)
* Mon Nov 27 2017 Martin Kolman <mkolman@redhat.com> - 28.11-1
- Bump Blivet GUI version (mkolman)
- Change path to start-module script when running locally (mkolman)
- Handle DBUS module related files in makeupdates (mkolman)
- Handle DBUS_STARTER_ADDRESS not being defined (mkolman)
- Use start-module script in DBUS service files (mkolman)
- Add a DBUS module startup script (mkolman)
- Add Makefile.am for DBUS modules an addons (mkolman)
- Add the setup-updates script (mkolman)
- Add __init__.py file to anaconda/modules (mkolman)
- Add a unit file for Boss startup (mkolman)
- Really install all the right packages on Mac UEFI installs (awilliam)
- Refactor DASD formatting and support detection of LDL DASDs. (vponcova)
- Remove unused import sys from run_boss_locally script (jkonecny)
- Fix blivet imports in the Fedora Server install class (#1513024) (vponcova)
- Update the use of suggest_container_name method (vponcova)
- Devicetree doesn't have protected_dev_names (vponcova)
- Add pyanaconda.dbus to Makefile (vponcova)
- Add pyanaconda.storage to Makefile (#1511735) (vponcova)
- network: GUI, be more robust when displaying vlan parent and id (#1507913)
(rvykydal)
- network: GUI, fix lookup of existing device configurations (#1507913)
(rvykydal)
- network: GUI, don't crash on added vlan without device name specified
(#1507913) (rvykydal)
- Add a script for running Boss & modules locally (mkolman)
- Add an example addon (mkolman)
- Add DBUS module examples (mkolman)
- Add Boss (mkolman)
- Add a base class for DBUS modules (mkolman)
- Add .service and .conf files for the DBUS modules (mkolman)
- Add constants for DBUS module namespaces (mkolman)
- Add support for logging from DBUS modules (mkolman)
- Add the get_bus() method (mkolman)
- Remove storage check for too small swap (#1466964) (vponcova)
- Migrate fedora-server installclass into the anaconda repository (#1466967)
(rvykydal)
* Thu Nov 09 2017 Martin Kolman <mkolman@redhat.com> - 28.10-1
- Bump required Blivet version to 3.0 (mkolman)
- Add modular server repo to the base repositories (#1506894) (jkonecny)
- Split addon and environment refresh in software TUI (jkonecny)
- Fix changing source don't erase old environment TUI (#1505090) (jkonecny)
- Add logging to TUI software selection spoke (#1505090) (jkonecny)
- Do not try to use protected disks for autopart (vtrefny)
- Adapt new storage tui spoke to storage code move. (dlehman)
- Update blivet upstream URL in testing README. (dlehman)
- Adapt to devicefactory API change. (dlehman)
- Adapt to removal of default rounding in blivet.size.Size. (dlehman)
- Use anaconda's logic for ostree sys/physical root. (dlehman)
- Adapt to removal of blivet.udev.device_is_realdisk. (dlehman)
- Adapt to move of disklabel type logic into DiskLabel. (dlehman)
- Move blivet.partspec into pyanaconda.storage. (dlehman)
- Move blivet.platform to pyanaconda.platform. (dlehman)
- Fix traceback from mocked partitions in clearpart test. (dlehman)
- Move blivet.osinstall to pyanaconda.storage. (dlehman)
- Move autopart from blivet to pyanaconda.storage. (dlehman)
* Thu Oct 26 2017 Martin Kolman <mkolman@redhat.com> - 28.9-1
- Mac EFI installs need grub2-tools (#1503496) (awilliam)
- network: create default ifcfg also for missing default NM connection
(#1478141) (rvykydal)
- Print screen stack next to exception in TUI (jkonecny)
- Enable Custom GRUB2 Password Utility (#985962) (rmarshall)
* Tue Oct 17 2017 Martin Kolman <mkolman@redhat.com> - 28.8-1
- Bump simpleline version requires (jkonecny)
- Remove DataHolder class (jkonecny)
- Remove EditTUISpoke EditTUIDialog and EditTUISpokeEntry (jkonecny)
- Replace EditTUI* from the TUI Storage spoke (jkonecny)
- Replace EditTUI* from the TUI User spoke (jkonecny)
- Replace EditTUI* from the TUI Source spoke (jkonecny)
- Replace EditTUI* from the TUI Network spoke (jkonecny)
- Password spoke is using PasswordDialog now (jkonecny)
- Return default policy if nothing match (jkonecny)
- Add Dialog and PasswordDialog TUI objects (jkonecny)
- Remove EditTUIDialog from time_spoke (jkonecny)
- packaging: clear downloaded packages repo cache before using it (#1480790)
(rvykydal)
- Do substitutions only after translating the string (mkolman)
- Fix a translation check error (mkolman)
- Do not run commands in messages in Makefile (jkonecny)
- Fix storage spoke completeness checking (#1496416) (rvykydal)
* Thu Oct 12 2017 Martin Kolman <mkolman@redhat.com> - 28.7-1
- Mark the mount point assignment in TUI as experimental (vpodzime)
- Reset storage on change in text mode (vpodzime)
- Only allow the supported file systems in text mode (vpodzime)
- Textual configuration of mount points (vpodzime)
- Add support for the new 'mount' kickstart command (vpodzime)
- Fix dnf exception repository not set (#1495211) (jkonecny)
- Add logging of complete spokes in GUI. (rvykydal)
- Do not execute storage when the spoke is left with no selected disk
(#1496327) (rvykydal)
- Reflect building from master branch in the release docs (mkolman)
- Add checks for group names (#1497676) (vponcova)
- Add new checks for user names (#1491006) (vponcova)
* Fri Sep 29 2017 Martin Kolman <mkolman@redhat.com> - 28.6-1
- Add changelog entries from the unstable branch (mkolman)
- Log when we are executing command in chroot (jkonecny)
- Use name instead of index in TUI env selection (#1495204) (jkonecny)
- Fix missing container in TUI source spoke (#1494801) (jkonecny)
- Add MOCK_EXTRA_ARGS to Makefile (jkonecny)
- tui source spoke: initialize nfs values when switching to nfs (rvykydal)
- Deselect encryption when switching to blivet-gui partitioning (vtrefny)
- Add 2 spaces between functions in iutil (jkonecny)
- rpmostreepayload: Fix logic for copying of EFI data (walters)
- rpmostreepayload: Avoid recursing for fstab mounts (walters)
- payload: Add handlesBootloaderConfiguration(), teach bootloader.py (walters)
* Thu Sep 21 2017 Martin Kolman <mkolman@redhat.com> - 28.5-1
- Fix missing id to name environment transition (#1491119) (jkonecny)
- Fix test for unset TUI software environment (#1491119) (jkonecny)
- Rename processingDone to processing_done variable (jkonecny)
* Mon Sep 18 2017 Martin Kolman <mkolman@redhat.com> - 28.4-1
- network: add support for kickstart --bindto=mac for virtual devices
(#1328576) (rvykydal)
- network: support mac bound network settings as first class (#1328576)
(rvykydal)
- network: add support for kickstart --bindto=mac for wired devices (#1328576)
(rvykydal)
- Don't setup the hub twice (#1491333) (vponcova)
- rpmostreepayload: Substitute ${basearch} in ostreesetup ref (walters)
- Perform repo checks only when there are checks available. (rvykydal)
- Add support for repo --metalink (GUI) (#1464843) (rvykydal)
- Add support for repo --metalink (kickstart, tui) (#1464843) (rvykydal)
- Add inst.notmux option (dusty)
* Mon Sep 11 2017 Martin Kolman <mkolman@redhat.com> - 28.3-1
- Add missing dot to the availability status message (mail)
- Bump Simpleline version (jkonecny)
- Make EFIGRUB._efi_binary a property, not a method (awilliam)
- Better storing logs from build and tests (jkonecny)
- Provide a default install class. (vponcova)
- Do not use hidden install classes. (vponcova)
- Make geolocation with kickstart possible (#1358331) (mkolman)
- Run python-meh as modal in TUI (jkonecny)
- Use GLib event loop in the simpleline (jkonecny)
- TUI progress reporting is handled by show_all (jkonecny)
- Add efi_dir to the BaseInstallClass (#1412391) (vponcova)
- Use /usr/bin/python3 shebang once again (miro)
* Mon Sep 04 2017 Martin Kolman <mkolman@redhat.com> - 28.2-1
- Fix catch TUI not main thread exceptions (jkonecny)
- Document Anaconda branching workflow (mkolman)
- Use constants for version number bumps and additions (mkolman)
- Fix closest mirror now needs network (jkonecny)
- Fix restart payload thread in Network spoke GUI (#1478970) (jkonecny)
- Network spoke freeze when testing availability (#1478970) (jkonecny)
- Add support for adding version numbers to makebumpver (mkolman)
- Add support for major version bump to makebumpver (mkolman)
- Fix proxy settings badly used when testing repos (#1478970) (jkonecny)
* Tue Aug 29 2017 Martin Kolman <mkolman@redhat.com> - 28.1-1
- Remove the metacity theme. (vponcova)
- Add the option inst.decorated to allow title bar in GUI (vponcova)
- Move python3-gobject Requires to core (jkonecny)
- Return simpleline removed ipmi calls back (jkonecny)
- Use new list container from Simpleline (jkonecny)
- Remove old simpleline from anaconda (jkonecny)
- Ask multiple times for wrong input (jkonecny)
- Show TUI exception only first time (jkonecny)
- Add simpleline logger to the Anaconda (jkonecny)
- Modify TUI to use new Simpleline package (jkonecny)
- Make 64-bit kernel on 32-bit firmware work for x86 efi machines (pjones)
- Add missing gtk3 required version to spec file (jkonecny)
- Sort spec required versions alphabetically (jkonecny)
- Fix testing of the kickstart version (vponcova)
- Move the installclass command to the %anaconda section. (vponcova)
- Fix SL install class to use right efi dir (riehecky)
- Fix accelerator key for blivet-gui partitioning (#1482438) (vtrefny)
- Add blivet-gui logs to python-meh file list (vtrefny)
- Remove the title bar in anaconda by default (#1468801) (vponcova)
- Add simple script to read journal with message code source and thread info.
(rvykydal)
* Mon Aug 14 2017 Martin Kolman <mkolman@redhat.com> - 27.20-1
- Add support for automatic generating of DBus specification. (vponcova)
- Add support for generating XML (vponcova)
- Add support for DBus typing system (vponcova)
- dnfpayload: do not try to contact disabled repo (artem.bityutskiy)
- Add message to setup-test-env is ran (jkonecny)
- Use SHA256 instead of MD5 for repoMDHash (#1341280) (bcl)
- Add lorax-packages.log to bug report. (rvykydal)
- Use SHA256 instead of MD5 for repoMDHash (#1341280) (jkonecny)
- 80-setfilecons: Add a few paths (/var/run, /var/spool) (walters)
- Also capture anaconda-pre logs if they exist (riehecky)
- Don't mock modules with sys in unit tests (vponcova)
- logging: replace SyslogHandler with JournalHandler (rvykydal)
- Add setup-test-env target to the Makefile (jkonecny)
- Add tests for the install class factory (vponcova)
- Support for the installclass kickstart command (vponcova)
- Modules with install classes should define __all__ (vponcova)
- Refactorization of the installclass.py (vponcova)
- docs: minor fixups of release document (rvykydal)
- rescue: add RTD documentation (rvykydal)
- rescue: clean up method for mounting root (rvykydal)
- rescue: separate UI and execution logic (rvykydal)
- Make kickstart rescue command noninteractive. (rvykydal)
- Remove unused argument and code. (rvykydal)
* Thu Jul 27 2017 Radek Vykydal <rvykydal@redhat.com> - 27.19-1
- rpmostreepayload: Set up /var first (walters)
- rpmostreepayload: Explicitly create /var/lib before tmpfiles (walters)
- rpmostreepayload: Rework mount setup to support admin-defined mounts
(walters)
- rpmostreepayload: try to verify local ostree repo cache (dusty)
- rpmostreepayload: ignore <F25 location, support RHEL (dusty)
- rpmostreepayload: use correct secondary url location (dusty)
- Add tracking of requirements application to requirements container.
(rvykydal)
- Add langpacks via payload requirements (rvykydal)
- Add NTP_PACKAGE via installation requirements (rvykydal)
- timezone: simplify kickstart setup metod (rvykydal)
- Store payload (packages, groups) requirements in a container. (rvykydal)
- Fix anaconda --help fail with traceback (#1470514) (jkonecny)
- rpmostreepayload: Do /sysroot mount non-recursively (walters)
- Add isolated-test makefile target (jkonecny)
- gui: show supported locales on Atomic Host installs (jlebon)
* Mon Jul 03 2017 Martin Kolman <mkolman@redhat.com> - 27.18-1
- rpmostreepayload: Reuse the local repo as a cache (walters)
- Document how to create Anaconda releases and package builds (mkolman)
* Sat Jul 01 2017 Martin Kolman <mkolman@redhat.com> - 27.17-1
- Require "blivet-gui-runtime" instead of "blivet-gui" (vtrefny)
- Fix a typo in python-meh initialization (#1462825) (mkolman)
* Mon Jun 26 2017 Martin Kolman <mkolman@redhat.com> - 27.16-1
- Install class shouldn't set the default boot fstype (#1463297) (vponcova)
- Store testing logs properly (jkonecny)
- Fix location of the blivet-gui user help (vtrefny)
- netowrk: fix noipv6 option check regression (#1464297) (rvykydal)
- Refactor imports in kickstart.py (jkonecny)
- Use context manager to check KickstartError (jkonecny)
* Wed Jun 21 2017 Martin Kolman <mkolman@redhat.com> - 27.15-1
- Honor --erroronfail kickstart option in cmdline mode (rvykydal)
- Fix import from a renamed module (#1462538) (vponcova)
- Fix the 'non-ASCII characters in password' checks (#1413813) (awilliam)
- Move mock config files to slaves (jkonecny)
* Thu Jun 15 2017 Martin Kolman <mkolman@redhat.com> - 27.14-1
- Bump version of Pykickstart and Blivet (#1113207) (jkonecny)
- Add XFS uuid changer (#1113207) (jkonecny)
- Support --when parameter in snapshot (#1113207) (jkonecny)
- Add snapshot support (#1113207) (jkonecny)
* Wed Jun 14 2017 Martin Kolman <mkolman@redhat.com> - 27.13-1
- Fix source.glade renaming mixup (#1461469) (mkolman)
- Separate blivet-daily builds in mock config (jkonecny)
- network: bind to device name (not hwaddr) when dumping connections (#1457215)
(rvykydal)
* Tue Jun 13 2017 Martin Kolman <mkolman@redhat.com> - 27.12-1
- Show warning if swap is smaller then recommended (#1290360) (vponcova)
* Tue Jun 06 2017 Martin Kolman <mkolman@redhat.com> - 27.11-1
- Fix renaming error (mkolman)
- Add a getter for the Anaconda root logger (mkolman)
- Disable test-install in Makefile (jkonecny)
* Thu Jun 01 2017 Martin Kolman <mkolman@redhat.com> - 27.10-1
- Bump Blivet version (mkolman)
- Remove GUI logging prefixes from Network spoke (mkolman)
- Rename TUI spokes (mkolman)
- Rename GUI spokes (mkolman)
- Rename anaconda_argparse.py to argument_parsing.py (mkolman)
- Rename install_tasks.py to installation_tasks.py (mkolman)
- Rename install.py to installation.py (mkolman)
- Rename threads.py to threading.py (mkolman)
- Get special purpose loggers from anaconda_loggers (mkolman)
- Use structured logging in Anaconda modules (mkolman)
- Use unique 3 letter log level names (mkolman)
- Use constants for special purpose logger names (mkolman)
- Add the anaconda_loggers module (mkolman)
- Rename anaconda_log.py to anaconda_logging.py (mkolman)
- Add support for structured logging to the anaconda logger (mkolman)
- Make it possible to set filters for file handlers (mkolman)
- Add custom filter and formatter support for the syslog handler (mkolman)
- Add AnacondaPrefixFilter (mkolman)
- Fixes for Pylint 1.7 (vponcova)
- Add support for IPoIB in tui (#1366935) (rvykydal)
- Fix pylint unused import error (jkonecny)
- network: handle multiple connections for one device better (#1444887)
(rvykydal)
- Fix setting errors and warnings in the StorageCheckHandler (vponcova)
- Add inst.waitfornet option (#1315160) (rvykydal)
- network: catch exception when reading in-memory connection being removed
(#1439220) (rvykydal)
* Thu May 25 2017 Martin Kolman <mkolman@redhat.com> - 27.9-1
- Add support for DNF-2.5.0 (jkonecny)
- Fix simpleline_getpass related Pylint warning (mkolman)
- Provide access to simpleline App instance (mkolman)
- Make it possible to use a custom getpass() (mkolman)
- Set the default filesystem type from a kickstart file (vponcova)
- Adapt to our new daily builds of Anaconda (jkonecny)
- Provide access to simpleline App instance (mkolman)
- Make it possible to use a custom getpass() (mkolman)
- Perform recursive copying of driver disk RPM repo contents (esyr)
- network: fix setting hostname via boot options (#1441337) (rvykydal)
- Fix a typo in an error message (esyr)
- Use the function we already have for applying disk selection (#1412022)
(rvykydal)
- Ignore disks labeled OEMDRV (#1412022) (rvykydal)
- network: create dracut arguments for iSCSI root accessed via vlan (#1374003)
(rvykydal)
- Test if Anaconda can be installed inside of mock (jkonecny)
- Remove run_install_test test (jkonecny)
- rpmostreepayload: Handle /var as a user-specified mountpoint (walters)
- Fix the addon handlers for the checkbox (#1451754) (vponcova)
- Show the text of completions in the datetime spoke. (vponcova)
- Use new daily-blivet copr builds (jkonecny)
- Prevent TUI from crashing with a single spoke on a hub (mkolman)
* Tue May 09 2017 Martin Kolman <mkolman@redhat.com> - 27.8-1
- Bump Pykickstart version (mkolman)
* Fri May 05 2017 Martin Kolman <mkolman@redhat.com> - 27.7-1
- Make some missed adjustments to blivet API changes. (#1440134) (dlehman)
- Bump required version for blivet-gui (vtrefny)
- BlivetGuiSpoke: Set keyboard shortcuts for blivet-gui (#1439608) (vtrefny)
- BlivetGuiSpoke: Refresh blivet-gui UI after spoke is entered (vtrefny)
- Really fix with tmux 2.4 (version comparison was busted) (awilliam)
- Show or hide the content of the expander on Fedora (vponcova)
- itertools.chain can be iterated only once (#1414391) (vponcova)
* Fri Apr 28 2017 Martin Kolman <mkolman@redhat.com> - 27.6-1
- Use `time.tzset()` to apply timezone changes when we can (awilliam)
- Tweak epoch definition to fix system clock setting (#1433560) (awilliam)
- Optimize payload thread restart on network change (jkonecny)
- Add unit test for RepoMDMetaHash object (#1373449) (jkonecny)
- Make the formating in payload consistent (#1373449) (jkonecny)
- Fix Anaconda forces payload restart when network (not)change (#1373449)
(jkonecny)
- Catch race-condition error reading from in-memory connection being removed
(#1373360) (rvykydal)
- network tui: fix changing ipv4 config from static to dhcp (#1432886)
(rvykydal)
- Allow setting up bridge for fetching installer image from kickstart
(#1373360) (rvykydal)
* Thu Apr 27 2017 Martin Kolman <mkolman@redhat.com> - 27.5-1
- make anaconda working back again with tmux2.4 (pallotron)
- Trigger the entered signal only once the screen is shown (#1443011) (mkolman)
- Use constants in storage checker constraints. (vponcova)
- Gtk: Fix creating images from resources. (vponcova)
- Fix partial kickstart software selection in GUI (#1404158) (jkonecny)
- Removed unused code in the Software spoke (#1404158) (jkonecny)
- Fix selection logic in Software spoke (#1404158) (jkonecny)
- Fix Driver Disc documentation (#1377233) (jkonecny)
- Support DD rpm loading from local disk device (#1377233) (jkonecny)
- Gtk: Replace deprecated get_misc_set_alignment in widgets. (vponcova)
- Gtk: Replace deprecated Gtk.Viewport.get_v/hadjustment. (vponcova)
- Gtk: Replace deprecated methods. (vponcova)
- Set the info bar only once if the partitioning method changes. (vponcova)
- Fix pylint issue Catching too general exception Exception (jkonecny)
- Support --noboot and --noswap options in autopartitioning (#1220866)
(vponcova)
- Support --nohome option in the autopartitioning (vponcova)
* Tue Apr 11 2017 Martin Kolman <mkolman@redhat.com> - 27.4-1
- Hide options based on storage configuration method (#1439519) (mkolman)
- Catch exception when reading from in-memory connection being removed
(#1439051) (rvykydal)
- docs/boot-options.rst: Fix #dhcpd anchor (mopsfelder)
- docs/boot-options.rst: Remove trailing spaces (mopsfelder)
- Fix logging of the storage checker report. (vponcova)
- Fix a property name of luks devices in storage checking (#1439411) (vponcova)
- Bump required version for blivet-gui (vtrefny)
- Use newly created swaps after the installation (#1439729) (vtrefny)
- docs/boot-options.rst: Fix #dhcpd anchor (mopsfelder)
- docs/boot-options.rst: Remove trailing spaces (mopsfelder)
- Set default FS type for blivet-gui (#1439581) (vtrefny)
- Display progress for the post installation phase (mkolman)
- Display progress for the post installation phase (mkolman)
- Increase verbosity of lvmdump in pre logging script (#1255659) (jkonecny)
* Thu Mar 30 2017 Martin Kolman <mkolman@redhat.com> - 27.3-1
- Enable the install class to customize the storage checking (vponcova)
- Replace sanity check with more advanced storage checker (vponcova)
- Various log-capture script improvements (mkolman)
- Rename StorageChecker to StorageCheckHandler (vponcova)
* Thu Mar 16 2017 Martin Kolman <mkolman@redhat.com> - 27.2-1
- Correction of some typographic mistakes in documentation. (rludva)
- Fix bullet point formatting in contribution guidelines (mkolman)
- Propagate firstboot --disable to Screen Access Manager (mkolman)
- util: Add script to capture logs (riehecky)
- Fix a typo (mkolman)
- Correction of some typographic mistakes in documentation. (rludva)
- Enhance git-find-branch script (jkonecny)
- Improve how storage configuration settings are displayed (mkolman)
- util: Add script to capture logs (riehecky)
- Propagate firstboot --disable to Screen Access Manager (mkolman)
* Mon Mar 06 2017 Martin Kolman <mkolman@redhat.com> - 27.1-1
- We should not have pyanaconda submodules on PYTHONPATH (vponcova)
- Lock empty root password during kickstart installation (#1383656) (mkolman)
- Use system Python when running Anaconda (mkolman)
- Remove unused false positives for pylint (vtrefny)
- Fix pylint error in BlivetGUI spoke (vtrefny)
- Fix tests by renaming packaging to payload (jkonecny)
- Rescue mode should wait for the storage and luks devices (#1376638) (vponcova)
* Mon Feb 27 2017 Martin Kolman <mkolman@redhat.com> - 26.21-1
- Add blivet-gui as requirement for the GUI package (vtrefny)
- Add a bottom bar to the Blivet GUI spoke (mkolman)
- Hide storage config spokes marked by SAM as visited (mkolman)
- Keep last used partitioning method selected (mkolman)
- Rollback planned storage changes if partitioning method changes (mkolman)
- Add blivet-gui spoke (vpodzime)
- docs: fix formating a bit for Links (Frodox)
- Fix a typo (mkolman)
- Polish unsupported filesystems in the custom spoke (jkonecny)
* Tue Feb 07 2017 Martin Kolman <mkolman@redhat.com> - 26.20-1
- Update dracut test for network --ipv6gateway (rvykydal)
- Correctly propagate --ipv6gateway to ifcfg files(#1170845) (mkolman)
- network: respect --activate value for bridge from kickstart (rvykydal)
- network: fix --activate for bridge slaves configured via %pre ks (rvykydal)
- network: activate bridge for first network command in ks via %pre (rvykydal)
- network: unify slave connection names for ks %pre with ks and gui (rvykydal)
- network: bind slave connections to DEVICE, not HWADDR (#1373360) (rvykydal)
- Do not allow creating ntfs filesystem in custom spoke (vtrefny)
- Various minor formatting fixes (mkolman)
- PEP8 and refactoring for packaging (mkolman)
- PEP8 and refactoring for vnc.py (mkolman)
- PEP8 and refactoring for storage_utils.py (mkolman)
- PEP8 and refactoring for network.py (mkolman)
- PEP8 and refactoring for kickstart.py (mkolman)
- PEP8 and refactoring for image.py (mkolman)
- Cosmetic PEP8 and refactoring for flags.py (mkolman)
- PEP8 and refactoring for exception.py (mkolman)
- PEP8 and refactoring for bootloader.py (mkolman)
- PEP8 and refactoring for anaconda_log.py (mkolman)
- Validate dasd and zfcp user input (#1335092) (vponcova)
- network: use introspection data from libnm instead of libnm-glib (lkundrak)
* Mon Jan 16 2017 Martin Kolman <mkolman@redhat.com> - 26.19-1
- Use initialization controller for spoke initialization (mkolman)
- Add module initialization controller (mkolman)
- Fix link to the documentation in the README file (jkonecny)
- There is no thread for dasd formatting in tui. (vponcova)
- Move the (mkolman)
- Fix the status of the StorageSpoke for dasd formatting (#1274596) (vponcova)
* Mon Jan 09 2017 Martin Kolman <mkolman@redhat.com> - 26.18-1
- Always refresh the size of swap before autopartitioning. (vponcova)
- Run the space check only if the spokes are complete (#1403505) (vponcova)
- Ignore result directory with logs from tests (jkonecny)
- Disable pylint no-member error for re.MULTILINE (jkonecny)
- Fix nosetests to use newest python3 (jkonecny)
- Disable the button if iscsi is not available (#1401263) (vponcova)
- Include Python 3.6 sysconfigdata module in initramfs (#1409177) (awilliam)
- Nicer __repr__ for hubs and spokes (mkolman)
- Close the .treeinfo file after the retrieve. (vponcova)
* Wed Jan 04 2017 Martin Kolman <mkolman@redhat.com> - 26.17-1
- Fix a GTK Widget related deprecation warning (mkolman)
- Fix GTK screen/display related deprecation warnings (mkolman)
- Fix GObject and GLib deprecation warnings (mkolman)
- Fix selection of no software environment (#1400045) (vponcova)
- Use signals for Spoke & Hub entry/exit callbacks (mkolman)
- Fix the name of StorageDiscoveryConfig attribute (#1395350) (vponcova)
- Iutil PEP8 & formatting fixes (mkolman)
- Add inst.ksstrict option to show kickstart warnings as errors. (vponcova)
- Use the structured installation task classes (mkolman)
- Improved password quality checking (mkolman)
- Add unit tests for password quality checking (mkolman)
- Use Enum for password status constants (mkolman)
- Use a sane unified password checking policy (mkolman)
- Add install task processing classes and unit tests (mkolman)
- Add a signal/slot implementation (mkolman)
- Set correctly the default partitioning. (vponcova)
* Wed Dec 14 2016 Martin Kolman <mkolman@redhat.com> - 26.16-1
- rpmostreepayload: Rework binds to be recursive (walters)
- Let DNF do its own substitutions (riehecky)
- Bump Blivet version due to systemd-udev dependency (mkolman)
- Don't log "Invalid bridge option" when network has no --bridgeopts.
(rvykydal)
- Fix updating of bridge slave which is bond. (rvykydal)
* Mon Dec 05 2016 Martin Kolman <mkolman@redhat.com> - 26.15-1
- Don't pass storage to firstboot.setup() (mkolman)
- RTD fixes (mkolman)
- Catch ValueError from LVM part in Blivet library (jkonecny)
- Handle unexpected storage exception from blivet (jkonecny)
- Add sudo to test requires (jkonecny)
- network: fix network --noipv4 in %pre (rvykydal)
- fix typo in systemd service keyword (mail)
- Fix pylint issue in ks_version_test (jkonecny)
- Move Anaconda tests to mock (jkonecny)
- Add checks to git-find-branch script (jkonecny)
- Remove intermediate pot files in po-push (mkolman)
- Allow install classes to set alternate states for firstboot/initial-setup
(riehecky)
* Wed Nov 23 2016 Martin Kolman <mkolman@redhat.com> - 26.14-1
- Changed the required version of BlockDev to 2.0. (vponcova)
- Remove auto generated documentation (mkolman)
- Fix generated zanata.xml from https unstable branch (jkonecny)
- Don't crash if the UIC file can't be written (#1375702) (mkolman)
* Wed Nov 23 2016 Martin Kolman <mkolman@redhat.com> - 26.13-1
- Fix calling of can_touch_runtime_system function (jkonecny)
- fix formating a bit (gitDeveloper)
- Fix zanata.xml.in in substitution variables (mkolman)
* Thu Nov 17 2016 Martin Kolman <mkolman@redhat.com> - 26.12-1
- Mock chroot environment is chosed by a git branch (jkonecny)
- Set Zanata branch from git-find-branch script (jkonecny)
- Add git-find-branch script for finding parent branch (jkonecny)
- fix pykickstart docks link (gitDeveloper)
- aarch64 now has kexec-tools (pbrobinson)
- Resolve directory ownership (mkolman)
- Fix user interaction config handling in image & directory install modes
(#1379106) (mkolman)
- tui: Available help system (vponcova)
- network: index team slave connection names starting with 1 (rvykydal)
* Thu Nov 10 2016 Martin Kolman <mkolman@redhat.com> - 26.11-1
- Relax blivet dependency to >= 2.1.6-3 (awilliam)
- Bump required Blivet version (#1378156) (mkolman)
- Fix bad exception handling from blivet in iscsi (#1378156) (jkonecny)
- tui: New class for prompt (vponcova)
- iSCSI: adjust to change in blivet auth info (#1378156) (awilliam)
- Disable false positive pylint error (jkonecny)
- Add some error checking when users don't provide input for DASD devices.
(sbueno+anaconda)
- Add some error checking when users don't provide input for zFCP devices.
(sbueno+anaconda)
- Fix tui timezone region selection by name (vponcova)
* Fri Nov 04 2016 Martin Kolman <mkolman@redhat.com> - 26.10-1
- F26_DisplayMode was added by non-interactive mode (jkonecny)
- Fix pyanaconda tests for display mode (jkonecny)
- Fix parse-dracut to support new kickstart displaymode (jkonecny)
- Add boot option inst.noninteractive to the docs (jkonecny)
- Abort installation when Playload exc rise in a NonInteractive mode (jkonecny)
- Support non interactive mode in standalone spokes (jkonecny)
- Non-interactive mode support for Password and User spokes (jkonecny)
- Raise NonInteractive exception in Hubs event loop (jkonecny)
- Raise exception for noninteractive mode in Hub (jkonecny)
- Add new pykickstart noninteractive mode (jkonecny)
- Disable bad kickstart command on F25 (jkonecny)
- Improve DNF error message to be more understandable (jkonecny)
- tui: Add software group selection (vponcova)
- use blivet iSCSI singleton directly in storage spoke (awilliam)
- Correct deviceLinks to device_links (blivet renamed it) (awilliam)
- Instantiate the zFCP object ourselves now. (#1384532) (sbueno+anaconda)
- Fix the way DASD list is determined. (#1384532) (sbueno+anaconda)
- Add tests for payload location picking (#1328151) (jkonecny)
- Fix picking mountpoint for package download (#1328151) (jkonecny)
- Improve packaging logs without DEBUG logging (jkonecny)
* Tue Oct 25 2016 Martin Kolman <mkolman@redhat.com> - 26.9-1
- Move the collect() function to iutil (mkolman)
- Update messiness level (mkolman)
- PEP8 and general refactoring for the main anaconda.py (mkolman)
- Move kickstart file parsing code to startup_utils (mkolman)
- Don't directly import items from anaconda_log (mkolman)
- Remove old useless code (mkolman)
- Move the rescue ui startup code to the rescue module (mkolman)
- Move set-installation-thod-from-anaconda code to startup_utils (mkolman)
- Move the live startup code to startup_utils (mkolman)
- Move code printing the startup note to startup_utils (mkolman)
- Move the pstore cleanup function to startup_utils (mkolman)
- Move the prompt_for_ssh function to startup_utils (mkolman)
- Move logging setup to startup_utils (mkolman)
- Move the geolocation startup code to a separate function (mkolman)
- Unify addons path variable name (mkolman)
- PEP 8 for startup_utils.py (mkolman)
- PEP 8 for display.py (mkolman)
- Move VNC startup checking to a separate function (mkolman)
- Move imports to the top of the file in display.py (mkolman)
- Refactor display mode handling (mkolman)
- Move display setup & startup tasks out of anaconda.py (mkolman)
- Remove main and extra Zanata pot files on master (jkonecny)
- Remove main and extra pot files before zanata push (jkonecny)
- Don't send intermediate pot files to zanata (gh#791) (awilliam)
- Improve message to be clearer in rescue.py (jkonecny)
- Add option to show password in password field (vponcova)
- Generate a list of DASDs in GUI storage spoke. (#1378338) (sbueno+anaconda)
- Echoing 4de0ec44bdf0f68545bb55bb5fea00464b65fcab May as well include the SL
file (riehecky)
- Fixup class name for CentOS install class (riehecky)
- Fix a typo in SAM file header (mkolman)
- Skip live image on usb when checking storage for mounted partitions
(#1369786) (rvykydal)
* Mon Oct 03 2016 Martin Kolman <mkolman@redhat.com> - 26.8-1
- Fix network spoke being incorrectly marked as mandatory (#1374864) (mkolman)
* Fri Sep 30 2016 Samantha N. Bueno <sbueno+anaconda@redhat.com> - 26.7-1
- Increse python3-blivet version to 1:2.1.5 (jkonecny)
- Fix dnf.repo.Repo now requires dnf.conf.Conf (jkonecny)
- Provides compatibility with DNF-2.0 (jmracek)
* Tue Sep 27 2016 Martin Kolman <mkolman@redhat.com> - 26.6-1
- Don't deactivate all storage in anaconda-cleanup. (#1225184) (dlehman)
- Stop setting ANACONDA udev environment variable. (#1225184) (dlehman)
* Tue Sep 27 2016 Martin Kolman <mkolman@redhat.com> - 26.5-1
- Improved driver disk copying (#1269915) (mkolman)
- Fix screenshot taking logic (#1327456) (mkolman)
- Change blank lines to pep8 for Dracut DUD test (jkonecny)
- Tweak lambda use in Dracut test (jkonecny)
- Add Dracut test for reloading mod dependencies (jkonecny)
* Wed Sep 21 2016 Martin Kolman <mkolman@redhat.com> - 26.4-1
- Fix NTP server list fetching when running in IS (#1374810) (mkolman)
- rpmostreepayload: Clean up use of sysroot files a bit (walters)
- rpmostreepayload: Fix remote handling to use correct sysroot (walters)
* Mon Sep 19 2016 Martin Kolman <mkolman@redhat.com> - 26.3-1
- network: set onboot correctly for vlan on bond device in ks (#1234849)
(rvykydal)
- network: don't show ibft configured devices in UI (#1309661) (rvykydal)
- iscsi: don't generate kickstart iscsi commands for offload devices (#1252879)
(rvykydal)
- iscsi: allow installing bootloader on offload iscsi disks (qla4xxx)
(#1325134) (rvykydal)
- network: adapt to changed NM ibft plugin enablement configuration (#1371188)
(rvykydal)
- network: don't activate bond/team devices regardless of --activate (#1358795)
(rvykydal)
- Fix traceback when payload have None as url (#1371494) (jkonecny)
- Add new Dracut test and fix another ones (#1101653) (jkonecny)
- Fix bug when we add set to list (#1101653) (jkonecny)
- Add new helper script files to build system (#1101653) (jkonecny)
- Document new helper scripts to the DriverDisk README (#1101653) (jkonecny)
- Fix driver unload is disabling network settings (#1101653) (jkonecny)
- dud: fix multiple inst.dd=http:// instances stalling in dracut (#1268792)
(rvykydal)
- network: fix ksdata generating for for non-active virtual devices (#1321288)
(rvykydal)
- network: update kickstart data also with bond bridge slaves (#1321288)
(rvykydal)
- network: add support for bridge bond slaves (#1321288) (rvykydal)
- screen_access: Ensure we write config to real sysroot (walters)
- Add release commit support to makebumpver (mkolman)
- Makefile improvents for separate release commits & tarball creation
(mkolman)
- network: add support for --no-activate kickstart opton (#1277975) (rvykydal)
- fixup! Add base.close() after base.do_transaction (RhBug:1313240) (jmracek)
- Add base.close() after base.do_transaction (RhBug:1313240) (jmracek)
* Tue Sep 06 2016 Martin Kolman <mkolman@redhat.com> - 26.2-1
- Add git merging examples to the contribution guidelines (mkolman)
- network: don't stumble upon new Device.Statistics NM dbus iface (#1370099)
(rvykydal)
- Current Anaconda is not compatible with DNF 2.0.0 (jkonecny)
- Filter out all merge commits from the changelog (mkolman)
- Make it possible to override Zanata branch name (mkolman)
- Switch to argparse & autodetect name, version and bug email address (mkolman)
- Fix multi-inheritance (phil)
- Fix replacement of deprecated DNF method (jkonecny)
- Replace deprecated method of DNF (jmracek)
- Static checker recommended improvements (mkolman)
- Fix replacement of deprecated DNF method (jkonecny)
- Replace deprecated method of DNF (jmracek)
* Mon Aug 29 2016 Samantha N. Bueno <sbueno+anaconda@redhat.com> - 26.1-1
- Fix a pylint no-member warning (mkolman)
- Translate press-c-to-continue correctly in TUI (#1364539) (mkolman)
- Fix bootDrive driveorder fallback (#1355795) (jkonecny)
- Fix bootloader when re-using existing /boot part (#1355795) (jkonecny)
- Add support for device specification variants (#1200833) (mkolman)
- Revert "Update zanata.xml for f25-devel branch." (sbueno+anaconda)
- Update zanata.xml for f25-devel branch. (sbueno+anaconda)
- Add option to override efi_dir (phil)
- efiboot: stderr= is not an option to efibootmgr (phil)
- Fix EFI grub1 case (phil)
- Make Fedora module not so grabby (phil)
- Add centos module to pyanaconda (phil)
- network: don't require gateway for static ipv4 config in TUI (#1365532)
(rvykydal)
- Improve connection network change detection (jkonecny)
- Revert "Revalidate source only if nm-con-ed change settings (#1270354)"
(jkonecny)
- Fix anaconda-pre.service wasn't properly installed (#1255659) (jkonecny)
- Rename function for better consistency (#1259284) (rvykydal)
- Update error message for consistency (#1259284) (rvykydal)
- Add more specific username check messages also to gui (#1360334) (rvykydal)
- fix style guide test false positive on username variable (#1350375)
(rvykydal)
- tui: use functions instead of fake REs for checking values (#1350375)
(rvykydal)
- tui: get proper index of entry we are handling in input (#1331054) (rvykydal)
- tui: fix user name validity checking (#1350375) (rvykydal)
- More descriptive message on invalid username (kvalek)
- Fix another pep8 name issue (jkonecny)
- iscsi: fix getting iscsi target iface of bound target (#1359739) (rvykydal)
- Fix needsNetwork testing only additional repositories (#1358788) (jkonecny)
- Fix restart payload only when repo needs network (#1358788) (jkonecny)
- Cleanup remaining runlevel references (mkolman)
- Clarify a nosave related log message (mkolman)
- Use Screen Access Manager (mkolman)
- Add screen entry/exit callbacks (mkolman)
- Add screen access manager (mkolman)
- A simple formatting fix (mkolman)
- Fix another blivet-2.0 pep8 error (jkonecny)
- Quickfix of failing test (japokorn)
- Some docstring refactoring & typo fixes for the TUI base classes (mkolman)
- Add a file about contributing. (sbueno+anaconda)
- Store logs before anaconda starts (#1255659) (japokorn)
- DD can now replace existing drivers (#1101653) (japokorn)
- Use the F25 timezone kickstart command version (mkolman)
- Use sshd-keygen.target instead of hardcoded sshd-keygen script (jjelen)
- Make it possible to disable sshd service from running. (#1262707)
(sbueno+anaconda)
- Change bootloader boot drive fallback (jkonecny)
- Fix of Python3x uncompatible commands (japokorn)
- Add NTP server configuration to the TUI (#1269399) (mkolman)
- Move the NTP server checking constants to constants.py (mkolman)
- Use a constant for the NTP check thread name prefix (mkolman)
- Fix another victim of the python 2->3 conversion. (#1354020) (dshea)
- Attempt to unload modules updated by a driver disk (dshea)
- Fix the processing of device nodes as driver disks (dshea)
* Fri Jul 08 2016 Brian C. Lane <bcl@redhat.com> - 25.20-1
- Allow kickstart users to ignore the free space error (dshea)
- Stop kickstart when space check fails (bcl)
- Service anaconda-nm-config is missing type oneshot (jkonecny)
- Fix dhcpclass to work both via kickstart and the boot cmdline. (clumens)
- network: handle also ifcfg files of not activated virtual devices (#1313173)
(rvykydal)
- network: check onboot value in ksdata, not NM connections (#1313173)
(rvykydal)
- network: do not activate device on kickstart --onboot="yes" (#1341636)
(rvykydal)
* Fri Jun 24 2016 Brian C. Lane <bcl@redhat.com> - 25.19-1
- hostname: don't set installer env hostname to localhost.localdomain
(#1290858) (rvykydal)
- hostname: add tooltip to Apply button (#1290858) (rvykydal)
- hostname: fix accelerator collision (#1290858) (rvykydal)
- hostname: don't set hostname in initrafms of target system (#1290858)
(rvykydal)
- hostname: set current hostname from target system hostname on demand
(#1290858) (rvykydal)
- hostname: suggest current hostname for storage containers (#1290858)
(rvykydal)
- hostname: don't set target system static hostname to current hostname
(#1290858) (rvykydal)
- network tui: do not activate device when setting its onboot value (#1261864)
(rvykydal)
- network tui: edit persistent configuration, not active connection (#1261864)
(rvykydal)
- network: validate netmask in tui (#1331054) (rvykydal)
- Add wordwrap to text mode and use it by default (#1267881) (rvykydal)
- Fix adding new VG in Custom spoke can't be applied (#1263715) (jkonecny)
- Fix SimpleConfigFile file permissions (#1346364) (bcl)
- Re-configure proxy when updateBaseRepo is called (#1332472) (bcl)
* Fri Jun 17 2016 Brian C. Lane <bcl@redhat.com> - 25.18-1
- Only use <> for markup (#1317297) (bcl)
- Update iscsi dialog for Blivet 2.0 API change (bcl)
- Use the signal handlers to set initial widget sensitivies (dshea)
- Fix bad sensitivity on boxes in source spoke (jkonecny)
- Fix install-buildrequires (bcl)
- Added optional [/prefix] as pattern (kvalek)
- Require network for network-based driver disks (dshea)
- Add missing pkgs to install-buildrequires (#612) (phil)
- Increase the required version of gettext (dshea)
- Fix the name sensitivity in the custom spoke. (dshea)
* Fri Jun 10 2016 Brian C. Lane <bcl@redhat.com> - 25.17-1
- Revert "Temporarily disable translations" (bcl)
- Change where to look for the iscsi object (#1344131) (dshea)
- Fix old blivet identifiers (#1343907) (dshea)
- Fix a covscan warning about fetch-driver-net (#1269915) (bcl)
- Fix crash when NM get_setting* methods return None (#1273497) (jkonecny)
- Overwrite network files when using ks liveimg (#1342639) (bcl)
- Stop using undocumented DNF logging API (bcl)
- Use the LUKS device for encrypted swap on RAID (dshea)
- Keep the subdir in driver disk update paths (dshea)
- Warn about broken keyboard layout switching in VNC (#1274228) (jkonecny)
- Make the anaconda-generator exit early outside of the installation
environment (#1289179) (mkolman)
* Fri Jun 03 2016 Brian C. Lane <bcl@redhat.com> - 25.16-1
- Add a button to refresh the disk list. (dlehman)
- Only try to restart payload in the Anaconda environment (mkolman)
- Make current runtime environment identifiers available via flags (mkolman)
- Display storage errors that cause no disks to be selected (#1340240) (bcl)
- Fix the SourceSwitchHandler pylint errors differently. (clumens)
- Fix pylint errors. (clumens)
- Update the disk summary on Ctrl-A (dshea)
- Revert "Refresh the view of on-disk storage state every 30 seconds."
(dlehman)
- Refresh the view of on-disk storage state every 30 seconds. (dlehman)
- Handle unsupported disklabels. (dlehman)
- Use a blivet method to remove everything from a device. (dlehman)
- Tighten up ResizeDialog._recursive_remove a bit. (dlehman)
- Only look for partitions on partitioned disks. (dlehman)
- NFS DDs installation now works correctly (#1269915) (japokorn)
- Remove unused on_proxy_ok_clicked from Source spoke (jkonecny)
- send all layouts to localed for keymap conversion (#1333998) (awilliam)
- Small cleanup (mkolman)
* Fri May 27 2016 Brian C. Lane <bcl@redhat.com> - 25.15-1
- Resolve shortcut conflict between "Desired Capacity" and "Done" (yaneti)
- network: don't crash on devices with zero MAC address (#1334632) (rvykydal)
- Remove Authors lines from the tops of all files. (clumens)
- Related: rhbz#1298444 (rvykydal)
- New Anaconda documentation - 25.14 (bcl)
- Catch DNF MarkingError during group installation (#1337731) (bcl)
- Fix TUI ErrorDialog processing (#1337427) (bcl)
- Clean up yelp processes (#1282432) (dshea)
* Fri May 20 2016 Brian C. Lane <bcl@redhat.com> - 25.14-1
- Temporarily disable translations (bcl)
- Don't crash when selecting the same hdd ISO again (#1275771) (mkolman)
* Thu May 19 2016 Brian C. Lane <bcl@redhat.com> - 25.13-1
- Fix writeStorageLate for live installations (#1334019) (bcl)
- Remove the locale list from zanata.xml (dshea)
- Ditch autopoint. (dshea)
- Ditch intltool. (dshea)
- Rename fedora-welcome to fedora-welcome.js (dshea)
- Fix UEFI installation after EFIBase refactor (bcl)
- Fix error handling for s390 bootloader errors (sbueno+anaconda)
- Deselect all addons correctly (#1333505) (bcl)
- gui-testing needs isys to be compiled. (clumens)
- Add more to the selinux check in tests/gui/base.py. (clumens)
* Fri May 13 2016 Brian C. Lane <bcl@redhat.com> - 25.12-1
- Add single language mode (#1235726) (mkolman)
- Move default X keyboard setting out of the Welcome spoke (mkolman)
- Rerun writeBootLoader on Live BTRFS installs (bcl)
- Check for mounted partitions as part of sanity_check (#1330820) (bcl)
- Merge pull request #620 from dashea/new-canary (dshea)
- Update the required pykickstart version. (dshea)
- Implement %packages --excludeWeakdeps (#1331100) (james)
- Fix bad addon handling when addon import failed (jkonecny)
- Add retry when downloading .treeinfo (#1292613) (jkonecny)
- Return xprogressive delay back (jkonecny)
- Change where tests on translated strings are run. (dshea)
- Merge the latest from translation-canary (dshea)
- Squashed 'translation-canary/' changes from 5a45c19..3bc2ad6 (dshea)
- Add new Makefile target for gui tests (atodorov)
- Define missing srcdir in run_gui_tests.sh and enable coverage (atodorov)
- Split gui test running out into its own script. (clumens)
- Look higher for the combobox associated with an entry (#1333530) (dshea)
- Use createrepo_c in the ci target. (dshea)
- Compile glib schema overrides with --strict. (dshea)
* Fri May 06 2016 Brian C. Lane <bcl@redhat.com> - 25.11-1
- Don't join two absolute paths (#1249598) (mkolman)
- Don't crash when taking a screenshot on the hub (#1327456) (mkolman)
- Fix pylint errors. (phil)
- Factor out common grub1/grub2 stuff into mixin, and other factoring (phil)
- Add GRUB1 (legacy) support back to Anaconda (phil)
* Fri Apr 29 2016 Brian C. Lane <bcl@redhat.com> - 25.10-1
- Handle unmounting ostree when exiting (bcl)
- ostree: Use bind mounts to setup ostree root (bcl)
- ostree: Skip root= setup when using --dirinstall (bcl)
- disable_service: Specify string format args as logging params. (clumens)
- Ignore failure when disable services that do not exist (phil)
- Get rid of an unused variable in the network spoke. (clumens)
- Revalidate source only if nm-con-ed change settings (#1270354) (jkonecny)
- Merge solutions for test source when network change (#1270354) (jkonecny)
- Changes in network state revalidate sources rhbz#1270354 (riehecky)
* Wed Apr 27 2016 Brian C. Lane <bcl@redhat.com> - 25.9-1
- Use the iutil functions for interacting with systemd services. (dshea)
- Add methods to enable and disable systemd services. (dshea)
- Do not add .service to the end of service names. (dshea)
- Remove detach-client from tmux.conf (dshea)
- Use Blivet 2.0 for set_default_fstype (#607) (sgallagh)
- Remove dnf from the list of required packages. (#605) (dshea)
- Add access to the payload from addons (#1288636) (jkonecny)
- Disable pylint warnings related to the log handler fixer. (dshea)
- Allow the metacity config dir to be overriden. (dshea)
- Do not include /usr/share/anaconda files in the gui package. (dshea)
- Work around logging's crummy lock behavior. (dshea)
- Use rm -r to remove the temporary python site directory. (dshea)
- Remove the subnet label for wired devices. (#1327615) (dshea)
- Fix how unusued network labels are hidden (#1327615) (dshea)
- Remove yum_logger (bcl)
- Remove the lock loglevel (bcl)
- Use a temporary user-site directory for the tests. (dshea)
- Build everything for make ci. (dshea)
- Ignore some E1101 no-member errors when running pylint (bcl)
- Sprinkle the code with pylint no-member disable statements (bcl)
- Catch GLib.GError instead of Exception (bcl)
- Update storage test for Blivet 2.0 API change. (bcl)
- Initialize missing private methods in BasePage class (bcl)
- Update kickstart.py for Blivet 2.0 API change. (bcl)
- Use namedtuple correctly in kexec.py (bcl)
- Add more requires to make password checking still work. (#1327411) (dshea)
- Rename isS390 to match the renames in blivet. (dshea)
- Suppress signal handling when setting zone from location (#1322648) (dshea)
- Refresh metadata when updates checkbox changes (#1211907) (bcl)
* Fri Apr 15 2016 Brian C. Lane <bcl@redhat.com> - 25.8-1
- network: handle null wireless AP SSID object (#1262556) (awilliam)
- Change new_tmpfs to new_tmp_fs. (clumens)
- Add support for kickstart %onerror scripts. (clumens)
- Show network spoke in the TUI reconfig mode (#1302165) (mkolman)
- network: copy static routes configured in installer to system (#1255801)
(rvykydal)
- network: fix vlan over bond in kickstart (#1234849) (rvykydal)
- network: use NAME to find ifcfg on s390 with net.ifnames=0 (#1249750)
(rvykydal)
- Get rid of the reimport of MultipathDevice. (clumens)
- Fix iSCSI kickstart options aren't generated (#1252879) (jkonecny)
- Fix adding offload iSCSI devices (vtrefny)
- Make the list-harddrives script mode robust (mkolman)
* Fri Apr 08 2016 Brian C. Lane <bcl@redhat.com> - 25.7-1
- Blivet API change getDeviceBy* is now get_device_by_* (bcl)
- network: don't set 803-3-ethernet.name setting (#1323589) (rvykydal)
- Log non-critical user/group errors (#1308679) (bcl)
- Fix btrfs metadata raid level kwarg. (dlehman)
- docs: Add release building document (bcl)
- Minor improvements - README and test dependencies (atodorov)
- Add more matches for network connectivity (atodorov)
* Mon Apr 04 2016 Brian C. Lane <bcl@redhat.com> - 25.6-1
- Remove an unused import from anaconda-cleanup. (clumens)
- Don't use booleans in Requires (#1323314) (dshea)
- Set CSS names on all of the anaconda classes. (#1322036) (dshea)
- Don't crash if no groups are specified (#1316816) (dshea)
- Fix only one address is shown in anaconda (#1264400) (jkonecny)
- Fix call to update optical media format. (#1322943) (dlehman)
- Reset invalid disk selection before proceeding. (dlehman)
- Multiple Dogtail tests improvements (atodorov)
- Do not allow liveinst with --image or --dirinstall (#1276349) (dshea)
- New Anaconda documentation - 25.5 (bcl)
* Wed Mar 30 2016 Brian C. Lane <bcl@redhat.com> - 25.5-1
- Don't provide subclasses of the multipath or dmraid commands. (clumens)
- Add support for chunksize raid kickstart parameter. (vtrefny)
- Convert to blivet-2.0 API. (dlehman)
* Thu Mar 24 2016 Brian C. Lane <bcl@redhat.com> - 25.4-1
- Require that the English locale data be available. (#1315494) (dshea)
- Revert "Change the default locale to C.UTF-8 (#1312607)" (#1315494) (dshea)
- Make windows in metacity closable (#1319590) (dshea)
- Fix the use of CSS psuedo-classes in the widgets. (dshea)
- Add reason when logging invalid repository (#1240379) (jkonecny)
* Sat Mar 19 2016 Brian C. Lane <bcl@redhat.com> - 25.3-1
- Apply language attributes to all labels within anaconda. (dshea)
- Add a function to apply a PangoAttrLanguage to a label. (dshea)
- Add functions to watch changes to a container widget. (dshea)
- Switch to the adwaita icon theme. (dshea)
- Fix duplicate network settings in dracut (#1293539) (jkonecny)
- Fix create device with bad name when parsing KS (#1293539) (jkonecny)
- Use a lock for repoStore access (#1315414) (bcl)
- Add missing inst prefix to the nokill option in docs (mkolman)
- Merge pull request #551 from wgwoods/master-multiple-initrd-dd-fix (wwoods)
- fix multiple inst.dd=<path> args (rhbz#1268792) (wwoods)
* Fri Mar 11 2016 Brian C. Lane <bcl@redhat.com> - 25.2-1
- Load the system-wide Xresources (#1241724) (dshea)
- Use an icon that exists in Adwaita for the dasd confirmation (dshea)
- Make it possible to skip saving of kickstarts and logs (#1285519) (mkolman)
- Add a function for empty file creation (#1285519) (mkolman)
- Run actions for argparse arguments (#1285519) (mkolman)
* Wed Mar 09 2016 Brian C. Lane <bcl@redhat.com> - 25.1-1
- don't install kernel-PAE on x86_64 (#1313957) (awilliam)
- except block in py3.5 undefines the variable (bcl)
- Remove some history from the liveinst setup. (dshea)
- Do not run the liveinst setup if not in a live environment. (dshea)
- Set GDK_BACKEND=x11 before running anaconda from liveinst. (dshea)
- Run zz-liveinst as an autostart application (dshea)
- Translate the help button. (dshea)
- Translate the required space labes in resize.py (dshea)
* Fri Mar 04 2016 Brian C. Lane <bcl@redhat.com> - 25.0-1
- Add device id to dasdfmt screen. (#1269174) (sbueno+anaconda)
- Unify displayed columns in custom spoke dialogs. (#1289577) (sbueno+anaconda)
- Show some confirmation to users if adding a DASD was successful. (#1259016)
(sbueno+anaconda)
- Hotfix for missing storage in payload class (#1271657) (jkonecny)
- Check to see if DD repo is already in addOn list (#1268357) (bcl)
- Use the default levelbar offset values. (dshea)
- Do not change the GUI language to a missing locale. (#1312607) (dshea)
- Don't crash when setting an unavailable locale (#1312607) (dshea)
- Change the default locale to C.UTF-8 (#1312607) (dshea)
- Update the libtool version-info. (dshea)
- Use CSS to style the internal widgets. (dshea)
- Move the widgets pixmaps into resources. (dshea)
- Add a resource bundle to libAnacondaWidgets (dshea)
- Rename show_arrow and chosen_changed to show-arrow and chosen-changed (dshea)
- Remove an invalid transfer notation. (dshea)
- Stop using SGML in the docs. (dshea)
- Change the install test URL. (dshea)
- Fix nfs source crash when options change (#1264071) (bcl)
- makebumpver: Add a --dry-run option (bcl)
- NTP should have better behavior (#1309396) (jkonecny)
- Manually set clock shifts on UI idle (#1251044) (rmarshall)
- Don't remove selected shared part when Delete all (#1183880) (jkonecny)
- Don't delete shared/boot parts in deleteAll (#1183880) (jkonecny)
* Fri Feb 19 2016 Brian C. Lane <bcl@redhat.com> - 24.13-1
- tests/gui enhancements (atodorov)
- Fix gui tests for anaconda move to anaconda.py (atodorov)
- Use a different ipmi command to log events. (clumens)
- Clarify that a string in list-screens is actually a regex. (clumens)
- Merge pull request #513 from wgwoods/update-dd-docs (wwoods)
- updated driver updates docs (wwoods)
- Add specification for the user interaction config file (mkolman)
- Update zanata webui URL in translation doc. (dlehman)
- Tweak partition removal in Custom spoke (jkonecny)
- Do not skip evaluation after removing partitions (jkonecny)
- Import iutil earlier so we can use ipmi_report from check_for_ssh. (clumens)
- Make disconnect_client_callbacks more resilient (#1307063). (clumens)
- Move the langpacks install into to a separate function. (dshea)
- Fix _find_by_title method in Accordion (jkonecny)
* Fri Feb 12 2016 Brian C. Lane <bcl@redhat.com> - 24.12-1
- Use host storage for directory or image install dnf download (bcl)
- Log payloadError so we know why installation failed. (bcl)
- Add the addons directory to the rpm. (dshea)
- Use the packaged version of ordered-set (dshea)
- Remove an unused import (dshea)
- Add an uninstall hook for the renamed anaconda (dshea)
- Make langpack work in DNF (#1297823) (jsilhan)
- New Anaconda documentation - 24.11 (bcl)
* Fri Feb 05 2016 Brian C. Lane <bcl@redhat.com> - 24.11-1
- Fix makeupdates for anaconda move to anaconda.py (bcl)
- Rename ./anaconda to ./anaconda.py to work around coverage.py #425 (atodorov)
- Remove special handling for interruptible system calls. (dshea)
- Handle PEP 3101 strings in the gettext context check (dshea)
- Improve RHS summary strings in multiselection (#1265620) (jkonecny)
- Increase GI version required of AnacondaWidgets (jkonecny)
- Increment version of g-introspection for widgets (jkonecny)
- Increment the AnacondaWidgets version (jkonecny)
- Switch to the new Initial Setup unit name (#1299210) (mkolman)
- Uncomment self.check_lang_locale_views in tests/gui/ (atodorov)
- Add dogtail to test requirements (atodorov)
- Add config for easier combining of kickstart and Jenkins coverage data
(atodorov)
- Apply the fallback style to anaconda selectors. (dshea)
- Redo the stylesheet for Gtk 3.19+ (dshea)
- Directly overwrite /usr/share/anaconda/anaconda-gtk.css (dshea)
- Merge pull request #463 from dashea/translation-tests (dshea)
- Display the name of the addon while executing it (bcl)
- Add page selection summary to the right side (#1265620) (jkonecny)
- Ask when removing new items in multiselection (#1265620) (jkonecny)
- Add multiselection with SHIFT key (#1265620) (jkonecny)
- Use show_arrow feature implemented in Selector (#1265620) (jkonecny)
- Add new property to show/hide arrow in Selector (#1265620) (jkonecny)
- Change selection logic when opening Page (#1265620) (jkonecny)
- Add new BasePage class (#1265620) (jkonecny)
- Add signal and methods to MountpointSelector (#1265620) (jkonecny)
- Fix errors with multiselection (#1265620) (jkonecny)
- Accordion class now process events for selectors (#1265620) (jkonecny)
- Change cammel case for accordion.py to new pep8 (jkonecny)
- Move selection logic from custom spoke to accordion (#1265620) (jkonecny)
- Modify ConfirmDeleteDialog now the checkbox is optional (#1265620) (jkonecny)
- Multiselection works in GUI with remove (#1265620) (jkonecny)
- Add multiselection to Accordion with control key (#1265620) (jkonecny)
- Remove bad translations from the source tarball. (dshea)
- Treat warnings from xgettext as errors. (dshea)
- Run translation-canary tests from make check. (dshea)
- Do not run pylint on translation-canary (dshea)
- Squashed 'translation-canary/' content from commit 5a45c19 (dshea)
* Fri Jan 29 2016 Brian C. Lane <bcl@redhat.com> - 24.10-1
- Add a finished method to spokes (#1300499) (bcl)
- Handle DeviceConfiguration with con = None (#1300499) (bcl)
- Log detailed information about installed packages (bcl)
- s/KickstartValueError/KickstartParseError. (clumens)
- Move requiredDeviceSize to the main Payload class (#1297905) (dshea)
* Fri Jan 08 2016 Brian C. Lane <bcl@redhat.com> - 24.9-1
- Handle unexpected DNF exit (bcl)
- Fix bad space needed messages (jkonecny)
- nosetests-3.5 is now the right version. (clumens)
- Ignore a pylint error about how we're using Popen (dshea)
- Mark an unused variable as unused (dshea)
- Ignore type-related errors for types pylint can't figure out (dshea)
- Import errors are just regular errors now (dshea)
- Replace the remaining log.warn calls with log.warning. (dshea)
- Fix an erroneously bare raise statement (dshea)
- Replace the deprecated assertEquals with assertEqual (dshea)
- Don't add a None to the list of things to unmount on ostree installs.
(clumens)
* Wed Dec 02 2015 Brian C. Lane <bcl@redhat.com> - 24.8-1
- Fix pylint problems in the gui testing code. (clumens)
- Merge 9c5e02392d0401a3bd0adecedea03535595773ef into
67b569253c724639c2490f5fab70f7111f699b3f (atodorov)
- Fix the replacement suggestion for "hostname" (dshea)
- Automatically generate sr (dshea)
- Fix PropertyNotFoundError PermHwAddress (#1269298) (jkonecny)
- Make sure python3.5 code can run in early initrd (bcl)
- Replace <list>.delete() with <list>.remove() in user.py (sujithpandel)
- Rename everything that still refers to LiveCD (atodorov)
- Updates to progress and storage tests (atodorov)
- Multiple changes to DogtailTestCase (atodorov)
- Move all Python files into the main gui/ directory (atodorov)
- Simplify tests by removing OutsideMixin and update Creator (atodorov)
- Modify existing tests to match latest anaconda behavior and environment
(atodorov)
- Temporary disable test code which doesn't work (atodorov)
- Make tests/gui/ execute ./anaconda from git (atodorov)
- Add window title (#1280077) (mkolman)
- Replace execReadlines with check_output in parse-kickstart_test.py (bcl)
- Fix a spelling error in the hardware error message (#1284165). (clumens)
* Wed Nov 18 2015 Brian C. Lane <bcl@redhat.com> - 24.7-1
- Collect test-suite.log from all 'make check' invocations. Closes #452
(atodorov)
- Fix parse-kickstart_test.py. (clumens)
- Remove mkdud.py. (clumens)
- Remove the kickstart_tests directory. (clumens)
- Always quote values in ifcfg- files (#1279131) (bcl)
- Include original kickstart in /root/original-ks.cfg (#1227939) (bcl)
- strip spaces from extlinux label and default (#1185624) (bcl)
- Report kernel failures during kickstart tests. (clumens)
- Make sure unicode in kickstart works. (dshea)
- Set the window icon (dshea)
- Only run space check in TUI if spokes are complete. (#1279413)
(sbueno+anaconda)
- Allow a user's primary group to be created in --groups (#1279041) (dshea)
- Remove uses of broad-except. (dshea)
- Add a test for all that container minimization stuff. (clumens)
- Use the partition command in one of the kickstart_tests. (clumens)
- Don't clear the _currentIsoFile if another iso was selected (bcl)
- makeupdates: Include utils/handle-sshpw (bcl)
- Add --sshkey to kickstart sshpw command (#1274104) (bcl)
- Split exception description from exception traceback (jkonecny)
- Show DNF exception instead of silent exit (jkonecny)
- Combine results from all gettext_tests into one log file (atodorov)
- Try to run make ci with real translations. (dshea)
- Untranslate undisplayed TreeView column headers. (dshea)
- Add a test for hidden translatable strings (dshea)
- Add the translated string to markup error messages. (dshea)
- Test glade translations by default (dshea)
- Change the way glade tests are run. (dshea)
- Remove the accelerator test. (dshea)
- Add the test lib directory to $PYTHONPATH in the commit hook (dshea)
- network: create ifcfg files in tui if needed (#1268155) (rvykydal)
- Do not limit ONBOOT default setting to url and nfs installation methods
(#1269264) (rvykydal)
- ibft: fix setting dracut boot args for static ibft nic configuration
(#1267526) (rvykydal)
- network: Don't set --device link default for hostname only network cmd
(#1272274) (rvykydal)
- network: assume --device=link as default also for ks on hd (#1085310)
(rvykydal)
- network: use ibftx interface for iSCSI from iBFT in dracut (#1077291)
(rvykydal)
- network: add s390 options to default ifcfg files (#1074570) (rvykydal)
* Fri Nov 06 2015 Brian C. Lane <bcl@redhat.com> - 24.6-1
- Fix a pylint error in the previous commits. (clumens)
- Honor ANACONDA_WIDGETS_OVERRIDES (atodorov)
- Load anaconda-gtk.css from ANACONDA_DATA if specified (atodorov)
- Use the correct path for ui categories (atodorov)
- Typo fix, it's ANACONDA_WIDGETS_DATA not ANACONDA_WIDGETS_DATADIR (atodorov)
- Allow wired network properties more grid space. (dshea)
- Improve language selection at low resolutions. (dshea)
- Make reclaim work with small screens and big labels (dshea)
- allow repo with only a name if it's a pre-defined one (#1277638) (awilliam)
- Only raise thread exceptions once (#1276579) (bcl)
- Use py3.4 crypt and salt (bcl)
- Be more careful with incomplete device types (#1256582) (dshea)
- Fix an import error in rpmostreepayload.py. (clumens)
- Fix Testing docs inclusion in Sphinx (bcl)
- Ignore interfaces with invalid VLAN IDs. (dshea)
- Cleaner logging of .treeinfo return conditions in dependant function.
(riehecky)
- Update link to upstream kickstart docs (opensource)
- rpmostreepayload: Also unmount internal mounts during shutdown (walters)
- rpmostreepayload: Fix two issues with mounting (walters)
- Add a README for kickstart tests. (clumens)
- Make the documentation match the environment variable. (clumens)
- Check that cache PVs (if any) are in the VG the LV belongs to (#1263258)
(vpodzime)
- Fix the alignment of the "Label" label in custom (dshea)
- Use unsafe caching during kickstart tests. (clumens)
* Wed Oct 28 2015 Brian C. Lane <bcl@redhat.com> - 24.5-1
- Improve install space required estimation (#1224048) (jkonecny)
- Update the on-disk snapshot of storage when adv. disks are added (#1267944)
(vpodzime)
- Check that ipv6 kickstart outputs the right ip= (dshea)
- Change a variable name for pylint. (dshea)
- Do not run time_initialize for image and directory installations (#1274103)
(bcl)
- Remove unused properties (dshea)
- Do not modify the kickstart user data until apply() (dshea)
- Make AdvancedUserDialog.run() more readable (dshea)
- Improve the behavior of the home directory input. (dshea)
- Stop setting inappropriate properties in ksdata. (dshea)
- Update the password strength bar during the password strength check. (dshea)
- Remove unnecessary grab_focus and set_sensitive calls (dshea)
- Use signal handlers in the user spoke more sensibly. (dshea)
- Fix potential issues with the username guesser. (dshea)
- Make kickstart tests growing LVs stricter (vpodzime)
- Point coverage.py to the full path of pyanaconda/ (atodorov)
- Don't set BOOTPROTO= when it isn't set (jbacik)
- Pass strings to blockdev.dasd_format, not a DASDDevice object. (#1273553)
(sbueno+anaconda)
- Revert "Use yum to install the mock buildroot for now." (dshea)
- decode package name for /etc/sysconfig/kernel (RHBZ #1261569) (awilliam)
- Add tests for the more complicated command line options (dshea)
- Store fewer kinds of things in the dirinstall option. (dshea)
- Fix the parsing of selinux=0 (#1258569) (dshea)
- Include a local $ANACONDA_DATADIR in the test environment. (dshea)
- Move the command line arguments to anaconda_argparse. (dshea)
- Don't crash while logging binary output. (dshea)
- Decode program output even if there is no output (#1273145) (dshea)
- Add a test for _run_program with binary output (dshea)
- Test execWithCapture when the command outputs nothing. (dshea)
- Fix a long line in kickstart_tests/functions.sh. (clumens)
- Merge pull request #414 from vpodzime/master-lvm_log (vpodzime)
- Save the lvm.log Blivet may produce (vpodzime)
* Fri Oct 16 2015 Brian C. Lane <bcl@redhat.com> - 24.4-1
- Hide the places sidebar in the ISO chooser widget. (dshea)
- Use GtkResponseType values in the iso chooser dialog (dshea)
- Do not use deprecated getDevicesByInstance method (vtrefny)
- By default, skip those kickstart tests we know to be failing. (clumens)
- Fix pylint unused import (jkonecny)
- network: handle bridge device appearing before its connection (#1265593)
(rvykydal)
- Use $KSTEST_URL in tests that still had dl.fp.o hardcoded. (dshea)
- Support CONNECT in the test proxy server. (dshea)
- Extract the file used by liveimg as a prereq (dshea)
- Convert the proxy script to a prereq. (dshea)
- Add a prereqs function to kickstart tests. (dshea)
- Fix traceback when trying to create list of unformatted DASDs. (#1268764)
(sbueno+anaconda)
- network: handle missing connections of a device configured in GUI better
(rvykydal)
- network: don't set NM_CONTROLLED=no for root on SAN. (rvykydal)
- Add support for other systemd units to kickstart service command (bcl)
- Merge pull request #388 from wgwoods/dd-in-initrd-fix (wwoods)
- Set the password checkbox for empty kickstart passwords. (dshea)
- Do not set the password input text with unencrypted passwords. (dshea)
- Install input checks before modifying the user GUI (#1256065) (dshea)
- Fix a lying error message in style_guide.py (dshea)
- Use "Enter" instead of "Return" for the keyboard key. (dshea)
- New Anaconda documentation - 24.3 (bcl)
- Include missing test files and scripts in Makefile.am/tarball (atodorov)
- dracut: accept inst.dd=[file:]/dd.iso (#1268792) (wwoods)
- Do not override StorageChecker.errors in StorageSpoke (#1252596) (vtrefny)
- Lookup IPv6 address without brackets (#1267872) (bcl)
- Mangle the boot device differently for systemd (#1241704) (dshea)
- Fail the media check if the systemd service failed to start. (dshea)
* Fri Oct 02 2015 Brian C. Lane <bcl@redhat.com> - 24.3-1
- Properly translate c-to-continue on the root selection screen (mkolman)
- Check minimal memory requirements properly (#1267673) (jstodola)
- Allow users to be created with an existing GID. (dshea)
- Add a test for creating a user with an existing GID. (dshea)
- Add tests for gids embmedded in the user groups list. (dshea)
- Allow the kickstart --groups list to specify GIDs. (dshea)
- Add a --groups argument to the user ks test. (dshea)
- Fix the locale pattern packages-instlangs-3 looks for. (dshea)
- Raise an error if osimg cannot be found (#1248673) (bcl)
- Use the bootloader raid levels for bootloader installation (#1266898) (bcl)
- Use otps.display_mode during early startup (#1267140) (mkolman)
- Mount stage2 cdrom after running driver-updates (#1266478) (bcl)
- Get rid of an unused import in the user spoke. (clumens)
- Log crashes from the signal handler. (dshea)
- Save a core file when anaconda crashes. (dshea)
- Keep environment selection when reentering the software spoke (#1261393)
(mkolman)
- Only show the user spoke if no users are specified in kickstart (#1253672)
(mkolman)
- Fix 'cat: /tmp/dd_disk: No such file or directory' (#1251394) (jkonecny)
- Do not display curl 404 errors that can be safely ignored (vtrefny)
- Catch blkid failure in driver-updates (#1262963) (bcl)
- Add kickstart tests for %packages --instLangs (dshea)
- Do not display markup in showDetailedError. (dshea)
- Skip OEMDRV if interactive DD is requested (#1254270) (bcl)
- Drivers are simply under /run/install/DD-x/ (#1254270) (bcl)
- Fix branding when iso is downloaded from nfs or hd (#1252756) (jkonecny)
- Use yum to install the mock buildroot for now. (dshea)
- Rename the gettext tests (dshea)
- Bring back the KSTEST_HTTP_ADDON_REPO substitution in nfs-repo-and-addon.sh
(clumens)
- Run substitution checks on the right kickstart file. (clumens)
- Tell gettext that anaconda is not a GNU package. (dshea)
- Ignore environment modification warnings in docs/conf.py (dshea)
- Check for unsubstituted strings before running a test. (dshea)
- Autopart use 90% of disk capacity for required space compare (#1224048)
(jkonecny)
- Fix include packages install size when downloading on root (#1224048)
(jkonecny)
- Enable and improve the check for swap LV size in LVM cache kickstart tests
(vpodzime)
- make-sphinx-docs: Add modules needed to document tests (bcl)
- Add test documentation (atodorov)
- Fix how the reqpart test checks for /boot, again. (clumens)
- Add a way to get default settings when running the kickstart_tests. (clumens)
- Change how we ignore non-tests in kickstart_tests. (clumens)
- Various fixes to substitution strings in kickstart_tests. (clumens)
- Move kickstart_test .ks files to .ks.in. (clumens)
* Fri Sep 11 2015 Brian C. Lane <bcl@redhat.com> - 24.2-1
- Handle driver rpms retrieved via network (#1257916) (bcl)
- Fix the types passed to chown_dir_tree (#1260318) (dshea)
- Add a test for home directory reuse (dshea)
- Use MDRaidArrayDevice.members instead of .devices (dshea)
- Make sure anaconda reads in ks file from OEMDRV device. (#1057271)
(sbueno+anaconda)
- Try to deal with expected errors from devicetree.populate (#1257648)
(vpodzime)
- Revert "Temporarily disable generating a coverage report." (clumens)
- Fix a DBus InvalidProperty handling (jkonecny)
- Fix another bash syntax problem in kickstart-genrules.sh (#1057271)
(sbueno+anaconda)
- Add a test for the rootpw kickstart command (dshea)
- Add tests for setRootPassword (dshea)
- Add a /boot partition to the reqpart test. (clumens)
- Fix up a statement that's not assigned to anything. (clumens)
- Temporarily disable generating a coverage report. (clumens)
- Don't try to concatenate a list with a string (#1252444) (mkolman)
- Activate coverage for tests executed with sudo (atodorov)
- set sysroot correctly when setting root password (#1260875) (awilliam)
- Add a test for kickstarts that %include a URL (dshea)
- Add missing python dependencies for requests. (#1259506) (dshea)
- Serve the http addon repos from the test tmpdir (dshea)
- Make make-addon-pkgs easier to use from within a test (dshea)
- Add a simple http server for use in kickstart tests. (dshea)
- Add a script to print an IP address for the host. (dshea)
- Add a cleanup hook that can be defined by kickstart tests (dshea)
- Move kickstart test support files into a separate directory. (dshea)
- Fix a python3 related error in the pre-commit hook (dshea)
- network: gui spoke TODO cleanup (rvykydal)
- libnm in spoke: add missing connection for eth device with Configure
(rvykydal)
- libnm in spoke: allow adding missing connection for eth device externally
(rvykydal)
- libnm in spoke: wait for valid state of added device before adding to list
(rvykydal)
- libnm in spoke: use libmn objects instead of names an uuids (device on/off)
(rvykydal)
- libnm in spoke: to check if device is activated just use its object
(rvykydal)
- libnm in spoke: use connnection objects instead of uuids (edit connection)
(rvykydal)
- libnm in spoke: refresh early when device is added (rvykydal)
- libnm in spoke: use connection object instead of uuid (DeviceConfiguration)
(rvykydal)
- libnm in spoke: share nm client in standalone and normal spoke (rvykydal)
- libnm in spoke: add enterprise wpa connection using libnm client (rvykydal)
- libnm in spoke: use AccessPoint object in place of ssid bytearray (rvykydal)
- libnm in spoke: delete connection using libnm client (rvykydal)
- libnm in spoke: replace python-dbus workaround calls for ap security flags
(rvykydal)
- libnm in spoke: call get_data() on ap.get_ssid() result to get ssid bytes
(rvykydal)
- libnm in spoke: showing ip configuration of a device (rvykydal)
- libnm in spoke: NMClient -> NM.Client (rvykydal)
- libnm in spoke: gi.NetworkManager -> gi.NM (rvykydal)
- libnm in spoke: Revert "Fix crash when new device appear in Welcome screen
(#1245960)" (rvykydal)
- libnm in spoke: Revert "Fix crash when connections are changing (#1245960)"
(rvykydal)
- Add an ignoredisk --drives= test. (clumens)
- Add a test for the reqpart command. (clumens)
- Grab anaconda.coverage on tests that reimplement validate(). (clumens)
- Install driver-updates (dshea)
- Fix a typo in service enablement in kickstart.py. (clumens)
- Get rid of the extraneous cats and greps in user.ks. (clumens)
- Add sshkey testing to the user kickstart_test. (clumens)
- Add a kickstart test in Arabic. (clumens)
- Verify Initial Setup services are present before turning them ON/OFF
(#1252444) (mkolman)
- Don't crash if the Japanese PC-98 keyboard is selected (#1190589) (mkolman)
- Report on all local files and exclude what we don't need instead of
explicitly including paths we may not be aware of. (atodorov)
- Change "failed to download" messages from critical to warning. (clumens)
- getcode -> status_code in a live payload error message. (clumens)
- Fix a bash error in kickstart-genrules.sh (#1057271) (sbueno+anaconda)
- specify if=virtio,cache=none for VM drives (atodorov)
- update the test b/c latest anaconda doesn't allow weak passwords (atodorov)
- Specify format=raw to avoid warning from qemu (atodorov)
- update for Python3 nose (atodorov)
- Add a services.sh file to match the existing services.ks. (clumens)
- Add types to all existing kickstart tests. (clumens)
- Add the ability to mark kickstart tests with a type. (clumens)
- Run nm-connection-editor with the --keep-above flag (#1231856) (mkolman)
* Mon Aug 31 2015 Brian C. Lane <bcl@redhat.com> - 24.1-1
- Add a test for the user and group creation functions. (dshea)
- Get rid of libuser. (#1255066) (dshea)
- s/$releasever/rawhide/ (clumens)
- LVM on RAID kickstart test (vpodzime)
- unbuffered read in python3 only works for binary (bcl)
- don't crash if no environment set in interactive (#1257036) (awilliam)
- network: compare with ssid bytes, not str (rvykydal)
- Add dependencies for running the tests/gui tests (atodorov)
- Fix first run environment setup in software spoke (#1257036) (jkonecny)
- Stop pretending liveinst+rescue is supported (#1256061). (clumens)
- Defer to Fedora distro-wide settings for password strength (#1250746) (dshea)
- New Anaconda documentation - 24.0 (bcl)
- Do a better job reporting failures from kickstart_tests. (clumens)
- Preserve coverage results from running the kickstart_tests. (clumens)
* Mon Aug 24 2015 Brian C. Lane <bcl@redhat.com> - 24.0-1
- Remove from the docs repo=hd installation with installable tree (jkonecny)
- Fix a race between a window continuing and the next starting (#1004477)
(dshea)
- Start hubs with the buttons insensitive. (dshea)
- Do not replace the standard streams if not necessary. (dshea)
- Fix inst.repo=hd: is not working (#1252902) (jkonecny)
- Kickstart: Added SELinux test. (kvalek)
- Kickstart tests related to SELinux. (kvalek)
- Package install and debug message logging. (kvalek)
- Don't crash if incorrect environment is set in kickstart (#1234890) (mkolman)
- Fix I/O issues when anaconda is started without a locale. (dshea)
- Move locale environment logic into localization.py (dshea)
- network: fix configuring team in kickstart pre (#1254929) (rvykydal)
- Merge pull request #311 from atodorov/add_local_coverage (clumens)
- Merge pull request #308 from atodorov/rawhide_missing_deps (clumens)
- Enable test coverage in CI (atodorov)
- Fix the single-spoke TUI message for Python 3. (dshea)
- Merge pull request #291 from atodorov/update_coverage_switch (clumens)
- Add missing requirements (atodorov)
- Add basic kickstart tests for LVM Thin Provisioning (vpodzime)
- Use the default mirrorlist instead of fixed repo URL in kickstart tests
(vpodzime)
- Destroy the keyboard layout dialog when finished (#1254150) (dshea)
- Do not encode the geoloc timezone to bytes (#1240812) (dshea)
- use inst.debug as alternative option to start coverage (atodorov)
* Mon Aug 17 2015 Brian C. Lane <bcl@redhat.com> - 23.20-1
- Skip source url checks when network is off (#1251130) (bcl)
- Don't set net.device to link if there is no ksdevice (#1085310) (bcl)
- Reading carrier while link is down raises IOError (#1085310) (bcl)
- Don't write nfs repos to the target system (#1246212) (bcl)
- Make sure username entered in TUI if create a user chosen. (#1249660)
(sbueno+anaconda)
- Write the empty dnf langpacks.conf to the right directory (#1253469) (dshea)
- Add pyanaconda test for network.check_ip_address (jkonecny)
- Replace IPy package by ipaddress (jkonecny)
- Correctly check return code when running rpm from makeupdates (mkolman)
- Fix crash when new device appear in Welcome screen (#1245960) (jkonecny)
- Fix crash when connections are changing (#1245960) (jkonecny)
- Make LVM cache kickstart tests more robust (vpodzime)
- product.img buildstamp should override distribution buildstamp (#1240238)
(bcl)
- On incomplete ks, don't automatically proceed with install. (#1034282)
(sbueno+anaconda)
- Update the translation doc with zanata branching incantations.
(sbueno+anaconda)
- Merge pull request #287 from kparal/patch-1 (clumens)
- boot-options.rst: add a note about nfsiso (kamil.paral)
- Few fixes and amendments for the boot_options.rst file (vpodzime)
- Prevent issues with encrypted LVs on renamed VGs (#1224045) (vpodzime)
- Create and use snapshot of on-disk storage with no modifications (#1166598)
(vpodzime)
- Implement the class for storage snapshots (vpodzime)
- Prevent any changes in the StorageSpoke if just going back (vpodzime)
- Make StorageSpoke's on_back_clicked less complicated (vpodzime)
- Add kickstart tests for the LVM cache kickstart support (vpodzime)
- Disable packages-multilib, for now. (clumens)
- Make sure the liveimg test shuts down when it finishes. (clumens)
- Change how success is checked for the basic-ostree test. (clumens)
* Fri Aug 07 2015 Brian C. Lane <bcl@redhat.com> - 23.19-1
- Add basic support for LVM cache creation in kickstart (vpodzime)
- Use labels for the rest of the non-autopart test results. (dshea)
- Use a disk label to find the filesystem for escrow results (dshea)
- Use someone else's code for PID file management. (dshea)
- Prevent incomplete translations from making the TUI unusable (#1235617)
(mkolman)
- Apply the environment substitutions more liberally in nfs-repo-and-addon
(dshea)
- Use stage2=hd: instead of stage2=live: (dshea)
- Add test for liveimg kickstart command (bcl)
- Fix pre-install script execution (bcl)
- test pre-install kickstart section (bcl)
- Use sys.exit() instead of the exit() created by site.py. (dshea)
- Call ipmi_report before sys.exit (dshea)
- Add a test for proxy authentication (dshea)
- Add optional authentication to the proxy server (dshea)
- Add more tests to proxy-kickstart (dshea)
- Show an alternative prompt if a hub contains only a single spoke (#1199234)
(mkolman)
- Add few docs and improvement in check_ip_address (jkonecny)
- Check whether files actually contain translatable strings. (dshea)
- Add specific error string to TUI user dialog (#1248421) (bcl)
- Make EditTUIDialog error generic (#1248421) (bcl)
- Fix and expand nfs-repo-and-addon.ks (dshea)
- Added a script to make the packages used by nfs-repo-and-addon (dshea)
- Implement the rest of the repo options in dnfpayload. (dshea)
- Fix kickstart test for bond interface creation (jkonecny)
* Fri Jul 31 2015 Brian C. Lane <bcl@redhat.com> - 23.18-1
- Move the proxy server script into a common file. (dshea)
- Use python3 for the proxy server and remove python2 compatibility (dshea)
- makePickle now needs to return bytes (bcl)
- gi.require_version raises ValueError (bcl)
- Remove duplicate signal setup block (bcl)
- Fix three bugs discovered by driverdisk-disk.ks (clumens)
- Fix error with OEMDRV ks auto-load check. (#1057271) (sbueno+anaconda)
- Make sure TUI is readable for non-latin languages (#1182562) (mkolman)
- Equalize capacity & mount point entries (#1212615) (dshea)
- Disable GRUB os_prober on POWER (#1193281) (rmarshall)
- Cancel Container Edit Sensitizes Update (#1168656) (rmarshall)
- Fix SoftwareSpoke._kickstarted. (dshea)
- Disable a Pylint false-positive (#1234896) (mkolman)
- Add support for autostep and --autoscreenshot (#1234896) (mkolman)
- Escape \'s in doc strings (dshea)
- Ellipsize the file system type combo box (#1212615) (dshea)
- Add graphviz to make-sphinx-doc script (jkonecny)
- Remove many of a documentation compilation errors (jkonecny)
- Add class diagrams to existing spokes and hubs (jkonecny)
- Add class diagram settings to documentation (jkonecny)
- Fix the UnusuableConfigurationError dialog (#1246915) (dshea)
- Chase pygobject's stupid moving target (dshea)
- Add missing translation contexts (dshea)
- Actually translate the container type labels (dshea)
- Check whether a translated string requires a context or comment. (dshea)
- Clean up the temporary pools virt-install makes. (clumens)
- Return the same object for repeated calls to __get__ (#1245423) (dshea)
- Use sys.exit instead of os._exit. (clumens)
- Add parentheses around the IPV6 regex fragment. (dshea)
- Add tests for IPv6 literals in URLs (dshea)
- Modify Installation Source Proxy Label (#11688554) (rmarshall)
* Fri Jul 24 2015 Brian C. Lane <bcl@redhat.com> - 23.17-1
- Fix Initial PPC PReP Boot Selector Name (#1172755) (rmarshall)
- Require a newer version of pykickstart (vpodzime)
- Use dictionaries is thread-safe manner. (dshea)
- Merge pull request #234 from wgwoods/master (wwoods)
- Auto-load ks.cfg if OEMDRV volume available. (#1057271) (sbueno+anaconda)
- Check the encrypt checkbox when encrypted specified in KS (vtrefny)
- Do not raise KickstartValueError for missing passphrase (vtrefny)
- Ask for encryption passphrase when not specified in ks (#1213096) (vtrefny)
- dracut: minor cleanup (wwoods)
- dracut: fix missing messages for inst.ks=cdrom (wwoods)
- Wait forever for kickstarts on CDROM (#1168902) (wwoods)
- Use abs_builddir instead of builddir so paths will look more reasonable.
(clumens)
- Add a new makefile target that does everything needed for jenkins. (clumens)
- Merge pull request #228 from AdamWill/logind (dshea)
- Fix crash when mirrorlist checkbox is checked (jkonecny)
- Fix crash when user start typing proxy credentials (jkonecny)
- Check repository URL before leaving Source Spoke (jkonecny)
- Add IDs to identify addon repositories (jkonecny)
- Repositories can be checked without a selection (jkonecny)
- Consolidate the language environment variables. (dshea)
- Change the generated API indices slightly (dshea)
- Ignore "mountpoint" used a format specifier (dshea)
- filesystems -> file systems, per the style guide (dshea)
- Properly parameterize a translated string (dshea)
- Fix pylint errors in rescue.py. (dshea)
- Remove unused imports (dshea)
- Remove text.py from spec file (#965985) (sbueno+anaconda)
- Merge pull request #220 from AdamWill/1243962 (dshea)
- Fix adding 'boot=' option in FIPS mode (vtrefny)
- anaconda.target: Wants systemd-logind.service (#1222413) (awilliam)
- Remove the last usage of newt and get rid of it as a dependency (#965985)
(sbueno+anaconda)
- Enable anaconda to use the new rescue mode. (#965985) (sbueno+anaconda)
- Get rid of unnecessary constants in constants_text. (#965985)
(sbueno+anaconda)
- Get rid of some unnecessary files. (#965985) (sbueno+anaconda)
- Display verbose packaging errors to the user (bcl)
- Show source errors from refresh method (bcl)
- Fix the validate functions in the btrfs kickstart_tests. (clumens)
- Connect kickstart lang data to dnf-langpacks (#1051816) (dshea)
- Add simple_replace config file function (bcl)
- Remove some vestiges of the old packaging module (dshea)
- Remove window boot block detection functions. (dshea)
- Remove iutil.xprogressive_delay. (dshea)
- Simplify iutil.mkdirChain. (dshea)
- Decode wifi SSIDs into strings. (#1240398) (dshea)
- Actually use the temp directory so test files get cleaned up (dshea)
- Disable the output from rpmbuild (dshea)
- Remove stray references to python2. (dshea)
- Fix possible to start installation without network (#1221109) (jkonecny)
- Fix 'q' (to quit) do not work in TUI hub (jkonecny)
- act on the right objects when stripping URL protocols (#1243962) (awilliam)
- Fix 'App' object has no attribute 'queue' (#1243316) (jkonecny)
* Thu Jul 16 2015 Brian C. Lane <bcl@redhat.com> - 23.16-1
- fix storage writing for live and ostree installs (#1236937) (awilliam)
- Add O_CREAT to the open flags when extracting rpm files. (dshea)
- Move ostree gobject version check next to the import (#1243543) (bcl)
- Remove rpmfluff from the buildrequires. (dshea)
- Only import readline if readline is necessary. (dshea)
- use the right baseurl in run_install_test.sh. (clumens)
- Don't copy the environment when starting metacity. (dshea)
- Fix the use of a temporary file in SimpleConfig.write (dshea)
- Add a test for SimpleConfig.write(use_tmp=True). (dshea)
- Remove an unnecessary chmod when creating chrony.conf (dshea)
- Fix some bad uses of chmod. (dshea)
- Add a function to open a file with specific permission bits (dshea)
- Don't ask to start vnc if user specifies text mode. (#1202277)
(sbueno+anaconda)
- New Anaconda documentation - 23.15 (bcl)
- Add a helper for building Sphinx docs using mock. (bcl)
- Update Sphinx configuration for python3 (bcl)
- Running without a GUI can also raise ValueError in errors.py (bcl)
- parse-kickstart_test.py: fix driverdisk_test() (wwoods)
- Fix the spelling of "version" (dshea)
* Mon Jul 13 2015 Brian C. Lane <bcl@redhat.com> - 23.15-1
- Some dracut modules anaconda needs have been split into their own package.
(clumens)
- User operation kickstart tests. (kvalek)
- Kickstart tests for UTC and LOCAL hwclock. (kvalek)
- Kickstart firewall tests. (kvalek)
- Fix Repository New_Repository has no mirror or baseurl (#1215963) (jkonecny)
* Fri Jul 10 2015 Brian C. Lane <bcl@redhat.com> - 23.14-1
- Catch blivet formatDevice ValueError in custom (#1240226) (bcl)
- There's now a python3-rpmfluff, so revert this. (clumens)
- Fix a couple other pylint problems in the driver disk tests. (clumens)
- Merge pull request #194 from wgwoods/master (wwoods)
- dracut: fix boot failure waiting for finished/dd.sh (wwoods)
- Use builddir instead of srcdir to find the dd utils (dshea)
- Fix the dd_test for python3. (dshea)
- Fix %files to deal with compiled python3 modules (dshea)
- Add a bunch of gi.require_version calls (dshea)
- Temporarily disable the error about not importing rpmfluff. (clumens)
- Don't try to iterate over threads directly in wait_all. (clumens)
- Update the btrfs kickstart tests to use functions.sh. (clumens)
- Merge pull request #182 from wgwoods/dd-refactor (wwoods)
- driver_updates: fixes from patch review (wwoods)
- Don't be too picky about what name is --device=link (dshea)
- Ignore stderr output from parse-kickstart. (dshea)
- Add an option to execReadlines to filter out stderr. (dshea)
- Ignore interruptible system calls in the dd test (dshea)
- Fix an undefined variable in writeStorageLate (dshea)
- Connect zfcp entries to the discovery buttons (dshea)
- Connect iscsi activations to buttons (dshea)
- Connect the dasd number entry to the discovery buttons. (dshea)
- Add keyboard layouts on the row-activated signal. (dshea)
- Connect dialog inputs to default actions. (dshea)
- Remove unnecessary GtkNotebooks. (dshea)
- Re-save some dialog glade files. (dshea)
- Merge pull request #181 from wgwoods/master (wwoods)
- dd-refactor: dracut + build bits (wwoods)
- Add kickstart test for RAID1 (bcl)
- pass PYTHONPATH to the kickstart test framework (bcl)
- Write servers to chronyd.conf even if it's off (#1197575) (wwoods)
- Refresh advanced disks after disk summary dialog (#1226354) (bcl)
- parse-kickstart: just emit 'inst.dd=XXX' for driverdisk (wwoods)
- parse-kickstart: pylint fixes (wwoods)
- dd-refactor: new driver_updates.py + tests (wwoods)
- payload: fix driverdisk repos (wwoods)
- dracut: fix boot with inst.ks and no inst.{repo,stage2} (#1238987) (wwoods)
- Use the most recent versions of the btrfs, logvol, part, and raid commands.
(clumens)
- Allow /boot partition on iscsi with ibft (#1164195) (jkonecny)
- Add kickstart tests to test btrfs installation (vtrefny)
- Fix broken test by infiniband patch (#1177032) (jkonecny)
* Thu Jul 02 2015 Brian C. Lane <bcl@redhat.com> - 23.13-1
- Add a switch for the Airplane Mode label (dshea)
- Connect labels with keyboard accelerators to a widget (dshea)
- Add a test for dangling keyboard accelerators. (dshea)
- Use pocketlint for translation and markup checking (dshea)
- Flatten the glade test directory. (dshea)
- Add support for specifying arbitrary mkfs options. (clumens)
- Fix kickstart install with infiniband (#1177032) (jkonecny)
- anaconda-dracut: Fix sysroot mount for netroot (#1232411) (bcl)
- Add RAID swaps to /etc/fstab (#1234469) (bcl)
- network: catch another race when calling dbus methods on invalid devices
(rvykydal)
- network: GUI, add connection even when virtual device activation failed
(#1179276) (rvykydal)
- Fix IP / hostname mismatches when showing VNC server address (#1186726)
(rvykydal)
- Check also ipv6 default routes when looking for onboot=yes device (#1185280)
(rvykydal)
- Merge pull request #157 from wgwoods/master_dd_fixes (wwoods)
- Do not check dependencies on invalid payloads (dshea)
- network: don't set onboot=False for default autoconnections (#1212009)
(rvykydal)
- Fix the types used to write anaconda-tb-all.log (dshea)
- dd: drop unnecessary archive_read_data_skip (wwoods)
- dd_extract: -l should not extract modules+firmware (wwoods)
- dd: fix permissions on extracted files (#1222056) (wwoods)
- tests: add dd_tests (wwoods)
* Fri Jun 26 2015 Brian C. Lane <bcl@redhat.com> - 23.12-1
- Revert "Add an optional conditional to progress_report." (bcl)
- Fix inconsistencies in the payload messages. (dshea)
- Fix install-requires and install-buildrequires (dshea)
- anaconda-dracut: Mount /dev/mapper/live-rw (#1232411) (bcl)
- Eliminate some false test results when running glade tests. (atodorov)
- Move the knowledge about network packages into ksdata.network. (clumens)
- Add an optional conditional to progress_report. (clumens)
- Move the big block of late storage writing out of install.py. (clumens)
- The attribute is named ostreesetup.nogpg. (clumens)
- Use the index in grubenv (#1209678) (bcl)
- Do not raise an exception on EINTR from os.close or os.dup2 (dshea)
- Merge pull request #154 from mulkieran/master-959701 (mulkieran)
- Improve focus behavior in the advanced user dialog (dshea)
- Re-save advanced_user.glade (dshea)
- Depsolve kickstarted packages on the summary hub (#961280) (dshea)
- Add a kickstart test for %packages --ignoremissing (dshea)
- Remove descriptions for RAID levels (#959701) (amulhern)
- No kexec-tools on aarch64 (bcl)
* Fri Jun 19 2015 Brian C. Lane <bcl@redhat.com> - 23.11-1
- Do not import iutil from flags (dshea)
- Ignore EINTR errors in files unlikely to encounter them (dshea)
- Reimplement the open override for the dracut scripts (dshea)
- Wrap the only non-open call found by the new pocketlint checks (dshea)
- Redefine open to retry on EINTR (dshea)
- Remove __future__ imports (dshea)
- Use python 3's OSError subclasses instead of checking errno (dshea)
- Allow kwargs in eintr_retry_call (dshea)
- Remove explicit uses of /dev/null (dshea)
- Do not retry calls to close or dup2 (dshea)
- Remove another function from isys (dshea)
- Make dialogs behave better with timed input validation (dshea)
- Fix the password/confirm checks to work with delayed validation (dshea)
- Move the URL protocol removal out of the input check (dshea)
- Remove the vestigal capslock label from the password spoke (dshea)
- Re-saved a few glade files (dshea)
- Run set_status unconditionally from update_check_status (dshea)
- Do not run input checks for every keystroke of input (#1206307) (dshea)
- Add a method to execute timed actions early (dshea)
- Use comps.environments instead of comps.environments_iter (#1221736) (dshea)
- Merge pull request #83 from mulkieran/master-requires (mulkieran)
- Only show supported autopart choices in choices combo. (amulhern)
- Strip out device types that blivet is not able to support. (amulhern)
- Update blivet required version. (amulhern)
- Fix nfs4 stage2 and repo handling (#1230329) (bcl)
- Update upd-kernel so that it actually works (#1166535) (bcl)
- Fix passing ,nfsvers=3 to dracut (#1161820) (bcl)
- Require the python3 version of iscsi-initiator-utils (dshea)
- Fix the pylint pre-commit hook for python3 and pocketlint (dshea)
- Fix a type check to work with python 3. (dshea)
- Do not log Xorg output to tty5 (dshea)
* Wed Jun 10 2015 Brian C. Lane <bcl@redhat.com> - 23.10-1
- Deal with encrypted partitions not being readable by virt-cat. (clumens)
- Make use of the restore_signals Popen argument (dshea)
- Don't allow /boot on iSCSI. (#1164195) (sbueno+anaconda)
- Merge pull request #127 from mulkieran/master-kickstart (mulkieran)
- Actually distribute the clickable message test, too (dshea)
- Fix disk argument passing to virt-cat in the ostree test. (clumens)
- Relabel all password and group files in %post (#1228489) (dshea)
- Deal with the order of ifcfg files not being guaranteed. (clumens)
- Add a __init__.py to fix up an error when running iutil_test.py. (clumens)
- Actually run the clickable message test (dshea)
- Add a false positive to pylint checking for S390Error. (clumens)
- Let the excludedocs test pass if there are only directories left. (clumens)
- Allow successful kstest results to provide more details. (clumens)
- The escrow_cert test cannot use autopart. (clumens)
- Don't warn on PyInit__isys being unused. (clumens)
- Test that root LV is encrypted. (amulhern)
- Deal with subprocess returning bytes in tests/lib/filelist.py, too. (clumens)
- Make anaconda+python3+pocketlint work. (clumens)
- Start using our new shared pylint framework in anaconda. (clumens)
- Remove our extra pylint checkers. (clumens)
- Remove a duplicate libselinux-python3 requires. (clumens)
- Run makeupdates with Python 2 for now (mkolman)
- Don't use the _safechars private property (#1014220) (mkolman)
- Make sure directory size is returned as int (#1014220) (mkolman)
- Only warn about missing yum-utils (#1014220) (mkolman)
- Make sure set_system_time() gets an integer (#1014220) (mkolman)
- Make sure the column number in TUI is an integer (#1141242) (mkolman)
- Python 3 compatible sorting fixes (#1014220) (mkolman)
- Make version comparison Python 3 compatible (#1014220) (mkolman)
- Don't apply numeric comparison on None (#1141242) (mkolman)
- Avoid comparing None to an integer (#1141242) (mkolman)
- Handle urllib split (#1014220) (mkolman)
- Don't try to decode strings (#1014220) (mkolman)
- Rename function attributes (#1014220) (mkolman)
- Replace raw_input() with input() (#1014220) (mkolman)
- Make iterators and their usage Python 3 compatible (#1014220) (mkolman)
- Convert Python 2 metaclass magic to Python 3 metaclass magic (#1014220)
(mkolman)
- Make the raise syntax Python 3 compatible (#1014220) (mkolman)
- Python 3 no longer does tuple parameter unpacking (#1014220) (mkolman)
- Make isys Python 3 compatible (#1014220) (mkolman)
- Set a correct mode for the tempfile (#1014220) (mkolman)
- Python 3 temp files no longer reflect external changes (#1014220) (mkolman)
- Make print usage Python 3 compatible (#1014220) (mkolman)
- Rename the warnings spoke to warnings_spoke (#1014220) (mkolman)
- Replace list comprehension with for at class level (mkolman)
- Make gettext usage Python 3 compatible (#1014220) (mkolman)
- Do not open tty5 for writing in the "a" mode (#1014220) (vpodzime)
- Do not use pykickstart's RepoData as a key in a dict (#1014220) (vpodzime)
- Do not run repo attrs' checks if they are not set up yet (#1014220)
(vpodzime)
- Don't depend on side effects of map() (#1141242) (mkolman)
- Don't use exceptions' message attribute (#1014220) (vpodzime)
- Addapt to string type changes (#1014220) (mkolman)
- Handle modules returning bytes in Python 3 (#1014220) (mkolman)
- Add and use function that makes sure we work with strings (#1014220)
(vpodzime)
- Handle modules requiring different string types in Python 3 (#1014220)
(mkolman)
- Remove sitecustomize (#1014220) (mkolman)
- Make ASCII conversions Python compatible (#1014220) (mkolman)
- Remove "is Unicode" tests (#1014220) (mkolman)
- Fix ASCII conversion tests (#1014220) (mkolman)
- Return a string when calling a program (#1014220) (mkolman)
- Handle subprocess returning bytes (#1014220) (mkolman)
- Handle latin-1 strings in locale -a output (#1014220) (mkolman)
- Open the VNC password file for binary writing (#1014220) (mkolman)
- Update parse-kickstart for python3 (#1014220) (bcl)
- Update driver-updates for python3 (#1014220) (bcl)
- Update python-deps for python3 (#1014220) (bcl)
- Add a test for parse-kickstart (#1014220) (bcl)
- Make the import Python 3 compatible (#1014220) (mkolman)
- Change configparser and queue imports (#1014220) (mkolman)
- Remove imports from the __future__ (#1014220) (mkolman)
- Use the imp module directly (#1014220) (mkolman)
- Use Python 3 versions of Python dependencies (#1014220) (mkolman)
- Use /usr/bin/python3 in scripts (#1014220) (mkolman)
- Use Python 3 versions of nose and Pylint (#1014220) (mkolman)
- Build the Anaconda widgets for Python 3 (#1014220) (mkolman)
- Update makebumpver for python3 (#1014220) (bcl)
- Fix Kickstart installation without default gateway errors out (jkonecny)
- Fix results checking in a couple ks tests. (clumens)
* Wed Jun 03 2015 Brian C. Lane <bcl@redhat.com> - 23.9-1
- Fix a usage typo in run_once_ks script. (sbueno+anaconda)
- Add kickstart tests for keyboard settings. (sbueno+anaconda)
- Add a kickstart test for lang settings. (sbueno+anaconda)
- Fix a % call inside _(). (clumens)
- Convert ntp-pools.* to using the new kstest functions and autopart. (clumens)
- Fix up the expected output in parse-kickstart_test.py. (clumens)
- Fix a couple more pylint problems in the s390 code. (clumens)
- Use the adapted Timezone class for kickstart data (vpodzime)
- Add a kickstart test for processing NTP servers/pools configuration
(vpodzime)
- Show error on invalid username attempts in TUI. (#1171778) (sbueno+anaconda)
- Fix dracut reads ksdevice from missing os enviromnent (jkonecny)
- Run kickstart tests through an LMC-like program, not LMC itself. (clumens)
- Move common kickstart_test code out into its own functions.sh file. (clumens)
- Switch to using autopart in the kickstart tests. (clumens)
- Fix a couple pylint errors. (sbueno+anaconda)
- Make anaconda changes necessary for libblockdev s390 plugin.
(sbueno+anaconda)
- Add a kickstart test for lvm with percentage-based sizes. (dlehman)
- Add kickstart test for basic fixed-size lvm layout. (dlehman)
- Add a kickstart test to validate the default fstype. (dlehman)
- Add kickstart test to test bond interface creation (jkonecny)
- Add kickstart test to test vlan creation (jkonecny)
- Fix --device=link and --device not specified (#1085310) (rvykydal)
- Add kickstart test to test hostname (jkonecny)
- Add a /boot to tmpfs-fixed_size.ks. (clumens)
- Fix bad warning message when user set illegal IP (jkonecny)
- Fix bad check of illegal ip address (jkonecny)
- Add a simple tmpfs kickstart test (mkolman)
- Add a kickstart test for escrow packets and backup passphrases (dshea)
- Fix a typo that caused us to discard corrected target sizes. (#1211746)
(dlehman)
- Don't pass anything to ./configure. (dshea)
- Fix a pylint problem in parse-kickstart_test.py. (clumens)
- Fix 0 choice in Language and Storage in TUI mode (jkonecny)
- Update html documentation for new boot-options section (bcl)
- Convert boot-options to ReST and include it in the Sphinx documents. (bcl)
* Fri May 15 2015 Brian C. Lane <bcl@redhat.com> - 23.8-1
- Clean up after processKickstart in parse-kickstart_test.py. (clumens)
- Add support to dnfpayload.py for addon NFS repos. (clumens)
- Fix IndexError: list index out of range (#1219004) (jkonecny)
- Fix a typo in proxy-kickstart.sh that was causing a test time out. (clumens)
- iSCSI Name Validation using regexes (sujith_pandel)
- Add kickstart tests for proxy usage. (dshea)
- In dracut, do not display a warning for network lines with just a hostname.
(clumens)
- Add transport adapters to support ftp and file fetching (dshea)
- Fix for "Kickstart installation fails..." (#1197960) (jkonecny)
- Allow passing kickstart tests to be run on the command line. (clumens)
- Automatically collect environment variables to be passed to ks tests.
(clumens)
- Use isinstance instead of type for doing type checks. (clumens)
- Remove yumpayload.py, its support files, and most references to yum.
(clumens)
- Fix the packages-and-group wildcard exclusion test (dshea)
- Set the GUI-selected environment in the ksdata (#1192100) (dshea)
- Don't crash if the disk model is None (#1215251) (dshea)
- Correct an error message in packages-and-groups-1.ks. (clumens)
- Switch from testing for emacs* to kacst*. (clumens)
- Tests that end in a traceback are failures, not successes. (clumens)
- Don't run run_report.sh from within run_kickstart_tests.sh. (clumens)
- If a kickstart test failed due to a traceback, display that. (clumens)
- Wrap device labels earlier (#1212586) (dshea)
- Remove the angle property from the device label (dshea)
- Get rid of the find button in the filter spoke. (dshea)
- Rearrange filter.glade (dshea)
- Fix errors in the vendor column renderers. (dshea)
- Fix some minor inconsistencies in filter.glade (dshea)
- Fix issues with advanced storage searching. (dshea)
- Remove duplicate entries from search combo boxes (dshea)
- Use named IDs for the filter type combo boxes. (dshea)
- Rearrange filter.glade the way glade wants it now (dshea)
- Add a reporting support script to kickstart tests. (clumens)
- Return a specific error code when a test times out. (clumens)
- Fix indentation in run_one_ks.sh. (clumens)
- Also remove all the fonts in the packages-and-groups-1 test. (clumens)
- Enable the basic-ftp and basic-ftp-yum kickstart tests. (clumens)
- Fix a typo in groups-and-envs-2.ks (clumens)
- Get NTP pools and servers from ksdata for the runtime config (vpodzime)
- Adapt to the new argument list for save_servers_to_config. (clumens)
- Remove the restriction that /boot be below 2TB for grub (#1082331) (dshea)
- Distinguish between NTP pools and servers in GUI (vpodzime)
- Add support for chrony pool directive (mlichvar)
- Add a readme pointing to the documentation (bcl)
- Sphinx docs - use source order (bcl)
- Add html documentation for Anaconda v23.7 (bcl)
- Place html docs under ./docs/html/ (bcl)
- Configure proxy settings for dnf payload (#1211122) (bcl)
- Change online action to change (bcl)
- Check for images/install.img first for netboot (bcl)
- Ignore addon and anaconda sections in handle-sshpw (bcl)
- Ignore %anaconda section in parse-kickstart (bcl)
- Change of label in iscsi storage spoke (jkonecny)
* Wed Apr 22 2015 Brian C. Lane <bcl@redhat.com> - 23.7-1
- Fix doReqPartition import from autopart (bcl)
- Add support for reboot --kexec kickstart command (bcl)
- Add inst.kexec and --kexec support to reboot with kexec (bcl)
- Add setup_kexec method to prepare the system for a reboot with kexec (bcl)
- Add kickstart %pre-install section support (bcl)
- Remove the custom help button from the toolbar (bcl)
- Use multiple streams for zRAM instead of multiple devices (vpodzime)
- iscsi: pass rd.* options of devices to be mouted in dracut (#1192398)
(rvykydal)
- Remove the unused productName import from custom_storage_helpers.py.
(clumens)
- Remove the old custom partitioning help dialog (mkolman)
- Implement the new reqpart command. (clumens)
- Sort disks by name when checking disk selection (vpodzime)
- Set both .format's and .originalFormat's passphrase on unlock (vpodzime)
- Make the Encrypt checkbox insensitive for encrypted non-BTRFS devices
(#1210254) (vpodzime)
- Check for Gtk before importing escape_markup (bcl)
- If the network is disabled, also disable the network part of the source
spoke. (#1192104) (clumens)
- Add handling for unusable storage configurations. (dlehman)
- Allow markup in the label/message of DetailedErrorDialog. (dlehman)
- Allow passing an optional button list to showDetailedError. (dlehman)
- Allow kwargs with gtk_action_wait, gtk_action_nowait decorators. (dlehman)
- Fix makeupdates handling of Release: (bcl)
- Make sure we unmount the path we mounted (bcl)
- Fix up one more back_clicked reference that got missed. (clumens)
- Don't unconditionally set ksdata.lang.seen to True (#1209927) (mkolman)
- Reset the back_clicked flag if we stay on the Storage spoke (#1210003)
(vpodzime)
- Mark the back_clicked attribute of the Storage spoke as private (vpodzime)
- TUI pwpolicy setup was supposed to be in __init__ not refresh (#1208607)
(bcl)
- Preserve the order of boot args added by kickstart. (clumens)
- Revert "allow /boot on btrfs subvol or filesystem" (bcl)
- Connect scroll adjustments in the right class (#1206472) (dshea)
* Thu Apr 02 2015 Brian C. Lane <bcl@redhat.com> - 23.6-1
- Enforce sane disk selections. (dlehman)
- Add a test for parse-kickstart (bcl)
- Add --tmpdir to parse-kickstart for testing (bcl)
- Use the correct format for IPMI messages. (clumens)
- Do not use min_luks_entropy with pre-existing devices (#1206101) (dshea)
- Remove the dnf cache directory when resetting the repo (dshea)
- Do not add separators to the addon list when not needed (dshea)
- Only use the instclass environment if it actually exists. (dshea)
* Fri Mar 27 2015 Brian C. Lane <bcl@redhat.com> - 23.5-1
- Mock external module dependencies for readthedocs (bcl)
- Generate the pyanaconda module documentation (bcl)
- Reformat kickstart.rst using better ReST markup (bcl)
- Add some deprecation-related false positives. (clumens)
- Add Sphinx documentation support (bcl)
- Add documentation on %anaconda kickstart command (bcl)
- Prevent Storage spoke Done button method from multiple launch (jkonecny)
- Prevent spokes from being exited more times. (jkonecny)
- Only depend on pygobject3-base in anaconda-core (#1204469) (mkolman)
- Use proxy when configured for the base repo (#1196953) (sjenning)
- Assume UTC if setting the system time without a timezone (#1200444) (dshea)
- Add boolean as return to ThreadManager.wait (jkonecny)
- Make sure LANG is always set to something (#1201896) (dshea)
- Fix pylint/translation issues from the pwpolicy patches. (clumens)
* Fri Mar 20 2015 Brian C. Lane <bcl@redhat.com> - 23.4-1
- Clean out the mock chroot before attempting to run the rest of the test.
(clumens)
- Implement %anaconda kickstart section for pwpolicy (bcl)
- Add pwpolicy support to TUI interface (bcl)
- Add pwpolicy for the LUKS passphrase dialog. (bcl)
- Add pwpolicy for the user spoke. (bcl)
- Use pwpolicy for the root password spoke. (bcl)
- Add the text for weak passwords to constants (bcl)
- Add tests with an FTP instrepo (dshea)
- Add kickstart tests for an NFS instrepo and addon repos. (dshea)
- Handle /boot on btrfs for live (#1200539) (bcl)
- rpmostreepayload: write storage config after shared var is mounted (#1203234)
(rvykydal)
- Tweak tmux configuration file (jkonecny)
- Remove --device= from the new kickstart tests. (clumens)
- Add more kickstart-based packaging tests. (clumens)
- Fix enlightbox call in ZFCPDialog. (#1151144) (sbueno+anaconda)
- fix crash with bare 'inst.virtiolog' in boot args (wwoods)
- Do not attempt to set None as a warning (dshea)
- fix inst.ks.sendmac for static ip=XXX (#826657) (wwoods)
* Fri Mar 13 2015 Brian C. Lane <bcl@redhat.com> - 23.3-1
- Only insert strings into the environment (#1201411) (dshea)
- Fix the rescue kernel version list in writeBootLoader (#1201429) (dshea)
- Missing local variable check (omerusta)
- Fix the handling of nfs:// URLs. (dshea)
- Add glob support for the -a/--add option in makeupdates (mkolman)
- White Space fixes (omerusta)
- Put all mock results into the top-level source dir. (clumens)
- Merge pull request #31 from dcantrell/master (david.l.cantrell)
- Require newt-python in anaconda-core (dshea)
- Make merge-pr executable (dshea)
- Display an error for exceptions during GUI setup (dshea)
- Remove unused invisible char properties (dshea)
- Add a check for invisible_char validity (dshea)
- Connect viewport adjustments to child focus adjustments (#1192155) (dshea)
- Support '%packages --multilib' in dnfpayload.py (#1192628) (dcantrell)
* Fri Mar 06 2015 Brian C. Lane <bcl@redhat.com> - 23.2-1
- Add rc-release target (bcl)
- Change --skip-tx to --skip-zanata in scratch-bumpver (bcl)
- Add --newrelease to makebumpver (bcl)
- Improve the addon repo name collision code (#1125322) (bcl)
- Fix the import of mountExistingSystem (vpodzime)
- Fix import error in anaconda-cleanup. (sbueno+anaconda)
- Use the new static method to get possible PE sizes (vpodzime)
- Try using the global LUKS passphrase if none is given for LV/part (#1196112)
(vpodzime)
- Fix the help button mnemonic display on spokes (dshea)
- Only set the hub message if the message has changed (dshea)
- Wrap the info bar in a GtkRevealer (dshea)
- Add links to clickable warning and error messages. (dshea)
- Add a test to look for clickable messages that aren't clickable enough.
(dshea)
- Increment the widgets version number (dshea)
- Allow markup and links in the info bar. (dshea)
- Add more links to gtk-doc comments (dshea)
- Handle New_Repository name collision source spoke (#1125322) (bcl)
- Fix a bad usage of execWithRedirect (#1197290) (dshea)
- Have to be root to delete /var/tmp/kstest-* on the remote machines. (clumens)
- Use the LUKS device for swap in fstab (#1196200) (vpodzime)
- Clear TUI source spoke errors that may have been leftover from a prior
attempt. (#1192259) (sbueno+anaconda)
* Fri Feb 27 2015 Brian C. Lane <bcl@redhat.com> - 23.1-1
- Make sure python2 dnf is required (bcl)
- Fix pykickstart requirement. (clumens)
- Extract xattrs from tar payload (#1195462) (bcl)
- Add a script to rebase and merge pull requests (dshea)
- Update translation documentation for Zanata (bcl)
- Switch translation support to fedora.zanata.org (bcl)
- install.py: fix the 'is team device' check (awilliam)
- Explain why Anaconda requires rpm-devel and libarchive-devel during build
(mkolman)
- Revert "Switch to temporary transifex branch" (bcl)
- Revert "makebumpver needs to know about anaconda-1 transifex name" (bcl)
- Commit 23.0 anaconda.pot file (bcl)
- Rename queue.py to queuefactory.py. (clumens)
- Remove references to old_tests, which no longer exists. (clumens)
- Fix package and group removing with the dnf payload. (clumens)
- Don't try to run new-kernel-pkg if it doesn't exist. (clumens)
* Fri Feb 20 2015 Brian C. Lane <bcl@redhat.com> - 23.0-1
- Remove unused imports (dshea)
- Check for unused imports in __init__ files (dshea)
- Remove timestamp-based version support. (dshea)
- Add test lib methods to check regexes (dshea)
- Cleanup BuildRequires (mkolman)
- Remove obsolete imports. (amulhern)
- Make print statement print output w/out surrounding parentheses. (amulhern)
- Remove an unused import (dshea)
- rpmostreepayload: Honor noverifyssl (walters)
- typo: packaging: Don't vary name of "verified" (walters)
- Disable the metacity mouse-button-modifier setting (dshea)
- Fix completion setting in TUI language spoke. (#1192230) (sbueno+anaconda)
- Remove the pylint false positives for the GLib module (dshea)
- Use ExtendAction for --ignore flag (amulhern)
- Use a simple ExtendAction for add_rpms option. (amulhern)
- Fix log message formating (mkolman)
- Don't clear nonexistent DNF package download location (#1193121) (mkolman)
|
