Information for RPM watchdog-5.15-2.oc8.src.rpm

ID10072
Namewatchdog
Version5.15
Release2.oc8
Epoch
Archsrc
SummarySoftware and/or Hardware watchdog daemon
DescriptionThe watchdog program can be used as a powerful software watchdog daemon or may be alternately used with a hardware watchdog device such as the IPMI hardware watchdog driver interface to a resident Baseboard Management Controller (BMC). watchdog periodically writes to /dev/watchdog; the interval between writes to /dev/watchdog is configurable through settings in the watchdog sysconfig file. This configuration file is also used to set the watchdog to be used as a hardware watchdog instead of its default software watchdog operation. In either case, if the device is open but not written to within the configured time period, the watchdog timer expiration will trigger a machine reboot. When operating as a software watchdog, the ability to reboot will depend on the state of the machine and interrupts. When operating as a hardware watchdog, the machine will experience a hard reset (or whatever action was configured to be taken upon watchdog timer expiration) initiated by the BMC.
Build Time2022-05-26 13:33:32 GMT
Size245.25 KB
0fac1db5749d5d3ff7c142091c506b74
LicenseGPLv2+
Buildrootdist-oc8-build-1345-359
Provides No Provides
Obsoletes No Obsoletes
Conflicts No Conflicts
Requires
libtirpc-devel
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
systemd-units
Recommends No Recommends
Suggests No Suggests
Supplements No Supplements
Enhances No Enhances
Files
1 through 9 of 9
Name ascending sort Size
0003-watchdog-5.13-rhsel.patch1.38 KB
0004-watchdog-5.13-rhseldoc.patch5.08 KB
README.Fedora1.24 KB
README.watchdog.ipmi4.70 KB
watchdog-5.15.tar.gz222.79 KB
watchdog-ping.service218.00 B
watchdog.init1.56 KB
watchdog.service180.00 B
watchdog.spec9.27 KB
Component of No Buildroots