Information for RPM sg3_utils-1.48-2.oc9.aarch64.rpm

ID155874
Namesg3_utils
Version1.48
Release2.oc9
Epoch
Archaarch64
SummaryUtilities for devices that use SCSI command sets
DescriptionCollection of Linux utilities for devices that use the SCSI command set. Includes utilities to copy data based on "dd" syntax and semantics (called sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check mode and log pages (sginfo, sg_modes and sg_logs); spin up and down disks (sg_start); do self tests (sg_senddiag); and various other functions. See the README, ChangeLog and COVERAGE files. Requires the linux kernel 2.4 series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0) must be used. In the 2.6 series and later other device names may be used as well (e.g. /dev/sda). Also some support for NVMe devices, especially with sg_ses on NVMe enclosures. Warning: Some of these tools access the internals of your system and the incorrect usage of them may render your system inoperable.
Build Time2024-01-08 00:06:58 GMT
Size1.11 MB
c3aef2239d7b61face8e2220627a7e1a
LicenseGPL
Buildrootdist-oc9-build-63329-16463
Provides
sg3_utils = 1.48-2.oc9
sg3_utils(aarch-64) = 1.48-2.oc9
Obsoletes No Obsoletes
Conflicts No Conflicts
Requires
/usr/bin/bash
ld-linux-aarch64.so.1()(64bit)
ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)
libc.so.6()(64bit)
libc.so.6(GLIBC_2.17)(64bit)
libc.so.6(GLIBC_2.25)(64bit)
libc.so.6(GLIBC_2.32)(64bit)
libc.so.6(GLIBC_2.33)(64bit)
libc.so.6(GLIBC_2.34)(64bit)
libc.so.6(GLIBC_2.38)(64bit)
libgcc_s.so.1()(64bit)
libgcc_s.so.1(GCC_3.0)(64bit)
libgcc_s.so.1(GCC_3.3.1)(64bit)
libsgutils2-1.48.so.2()(64bit)
rpmlib(CompressedFileNames) <= 3.0.4-1
rpmlib(FileDigests) <= 4.6.0-1
rpmlib(PayloadFilesHavePrefix) <= 4.0-1
rpmlib(PayloadIsXz) <= 5.2-1
rtld(GNU_HASH)
sg3_utils-libs = 1.48-2.oc9
Recommends No Recommends
Suggests No Suggests
Supplements No Supplements
Enhances No Enhances
Files
Page:
1 through 50 of 328 >>>
Name ascending sort Size
/usr/bin/rescan-scsi-bus.sh39.45 KB
/usr/bin/scsi-rescan18.00 B
/usr/bin/scsi_logging_level8.39 KB
/usr/bin/scsi_mandat3.52 KB
/usr/bin/scsi_readcap1.30 KB
/usr/bin/scsi_ready1.10 KB
/usr/bin/scsi_satl3.74 KB
/usr/bin/scsi_start1.26 KB
/usr/bin/scsi_stop1.44 KB
/usr/bin/scsi_temperature940.00 B
/usr/bin/sg_bg_ctl195.23 KB
/usr/bin/sg_compare_and_write195.25 KB
/usr/bin/sg_copy_results199.73 KB
/usr/bin/sg_dd195.38 KB
/usr/bin/sg_decode_sense195.23 KB
/usr/bin/sg_emc_trespass195.13 KB
/usr/bin/sg_format195.27 KB
/usr/bin/sg_get_config195.22 KB
/usr/bin/sg_get_elem_status195.27 KB
/usr/bin/sg_get_lba_status195.29 KB
/usr/bin/sg_ident195.21 KB
/usr/bin/sg_inq333.12 KB
/usr/bin/sg_logs324.38 KB
/usr/bin/sg_luns195.27 KB
/usr/bin/sg_map195.18 KB
/usr/bin/sg_map26195.49 KB
/usr/bin/sg_modes195.38 KB
/usr/bin/sg_opcodes195.34 KB
/usr/bin/sg_persist195.30 KB
/usr/bin/sg_prevent195.21 KB
/usr/bin/sg_raw195.22 KB
/usr/bin/sg_rbuf195.27 KB
/usr/bin/sg_rdac195.12 KB
/usr/bin/sg_read195.20 KB
/usr/bin/sg_read_attr195.33 KB
/usr/bin/sg_read_block_limits195.23 KB
/usr/bin/sg_read_buffer195.95 KB
/usr/bin/sg_read_long195.22 KB
/usr/bin/sg_readcap195.27 KB
/usr/bin/sg_reassign195.23 KB
/usr/bin/sg_referrals195.24 KB
/usr/bin/sg_rem_rest_elem195.23 KB
/usr/bin/sg_rep_density195.23 KB
/usr/bin/sg_rep_pip195.22 KB
/usr/bin/sg_rep_zones195.34 KB
/usr/bin/sg_requests195.22 KB
/usr/bin/sg_reset195.23 KB
/usr/bin/sg_reset_wp195.23 KB
/usr/bin/sg_rmsn195.20 KB
/usr/bin/sg_rtpg195.22 KB
Component of No Buildroots